Abstract:The junction temperature online measurement of power transistors is important for both the optimal operation and reliability of power electronics converters. The real-time junction temperature during the operation of a converter can be used to monitor the health of power modules to reduce losses and increase lifetime, including degradation monitoring, maintenance scheduling or even the implementation of active thermal control. This paper summarized different methods used to measure the junction temperature of power transistors in power electronic converters. Firstly, three main methods for the temperature evaluation of power semiconductor devices are presented and discussed, their advantages and disadvantages are also analyzed. On this basis, the online junction temperature measurement methods are classified into two categories: the methods based on thermal models, and the methods based on thermo-sensitive parameters. Then, these methods and their principles are summarized. In addition, the barriers and limitations of these methods for wider scale implementation are discussed. At last, the research trends are indicated.
任磊, 沈茜, 龚春英. 电力电子电路中功率晶体管结温在线测量技术研究现状[J]. 电工技术学报, 2018, 33(8): 1750-1761.
Ren Lei, Shen Qian, Gong Chunying. Current Junction Temperature Online Measurement Techniques of Power Transistors in Power Electronic Converters. Transactions of China Electrotechnical Society, 2018, 33(8): 1750-1761.
[1] 任磊, 韦徵, 龚春英, 等. 电力电子电路功率器件故障特征参数提取技术综述[J]. 中国电机工程学报, 2015, 35(12): 3089-3101. Ren Lei, Wei Zheng, Gong Chunying, et al.Fault feature extraction techniques for power devices in power electronic converters: a review[J]. Proceedings of the CSEE, 2015, 35(12): 3089-3101. [2] Yang Shaoyong, Xiang Dawei, Angus B, et al.Condition monitoring for device reliability in power electronic converters: a review[J]. IEEE Transactions on Power Electronics, 2010, 25(11): 2734-2752. [3] GopiReddy L R, Tolbert L M, Ozpineci B. Power cycle testing of power switches: a literature survey[J]. IEEE Transactions on Power Electronics, 2015, 30(5): 2465-2473. [4] 杜雄, 李高显, 孙鹏菊, 等. 考虑基频结温波形的风电变流器可靠性评估[J]. 电工技术学报, 2015, 30(10): 258-265. Du Xiong, Li Gaoxian, Sun Pengju, et al.Reliability evaluation of wind power converters considering the fundamental frequency junction temperature fluctu- ations[J]. Transactions of China Electrotechnical Society, 2015, 30(10): 258-265. [5] Xiang Dawei, Tavner P, Bryant A, et al.Monitoring solder fatigue in a power module using case-above- ambient temperature rise[J]. IEEE Transactions on Industry Applications, 2011, 47(6): 2578-2591. [6] Xiang Dawei, Ran Li, Tavner P, et al.Condition monitoring power module solder fatigue using inverter harmonic identification[J]. IEEE Transa- ctions on Power Electronics, 2012, 27(1): 235-247. [7] Nasrin M S, Khan F H, Alam M K.Quantifying device degradation in live power converters using SSTDR assisted impedance matrix[J]. IEEE Transa- ctions on Power Electronics, 2014, 29(6): 3116-3131. [8] Dustin A M, Jose E R T, Jeffrey J C, et al. Active thermal control of power electroic modules[J]. IEEE Transactions on Industry Applications, 2006, 42(2): 552-558. [9] Dusmez S, Akin B.An active life extension strategy for thermally aged power switches based on the pulse-width adjustment method in interleaved con- verters[J]. IEEE Transactions on Power Electronics, 2016, 31(7): 5149-5160. [10] Ma Ke, Liserre M, Blaabjerg F.Reactive power influence on the thermal cycling of multi-MW wind power inverter[J]. IEEE Transactions on Industry Applications, 2013, 49(2): 922-930. [11] Avenas Y V, Dupont L, Khatir Z.Temperature measurement of power semiconductor devices by thermo-sensitive electrical parameters—a review[J]. IEEE Transactions on Power Electronics, 2012, 27(6): 3081-3092. [12] Aarebski J, Górecki K.The electrothermal large- signal model of power MOS transistors of SPICE[J]. IEEE Transactions on Power Electronics, 2010, 25(5): 1265-1274. [13] Brückner T, Bernet S.Estimation and measurement of junction temperature in a three-level voltage source converter[J]. IEEE Transactions on Power Electronics, 2007, 22(1): 3-12. [14] Volle F, Garimella S V, Juds M A.Thermal management of a soft starter: transient thermal impedance model and performance enhancements using phase change materials[J]. IEEE Transactions on Power Electronics, 2010, 25(6): 1395-1405. [15] Du Bin, Hudgins J L, Santi E, et al.Transient electrothermal simulation of power semiconductor devices[J]. IEEE Transactions on Power Electronics, 2010, 25(1): 237-248. [16] Brekel W, Duetemeyer T, Puk G.et al.Time resolved in situ Tvj measurements of 6.5kV IGBT during inverter operation[C]//International Exhibition and Conference for Power Electronics Europe, Nuremberg, Germany, 2009: 806-813. [17] Fiege G B M, Niedernostheide F J, Schulze H J, et al. Thermal characterization of power devices by scanning thermal microscopy techniques[J]. Micro- electronics Reliability, 1999, 39(6-7): 1149-1152. [18] Khatir Z, Dupont L, Ibrahim A.Investigations on junction temperature estimation based on junction voltage measurements[J]. Microelectronics Reliabi- lity, 2010, 50: 1506-1510. [19] Nowak M, Rabkowski J, Barlik R.Measurement of temperature sensitive parameter characteristics of semiconductor silicon and silicon-carbide power devices[C]//The 13th Power Electronic Motion Control Conference, Poznan, Poland, 2008: 84-87. [20] Barlini D, Ciappa M, Castellazzi A, et al.New technique for the measurement of the static and of the transient junction temperature[J]. Microelectronics Reliability, 2006, 46(9): 1772-1777. [21] Kuhn H, Mertens A.On-line junction temperature measurement of IGBTs based on temperature sensitive electrical parameters[C]//The 13th Power Electronics Application Conference Europe, Barcelona, Spain, 2009: 1-10. [22] 杜雄, 李高显, 吴军科, 等. 一种用于风电变流器可靠性评估的结温数值计算方法[J]. 中国电机工程学报, 2015, 35(11): 2813-2821. Du Xiong, Li Gaoxian, Wu Junke, et al.A junction temperature numerical calculation method for reliability evaluation in wind power converters[J]. Proceedings of the CSEE, 2015, 35(11): 2813-2821. [23] 杜雄, 李高显, 刘洪纪, 等. 风速概率分布对风电变流器中功率器件寿命的影响[J]. 电工技术学报, 2015, 30(15): 109-117. Du Xiong, Li Gaoxian, Liu Hongji, et al.Effect of wind speed probability distribution on lifetime of power semiconductors in the wind power con- verters[J]. Transactions of China Electrotechnical Society, 2015, 30(15): 109-117. [24] 魏克新, 杜明星. 基于集总参数法的IGBT模块温度预测模型[J]. 电工技术学报, 2011, 26(12): 79-84. Wei Kexin, Du Mingxing.Temperature prediction model of IGBT modules based on lumped parameters method[J]. Transactions of China Electrotechnical Society, 2011, 26(12): 79-84. [25] Yu Youmin, Tien Y T L, Chiriac V A. Compact thermal resistor-capacitor-network approach to predicting transient junction temperature of a power amplifier module[J]. IEEE Transactions on Com- ponents, Packaging and Manufacturing Technology, 2012, 2(7): 1172-1181. [26] Rencz M, Székely V.Dynamic Thermal multiport modeling of IC packages[J]. IEEE Transactions on Components and Packaging Technologies, 2001, 24(4): 596-604. [27] Górecki K, Aarebski J.Nonlinear compact thermal model of power semiconductor devices[J]. IEEE Transactions on Components and Packaging Tech- nologies, 2010, 33(3): 643-647. [28] Du B, Hudgin J L, Santi E, et al.Transient eletrothermal simulation of power semiconductor devices[J]. IEEE Transactions on Power Electronics, 2010, 25(1): 237-248. [29] Zarebski J, Górecki K.The electrothermal large- signal model of power MOS Transistors for SPICE[J]. IEEE Transactions on Power Electronics, 2010, 25(5): 1265-1274. [30] Smet V, Forest F, Huselstein J J, et al.Evaluation of Vce monitoring as a real-time method to estimate aging of bond wire-IGBT modules stressed by power cycling[J]. IEEE Transactions on Industrial Electro- nics, 2013, 60(7): 2760-2770. [31] Gelagaev R, Jacqmaer P, Driesen J.A fast voltage clamp circuit for the accurate measurement of the dynamic on-resistance of power transistors[J]. IEEE Transactions on Industrial Electronics, 2015, 62(2): 1241-1250. [32] Chen Huifeng, Ji Bing, Pickert V, et al.Real-time temperature estimation for power MOSFETs con- sidering thermal aging effects[J]. IEEE Transactions on Device and Materials Reliability, 2014, 14(1): 220-228. [33] Ammous A, Allard B, Morel H.Transient temperature measurements and modeling of IGBT’s under short circuit[J]. IEEE Transactions on Power Electronics, 1998, 13(1): 12-25. [34] Backer N, Stig M N, Francesco, et al. IGBT junction temperature measurement via peak gate current[J]. IEEE Transactions on Power Electronics, 2016, 31(5): 3784-3793. [35] Wang Jianjing, Henry S H C, Li R T H. Characterization and experimental assessment of the effects of parasitic elements on the MOSFET switching performance[J]. IEEE Transactions on Power Electronics, 2013, 28(1): 573-590. [36] Barlini D, Ciappa M, Guyennet M M, et al.Measurement of the transient junction temperature in MOSFET devices under operating conditions[J]. Microelectronics Reliability, 2007, 47: 1707-1712. [37] 孙鹏飞, 罗皓泽, 董玉斐, 等. 基于关断延时时间的大功率IGBT模块结温提取方法的研究[J]. 中国电机工程学报, 2015, 35(13): 3366-3372. Sun Pengfei, Luo Haoze, Dong Yufei, et al.Junction temperature extraction of high power IGBT module based on turn-off delay time[J]. Proceedings of the CSEE, 2015, 35(13): 3366-3372. [38] Sundaramoorthy V K, Bianda E, Bloch R, et al.A study on IGBT junction temperature (Tj) online estimation using gate-emitter voltage (Vge) at turn- off[J]. Microelectronics Reliability, 2014, 54(11): 2423-2431. [39] 方化潮, 郑利兵, 王春雷, 等. IGBT模块栅极电压米勒平台时延与结温的关系[J]. 电工技术学报, 2016, 31(18): 134-141. Fang Huachao, Zheng Libing, Wang Chunlei, et al.The relationship between junction temperature and time delay of gate voltage miller plateau of IGBT module[J]. Transactions of China Electrotechnical Society, 2016, 31(18): 134-141. [40] Bryant A, Yang S Y, Mawby P, et al.Investigation into IGBT dV/dt during turn-off and its temperature dependence[J]. IEEE Transactions on Power Elec- tronics, 2011, 26(10): 3019-3031. [41] Xu Zhuxian, Xu Fan, Wang Fei.Junction temperature measurement of IGBTs using short-circuit current as a temperature using short-circuit current as a temperature-sensitive electrical parameter for con- verter prototype evaluation[J]. IEEE Transactions on Industrial Electronics, 2015, 62(6): 3419-3429. [42] Luo Haoze, He Xiangning.Online high-power P-i-N diode chip temperature extraction and prediction method with maximum recovery current di/dt[J]. IEEE Transactions on Power Electronics, 2015, 30(5): 2395-2404.