电工技术学报  2018, Vol. 33 Issue (17): 4102-4112    DOI: 10.19595/j.cnki.1000-6753.tces.171123
电机与电器 |
电磁斥力机构的参数匹配与优化设计
温伟杰1, 李斌1, 李博通1, 黄瑜珑2, 贾懿妮3
1. 智能电网教育部重点实验室(天津大学) 天津 300072;
2. 电力系统及发电设备控制和仿真国家重点实验室(清华大学电机系) 北京 100084;
3. 国网北京市电力公司 北京 100031
Parameters Matching and Optimal Design of the Electromagnetic Repulsion Mechanism
Wen Weijie1, Li Bin1, Li Botong1, Huang Yulong2, Jia Yini3
1. Key Laboratory of Smart Grid of Ministry of Education Tianjin University Tianjin 300072 China;
2. State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing 100084 China;
3. Beijing Electric Power Corporation Beijing 100031 China
全文: PDF (27927 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 基于电磁斥力机构的快速开关是直流断路器中的关键设备,其操动速度直接决定了直流断路器的动作时间。该文针对电磁斥力机构的参数匹配特性和优化设计方法展开研究。首先,通过将金属盘等效为单匝线圈对电磁斥力机构的仿真模型进行了简化;搭建了40.5 kV快速真空开关样机,基于样机试验验证了仿真模型的有效性。然后,基于简化后的仿真模型,将影响电磁斥力机构操动特性的多个变量凝练为3个与操动特性直接相关的特征参量,得到了电磁斥力机构的参数匹配规律并从解析角度给出了解释。最后,基于参数匹配规律,提出了电磁斥力机构参数设计原则,进而得到了一种快速而有效的电磁斥力机构参数优化设计方法。在满足快速开关设计要求的前提下,该设计方法可实现电磁力峰值最小和操动效率最高的综合优化目标,为快速开关向高电压及快速性方向发展奠定了基础。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
温伟杰
李斌
李博通
黄瑜珑
贾懿妮
关键词 电磁斥力机构快速开关参数匹配优化设计    
Abstract:The ultra-fast mechanical switch driven by electromagnetic repulsion mechanism (ERM) is the key equipment in direct current circuit breaker (DCCB). This paper is focused on researches on the parameters matching of ERM and its optimal design. First, with the metal disk in ERM equivalent to a single-turn coil, the mathematical model of ERM based on equivalent circuit method is simplified. Experiments on the 40.5 kV ultra-fast vacuum switch prototype developed in the Lab. have been carried out, and the test results have shown that the simplified mathematical model of ERM is efficient. Then, based on the simplified mathematical model, the parameters matching characteristics are studied, and three independent parameters that have direct effects on drive characteristics of ERM have been extracted. In the end, by taking the reliability and the cost of ERM into consideration, parameters matching rules of EMR have been proposed, and a novel fast and effective optimal design method of ERM is developed in this paper.
Key wordsElectromagnetic repulsion mechanism    fast switch    parameters matching    optimal design   
收稿日期: 2017-08-01      出版日期: 2018-09-14
PACS: TM561  
基金资助:中国博士后科学基金项目(2017M621071,2018T110198)和国家自然科学基金项目(51677126,51677095)资助
通讯作者: 李斌 男,1976年生,教授,博士生导师,研究方向为电力系统保护与控制。   
作者简介: 温伟杰 女,1989年生,博士,讲师,研究方向为快速开关、直流电网及其关键设备。E-mail:weijie.wen@tju.edu.cn
引用本文:   
温伟杰, 李斌, 李博通, 黄瑜珑, 贾懿妮. 电磁斥力机构的参数匹配与优化设计[J]. 电工技术学报, 2018, 33(17): 4102-4112. Wen Weijie, Li Bin, Li Botong, Huang Yulong, Jia Yini. Parameters Matching and Optimal Design of the Electromagnetic Repulsion Mechanism. Transactions of China Electrotechnical Society, 2018, 33(17): 4102-4112.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.171123          https://dgjsxb.ces-transaction.com/CN/Y2018/V33/I17/4102