电工技术学报  2022, Vol. 37 Issue (12): 3048-3060    DOI: 10.19595/j.cnki.1000-6753.tces.211799
电力电子 |
一种中压绝缘大功率中频变压器的优化设计方法
王佳宁, 邹强, 胡嘉汶, 裴伟, 赵玉顺
合肥工业大学电气与自动化工程学院 合肥 230009
An Optimal Design Method for Medium-Voltage Insulated High-Power Medium-Frequency Transformer
Wang Jianing, Zou Qiang, Hu Jiawen, Pei Wei, Zhao Yushun
College of Electrical Engineering and Automation Hefei University of Technology Hefei 230009 China
全文: PDF (8761 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 应用于光伏并网系统的中压绝缘大功率中频变压器(MFT)不仅要求其高低压侧绕组之间需要满足较大的绝缘间距,而且其内部也需要浇注隔热的绝缘材料。然而,这会导致MFT出现电磁干扰现象严重、散热困难等问题。针对这些问题,该文提出一种全面考虑铁心尺寸、绕组线径和绕组排布结构的MFT优化设计方法。该方法通过面积乘积(AP)法确定铁心体积,再通过自由变量扫描对MFT进行损耗最小化设计。基于有限元仿真软件,验证了该优化设计方法可使变压器漏电感减小及周围的电磁干扰区域缩小。最后,通过该优化设计方法设计一台200kW/ 30kHz的MFT,并制作了样机。通过理论和实验的对比,验证了优化设计方法的有效性和准确性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
王佳宁
邹强
胡嘉汶
裴伟
赵玉顺
关键词 大功率中频变压器绝缘面积乘积法损耗建模优化设计电磁干扰有限元仿真    
Abstract:The medium-voltage insulated high-power medium-frequency transformer (MFT) used in photovoltaic grid-connected systems not only requires a large insulation distance between the high and low voltage side windings, but also needs to be poured with thermal-protective insulating materials inside. However, it can lead to problems such as serious electromagnetic interference and difficult heat dissipation in the MFT. Therefore, this paper proposes an MFT optimal design method that fully considers the core size, winding wire diameter and winding arrangement structure. In this method, the core volume is determined by the area product (AP) method, and then the loss of the MFT is minimized by free variable scanning. Based on the finite element simulation software, it is verified that the optimized design method will also reduce the electromagnetic interference area around the transformer. Finally, a 200kW/30kHz MFT was designed through the optimized design method, and a prototype was made. The comparison between theory and experiment verifies the optimized design method.
Key wordsHigh-power medium-frequency transformer    insulation    area product method    loss modeling    optimal design    electromagnetic interference    finite element simulation   
收稿日期: 2021-11-04     
PACS: TM432  
基金资助:国家自然科学基金面上项目(52077051)、合肥综合性国家科学中心能源研究院项目(19KZS207, 21KZS203)和高等学校学科创新引智计划项目(BP0719039)资助
通讯作者: 胡嘉汶 男,1997年生,硕士研究生,研究方向为多相LLC谐振变换器设计与大功率中频变压器的优化设计。E-mail: hjw970604@qq.com   
作者简介: 王佳宁 男,1985年生,副教授,研究方向为电力设备的封装和可靠性测试、电力电子转换器的集成、宽带隙电力设备的应用、电磁建模。E-mail: 16002530@163.com
引用本文:   
王佳宁, 邹强, 胡嘉汶, 裴伟, 赵玉顺. 一种中压绝缘大功率中频变压器的优化设计方法[J]. 电工技术学报, 2022, 37(12): 3048-3060. Wang Jianing, Zou Qiang, Hu Jiawen, Pei Wei, Zhao Yushun. An Optimal Design Method for Medium-Voltage Insulated High-Power Medium-Frequency Transformer. Transactions of China Electrotechnical Society, 2022, 37(12): 3048-3060.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.211799          https://dgjsxb.ces-transaction.com/CN/Y2022/V37/I12/3048