Design of Broadband Hybrid EMI Filter in Synchronous Buck DC-DC Converter with SiC MOSFETs
Xu Haodong1, Luo Siyong2, Bi Chuang2, Sun Weiwei3, Zhao Haiying4, Liu Jiaojian1
1. State Grid Shaanxi Electric Power Research Institute Xi'an 710100 China;
2. School of Aeronautics and Astronautics/Aircraft Swarm Intelligent Sensing and Cooperative Control Key Laboratory of Sichuan Province University of Electronic and Technology of China Chengdu 611731 China;
3. State Grid Shaanxi Electric Power Marketing Service Center Xi'an 710100 China;
4. State Grid Xi'an South Power Supply Company Xi'an 710061 China
The high dv/dt and di/dt are generated by power electronic devices, such as SiC MOSFETs and GaN MOSFETs, during power converter switching, causing serious electromagnetic interference (EMI) problems. Therefore, EMI filter design has become a hot spot in EMI research. The traditional passive EMI filter (PEF) can effectively reduce EMI generated by DC-DC converters. Because of safety restrictions on the Y capacitor, a large-volume common-mode (CM) choke is usually used to suppress low-frequency EMI. Then, active EMI filters (AEF) are efficacious in improving the power density of power converters due to their excellent low- frequency EMI attenuation characteristics. According to the high-frequency EMI attenuation characteristics of PEF and low-frequency EMI attenuation characteristics of AEF, hybrid EMI filters (HEF) have become the mainstream for EMI suppression. Because of the demand for high power density, the size and weight of the electronic components of HEF must be considered by standardizing HEF design.
Firstly, an EMI model of the synchronous Buck DC-DC converter is proposed. Common-mode (CM) and differential-mode (DM) noise source impedance models are analyzed, and CM and DM impedances are determined. Then, the CM/DM noise source of the synchronous Buck DC-DC converter is measured using a line impedance stabilization network (LISN). Secondly, according to the insertion loss (IL) requirements, a hybrid EMI filter design method is proposed. Based on the EMI model of the synchronous Buck DC-DC converter, an HEF topology is selected, and the parameters of HEF components are quantitatively designed to achieve the required IL. Finally, the topologies of PEF and AEF are analyzed, and their IL is obtained theoretically. The topology and IL of HEF are studied for the filter design.
The results show that CM noise dominates in the synchronous Buck DC-DC converter, and CL structure and π-type PEF structure effectively suppress CM and DM noises, respectively. The current-sensing current- compensating (CSCC) AEF is selected to further suppress CM noise based on noise source impedance and load impedance characteristics. Under selected parameter values of HEF components, the calculated passive DM IL and hybrid CM IL meet HEF design requirements. The experimental results show that the EMI noise suppression effect is better with the addition of the hybrid EMI filter, achieving an average suppression of nearly 35 dB across the frequency band (150 kHz~30 MHz). Adding an HEF into a power converter decreases system efficiency by an average of 1.24%.
The following conclusions can be drawn: combined with CM and DM noise source circuit models of the synchronous Buck DC-DC converter, CM and DM impedance characteristics can be obtained. Through the theoretical analysis of IL of the HEF circuit topology, the design process of the hybrid EMI filter is presented, and the parameters of EMI filter components can be quantitatively designed. The proposed broadband design method of HEF can meet the EMC standard and improve the power density of the system, which has high engineering application value.
徐浩东, 罗嗣勇, 毕闯, 孙渭薇, 赵海英, 刘娇健. 基于SiC MOSFET同步Buck DC-DC变换器的宽频混合EMI滤波器设计[J]. 电工技术学报, 2024, 39(10): 3060-3069.
Xu Haodong, Luo Siyong, Bi Chuang, Sun Weiwei, Zhao Haiying, Liu Jiaojian. Design of Broadband Hybrid EMI Filter in Synchronous Buck DC-DC Converter with SiC MOSFETs. Transactions of China Electrotechnical Society, 2024, 39(10): 3060-3069.
[1] 何杰, 刘钰山, 毕大强, 等. 开关变换器传导干扰抑制策略综述[J]. 电工技术学报, 2022, 37(6): 1455-1472.
He Jie, Liu Yushan, Bi Daqiang, et al.Review of conducted electromagnetic interference suppression strategies for switching converters[J]. Transactions of China Electrotechnical Society, 2022, 37(6): 1455-1472.
[2] Ogasawara S, Akagi H.Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems[J]. IEEE Transactions on Industry Applications, 1996, 32(5): 1105-1114.
[3] Skibinski G L, Kerkman R J, Schlegel D.EMI emissions of modern PWM AC drives[J]. IEEE Industry Applications Magazine, 1999, 5(6): 47-80.
[4] 郭凯. 宽频带混合EMI电源滤波器设计[D]. 西安: 电子科技大学, 2021.
[5] Nave M J.Power line filter design for switched-mode supplies[M]. New York, NY, USA: Van Nostrand Reinhold, 1991.
[6] Fang Zhihao, Jiang Dong, Zhang Yechi.Study of the characteristics and suppression of EMI of inverter with SiC and Si devices[J]. Chinese Journal of Electrical Engineering, 2018, 4(3): 37-46.
[7] Son Y C, Sul S K.Generalization of active filters for EMI reduction and harmonics compensation[J]. IEEE Transactions on Industry Applications, 2006, 42(2): 545-551.
[8] Chen Wenjie, Yang Xu, Wang Zhaoan.Analysis of insertion loss and impedance compatibility of hybrid EMI filter based on equivalent circuit model[J]. IEEE Transactions on Industrial Electronics, 2007, 54(4): 2057-2064.
[9] Zhang Yechi, Jiang Dong.An active EMI filter in grounding circuit for DC side CM EMI suppression in motor drive system[J]. IEEE Transactions on Power Electronics, 2022, 37(3): 2983-2992.
[10] 李景灏, 吴爱国. 基于离散趋近律与无差拍双闭环结构的单相LCL型PWM整流器控制策略[J]. 电工技术学报, 2021, 36(6): 1290-1303.
Li Jinghao, Wu Aiguo.A double closed-loop control method for single-phase PWM rectifiers with LCL filter based on discrete reaching law and deadbeat algorithm[J]. Transactions of China Electrotechnical Society, 2021, 36(6): 1290-1303.
[11] 张洪亮, 张子成, 陈杰, 等. 自适应三次谐波注入的回接型LCL光伏逆变器共模谐振电流抑制方法[J]. 电工技术学报, 2023, 38(1): 220-233.
Zhang Hongliang, Zhang Zicheng, Chen Jie, et al.Common-mode resonant current suppression for back- connected LCL photovoltaic inverter using adaptive third harmonic injection[J]. Transactions of China Electrotechnical Society, 2023, 38(1): 220-233.
[12] 江师齐, 王卫, 王盼宝, 等. 一种结构对称型电磁集成电磁干扰滤波器分析与设计[J]. 电工技术学报, 2022, 37(22): 5826-5835.
Jiang Shiqi, Wang Wei, Wang Panbao, et al.Analysis and prototyping of the electromagnetic integration of a structure-symmetrical electromagnetic interference filter[J]. Transactions of China Electrotechnical Society, 2022, 37(22): 5826-5835.
[13] Goswami R, Wang Shuo.Modeling and stability analysis of active differential-mode EMI filters for AC/DC power converters[J]. IEEE Transactions on Power Electronics, 2018, 33(12): 10277-10291.
[14] 何宇, 漆汉宏, 邓小龙. 基于全复数型滤波器的三相锁相环技术[J]. 电工技术学报, 2021, 36(10): 2115-2126.
He Yu, Qi Hanhong, Deng Xiaolong.A three-phase phase-locked loop technique based on all complex coefficient filter[J]. Transactions of China Electro- technical Society, 2021, 36(10): 2115-2126.
[15] 刘亚静, 段超. 全数字自适应滤波器不同离散结构的性能对比分析[J]. 电工技术学报, 2021, 36(20): 4339-4349.
Liu Yajing, Duan Chao.Performance comparison and analysis of all-digital adaptive filter with different discrete methods[J]. Transactions of China Electro- technical Society, 2021, 36(20): 4339-4349.
[16] Heldwein M L, Ertl H, Biela J, et al.Implementation of a transformerless common-mode active filter for offline converter systems[J]. IEEE Transactions on Industrial Electronics, 2010, 57(5): 1772-1786.
[17] Takahashi S, Ogasawara S, Takemoto M, et al.Common-mode voltage attenuation of an active common-mode filter in a motor drive system fed by a PWM inverter[J]. IEEE Transactions on Industry Applications, 2019, 55(3): 2721-2730.
[18] Lee C K, Xu Danting, Pong B M H, et al. A three- winding common mode inductor[J]. IEEE Transa- ctions on Power Electronics, 2017, 32(7): 5180-5187.
[19] Maillet Y, Lai Rixin, Wang Shuo, et al.High-density EMI filter design for DC-fed motor drives[J]. IEEE Transactions on Power Electronics, 2010, 25(5): 1163-1172.
[20] Ala G, Giaconia G C, Giglia G, et al.Design and performance evaluation of a high power-density EMI filter for PWM inverter-fed induction-motor drives[J]. IEEE Transactions on Industry Applications, 2016, 52(3): 2397-2404.
[21] Giglia G, Ala G, Di Piazza M, et al.Automatic EMI filter design for power electronic converters oriented to high power density[J]. Electronics, 2018, 7(1): 1-16.
[22] Vedde A, Neuburger M, Reuss H C.An optimized high-frequency EMI filter design for an automotive DC/DC-converter[C]//2021 National Power Electro- nics Conference (NPEC), Bhubaneswar, India, 2022: 1-6.
[23] 彭金融, 毛行奎, 崔文玲, 等. 基于插入无源二端口网络的噪声源阻抗提取方法研究[J]. 电工技术学报, 2023, 38(2): 523-532.
Peng Jinrong, Mao Xingkui, Cui Wenling, et al.Research on noise soure impedance extraction method based on inserting passive two-port network[J]. Transactions of China Electrotechnical Society, 2023, 38(2): 523-532.
[24] Narayanasamy B, Luo Fang, Chu Yongbin.Modeling and stability analysis of voltage sensing based differential mode active EMI filters for AC-DC power converters[C]//2018 IEEE Symposium on Electro- magnetic Compatibility, Signal Integrity and Power Integrity, Long Beach, CA, USA, 2018: 322-328.
[25] Jiang Shiqi, Liu Yitao, Liang Weihua, et al.Active EMI filter design with a modified LCL-LC filter for single-phase grid-connected inverter in vehicle-to- grid application[J]. IEEE Transactions on Vehicular Technology, 2019, 68(11): 10639-10650.
[26] Han Yongjie, Wu Zhihong, Wu Deliang.Hybrid common-mode EMI filter design for electric vehicle traction inverters[J]. Chinese Journal of Electrical Engineering, 2022, 8(4): 52-60.