电工技术学报  2019, Vol. 34 Issue (24): 5252-5261    DOI: 10.19595/j.cnki.1000-6753.tces.181671
高电压与绝缘 |
SEBS/PP复合材料抗水树枝性能研究
高铭泽, 赵洪, 吕洪雷, 陈俊岐, 郑昌佶
工程电介质及其应用技术教育部重点实验室(哈尔滨理工大学) 哈尔滨 150080
Study on Anti-Water-Treeing Performance of SEBS/PP Composites
Gao Mingze, Zhao Hong, Lü Honglei, Chen Junqi, Zheng ChangJi
Key Lab of Engineering Dielectrics and their Application Ministry of Education Harbin University of Science and Technology Harbin 150080 China
全文: PDF (60742 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 该文采用水刀电极法对苯乙烯嵌段共聚物(SEBS)/聚丙烯(PP)复合材料和低密度聚乙烯(LDPE)进行加速水树枝老化实验,并通过结晶特性和力学特性实验对两者在抗水树特性上的差异进行分析。通过偏光显微镜(PLM)、差示扫描量热仪(DSC)和扫描电子显微镜(SEM)分别对材料的水树枝形貌和球晶结构、熔融-结晶特性以及片晶结构进行观察与分析,并选用动态热机械分析仪(DMA)和电子拉力机分别研究材料的动态松弛特性和应力-应变特性。水刀电极法结果显示,高结晶度的PP与非结晶的弹性体SEBS没有发生水树枝老化,而SEBS/PP复合材料虽然出现水树枝结构,但其尺寸仍明显低于LDPE。结晶特性与力学特性实验结果显示,与LDPE相比,PP具有较高的结晶度与结晶尺寸,并且具有较高的机械强度和较低的动态松弛损耗因数;SEBS在复合体系中以“岛”相存在,PP片晶变细变短,并且其球晶边界也变得模糊,体现出更强的非晶特性,导致PP片晶之间在外力作用下的抗滑移能力降低。分析认为,SEBS/PP较高的结晶度和由力学性能体现出的片晶之间较强的抗滑移能力是其抑制水树枝生长能力优于LDPE的主要原因。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
关键词 SEBS/PP复合材料水刀电极法结晶特性动态热机械分析应力应变特性    
Abstract:The water blade electrode method was applied to accelerate water-tree aging of SEBS (styrene-ethylene/butylene-styrene triblock copolymer)/PP (polypropylene) composites and LDPE (low density polyethylene), and their differences in anti-water-treeing performance were analyzed through crystallization and mechanical properties experiments. The water tree morphology, spherulitic structure, melting-crystallization characteristics and lamella structure of the materials were obtained by PLM (polarizing microscope), DSC (differential scanning calorimeter) and SEM (scanning electron microscope), respectively. In addition, the dynamic relaxation characteristics and stress-strain characteristics of the material were studied by DMA (dynamic thermomechanical analyzer) and electronic tensile machine respectively. The results of water blade electrode method show that there is no water-tree aging phenomenon appears in PP with high crystallinity and elastomer SEBS. Although SEBS/PP composites have water tree structure after accelerate water tree aging experiments, its water tree size is significantly lower than that of LDPE. It indicates from crystallization and mechanical properties that PP has larger crystal size, higher mechanical strength and lower dynamic relaxation loss factor compared with LDPE. The SEBS exists as "islands" in the composite material. The PP lamella is shortened and its spherulite boundary is blurred due to the addition of SEBS. Moreover, the anti-sliding ability of PP will decrease under external force in the existence of SEBS. The main reason for SEBS/PP composite has better anti-water-aging performance than LDPE is that the former has higher crystallinity and stronger anti-slip ability between lamella reflected by crystallization and mechanical properties experiments.
Key wordsStyrene-ethylene/butylene-styrene triblock copolymer/polypropylene composite    water blade electrode method    crystallization characteristics    dynamic thermomechanical analysis    stress- strain characteristic   
收稿日期: 2018-10-17      出版日期: 2019-12-30
PACS: TM85  
通讯作者: 赵洪, 男,1955年生,教授,博士生导师,研究方向为高电压与绝缘技术。E-mail:hongzhao@hrhust.edu.cn   
作者简介: 高铭泽,女,1987年生,博士研究生,研究方向为高电压与绝缘技术。E-mail:664081400@qq.com
引用本文:   
高铭泽, 赵洪, 吕洪雷, 陈俊岐, 郑昌佶. SEBS/PP复合材料抗水树枝性能研究[J]. 电工技术学报, 2019, 34(24): 5252-5261. Gao Mingze, Zhao Hong, Lü Honglei, Chen Junqi, Zheng ChangJi. Study on Anti-Water-Treeing Performance of SEBS/PP Composites. Transactions of China Electrotechnical Society, 2019, 34(24): 5252-5261.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.181671          https://dgjsxb.ces-transaction.com/CN/Y2019/V34/I24/5252