Parameters Determination and Electromagnetic Field Analysis of Canned Solid-Rotor Induction Motor(1): An Overview of Motor’s Equivalent Circuit and Its Parameter Analysis Method
Ling Zaixun1,2, Zhou Libing1, Zhang Yi3, Li Langru1
1. State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan 430074 China; 2. State Grid Hubei Electric Power Research Institute Wuhan 430077 China; 3. State Grid Hubei Maintenance Company Wuhan 430050 China
Abstract：Because of its reliable operation and good mechanical properties, the canned solid-rotor induction motor (CSRIM) has a good application prospect in shielding equipment such as nuclear equipment and chemical industry. However, for CSRIM, especially with the magnetic rotor shielded sleeve, the electromagnetic field distribution of the rotor is more complicated due to the closure of a large number of magnetic leakage. In this paper, the current method of equivalent circuit and its parameter analysis for the canned solid-rotor induction motor were discussed. The development of equivalent circuit of composite-rotor induction motor and the deficiency of each equivalent circuit were studied. Finally, this paper focused on the comparative analysis of the advantages and disadvantages of the equivalent magnetic circuit method, 2D-multilayer electromagnetic field theory and the electromagnetic field finite element method on the parameter calculation and performance analysis of the CSRIM.
凌在汛, 周理兵, 张毅, 李朗如. 笼型实心转子屏蔽感应电机电磁场及参数研究（一）：等效电路及其参数分析[J]. 电工技术学报, 2018, 33(15): 3518-3526.
Ling Zaixun, Zhou Libing, Zhang Yi, Li Langru. Parameters Determination and Electromagnetic Field Analysis of Canned Solid-Rotor Induction Motor(1): An Overview of Motor’s Equivalent Circuit and Its Parameter Analysis Method. Transactions of China Electrotechnical Society, 2018, 33(15): 3518-3526.
[1] 黄国治, 傅丰礼. 中小旋转电机设计手册[M]. 2版. 北京: 中国电力出版社, 2014. [2] Liang Yanping, Hu Yonglu, Liu Xin, et al.Calculation and analysis of can losses of canned induction motor[J]. IEEE Transactions on Industrial Electronics, 2014, 61(9): 4531-4538. [3] Valtonen M, Parviainen A, Pyrhonen J.The effects of the number of rotor slots on the performance characteristics of axial-flux aluminium-cage solid-rotor core induction motor[C]//IEEE International Electric Machines & Drives Conference, Antalya, Turkey, 2007: 668-672. [4] 张明玉. 复合转子异步电机的电磁理论及实用计算方法研究[D]. 武汉: 华中理工大学, 1993. [5] 陈世坤. 电机设计[M]. 北京: 机械工业出版社, 2000. [6] Boglietti A, Cavagnino A, Lazzari M.Computational algorithms for induction motor equivalent circuit parameter determination—part II: skin effect and magnetizing characteristics[J]. IEEE Transactions on Industrial Electronics, 2011, 58(9): 3734-3740. [7] Boglietti A, Cavagnino A, Lazzari M.Computational algorithms for induction-motor equivalent circuit parameter determination—part I: resistances and leakage reactances[J]. IEEE Transactions on Industrial Electronics, 2011, 58(9): 3723-3733. [8] Yamada H. Analysis and equivalent circuit of solid rotor induction motor with enclosed slots[J]. Electrical Engineers of Japan, 1972, 92-B(4): 277-286. [9] Yamada H.Calculation of field and reactance in enclosed-slot induction motor[J]. IEEE Transactions on Magnetics, 1979, 15(6): 1476-1478. [10] Yamada H.Calculation of torque characteristics of solid rotor induction motor[J]. Electrical Engineers of Japan, 1970, 90(3): 439-448. [11] Yamada H.Equivalent circuit of the induction motor with a double-layer solid rotor[J]. Electrical Engineers of Japan, 1970, 90(5): 947-955. [12] Yamada H.Flux distribution and reactance in enclosed-slot solid rotor induction motors[J]. Electric Machines & Power Systems, 2007, 6(3): 215-224. [13] Yamada H.Loss calculation of double layer solid rotor induction motor[J]. Electrical Engineers of Japan, 1971, 91(6): 1128-1136. [14] Yamada H, Fujibayashi K, Ito K, et al. Calculation of loss in solid-salient-pole machine[J]. IEEE Transactions on Power Apparatus and Systems, 1984, PAS-103(6): 1355-1362. [15] Ergene L T, Salon S J.Determining the equivalent circuit parameters of canned solid-rotor induction motors[J]. IEEE Transactions on Magnetics, 2005, 41(7): 2281-2286. [16] Alger P L.Induction machines their behavior and uses[M]. New York: Gordon and Breach, 1970. [17] 孙桂瑛, 邹继斌, 李连锋, 等. 屏蔽电机的磁场与屏蔽层损耗的解析计算[J]. 哈尔滨工业大学学报, 1999, 31(4): 30-33. Sun Guiying, Zou Jibin, Li Lianfeng, et al.Calculation of magnetic field and shield loss for shield motor[J]. Journal of Harbin Institute of Technology, 1999, 31(4): 30-33. [18] Woolley I, Chalmers B J.End effects in unlaminated-rotor induction machines[J]. Proceedings of the Institution of Electrical Engineers, 1973, 120(6): 641-646. [19] Chalmers B J, Woolley I.General theory of solid-rotor induction machines[J]. Proceedings of the Institution of Electrical Engineers, 1972, 119(9): 1301-1308. [20] Chalmers B J, Herman J.Induction-motor fan drive with unlaminated rotor and heat-pipe cooling[J]. Proceedings of the Institution of Electrical Engineers, 1977, 124(5): 449-454. [21] Woolley I, Chalmers B J.Internal design of unlaminated-rotor induction machines[J]. Proceedings of the Institution of Electrical Engineers, 1974, 121(3): 197-202. [22] Gieras J, Dawson G, Eastham A.Performance calculation for single-sided linear induction motors with a double-layer reaction rail under constant current excitation[J]. IEEE Transactions on Magnetics, 1986, 22(1): 54-62. [23] Gieras J, Dawson G, Eastham A.Performance calculation for single-sided linear induction motors with a solid steel reaction plate under constant current excitation[J]. IEE Proceedings B-Electric Power Applications, 1985, 132(4): 185-194. [24] Chalmers B J, Spooner E, Abdel-Hamid R H. Single-phase traction drive with solid-rotor induction motor and synchronous phase convertor[J]. IEE Proceedings B-Electric Power Applications, 1981, 128(6): 285-292. [25] Penman J, Chalmers B J, Kamar A M A, et al. The performance of solid steel secondary linear induction machines[J]. IEEE Transactions on Power Apparatus and Systems, 1981, PAS-100(6): 2927-2935. [26] Penman J, Chalmers B J, Kamar A M A, et al. The performance of solid steel secondary linear induction machines[J]. IEEE Power Engineering Review, 1981, PER-1(6): 57. [27] O'Kelly D.Theory and performance of solid-rotor induction and hysteresis machines[J]. Proceedings of the Institution of Electrical Engineers, 1976, 123(5): 421-428. [28] Papini L, Gerada C, Gerada D, et al.High speed solid rotor induction machine: analysis and performances[C]// 2014 17th International Conference on Electrical Machines and Systems, Hangzhou, 2014: 2759-2765. [29] 童钟良. 实心转子感应电机的两层传输线比拟分析[J]. 电工技术学报, 1995, 10(1): 28-33. Tong Zhongliang.Two-region analysis based on a transmission-line analogy in solid rotor induction machines[J]. Transactions of China Electrotechnical Society, 1995, 10(1): 28-33. [30] 郭立炜. 实心转子感应电机的运算电抗及激磁电抗[J]. 河北机电学院学报, 1991, 8(4): 18-24. Guo Liwei.Operational impedance and magnetizing impedance of induction machine with solid rotor[J]. Journal of Hebei Institute of Mechano-Electric Engineering, 1991, 8(4): 18-24. [31] 童钟良. 双层实心转子感应电机的分层阻抗理论[J]. 电工技术学报, 1993, 8(2): 18-22. Tong Zhongliang.The sublayer impedance theroy for analysing double-layer solid rotor induction machines[J]. Transactions of China Electrotechnical Society, 1993, 8(2): 18-22. [32] 童钟良. 有限长双层实心转子电机的转子归算阻抗和端部系数[J]. 电工技术学报, 1998, 13(2): 24-28. Tong Zhongliang.Referred rotor impedance and end coefficient for double-layer solid rotor induction machine with finite length[J]. Transactions of China Electrotechnical Society, 1998, 13(2): 24-28. [33] 张明玉, 潘绵英, 夏东伟, 等. 具有环形槽的复合转子异步电机的电磁场分析与端部系数计算[J]. 中国电机工程学报, 1995, 15(4): 239-246. Zhang Mingyu, Pan Mianying, Xia Dongwei, et al.Elcetromagnetic field analysis calculation and end coeffieient of induction motor with ring slotted composite rotor[J]. Proceedings of the CSEE, 1995, 15(4): 239-246. [34] 张明玉, 唐孝镐, 林金铭. 复合转子异步电机磁场的三维分析及参数计算[J]. 华中理工大学学报: 自然科学版, 1993, 21(2): 14-21. Zhang Mingyu, Tang Xiaohao, Lin Jinming.A 3-D field analysis and parameter computation for a composite-rotor induction motor[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 1993, 21(2): 14-21. [35] 张明玉, 唐孝镐, 林金铭. 复合转子异步电机的实用计算[J]. 电气应用, 1994(2): 14-17. [36] 张明玉, 夏东伟, 王冬青. 复合转子异步电机中磁场的分布特征[J]. 青岛大学学报(工程技术版), 1995, 10(4): 1-9. Zhang Mingyu, Xia Dongwei, Wang Dongqing.Distribution on the magnetic field of a composite-rotor induction motor[J]. Journal of Qingdao University (Engineering & Technology Edition), 1995, 10(4): 1-9. [37] 张明玉, 唐孝镐, 林金铭. 国内外新型派生实心转子异步电动机的发展与展望[J]. 电气应用, 1991(3): 13-15. [38] 傅丰礼. 实心转子异步电动机的等值电路计算[J]. 中小型电机, 1987(5): 6-10. [39] 傅丰礼. 实心转子异步电动机的三维电磁场研究和参数计算[J]. 华中工学院学报, 1987, 15(5): 39-47. Fu Fengli.3D Electromagnetic field and rotor parameters calculation for solid-rotor inductoin motor[J]. Journal Huazhong Central China University of Science and Tedimelogy, 1987, 15(5): 39-47. [40] 唐孝镐, 刘少克. 应用多层理论分析实心转子异步电机[J]. 微特电机, 1990(4): 10-12. [41] 黄子果, 王善铭, 倪守辉. 开槽实心转子电机的等效电路参数计算与性能分析[J]. 电工技术学报, 2016, 31(23): 15-21. Huang Ziguo, Wang Shanming, Ni Shouhui.Parameter calculation and performance analysis of solid rotor induction machines using 3D subsectional and multi-layer method[J]. Transactions of China Electrotechnical Society, 2016, 31(23): 15-21. [42] 黄子果, 王善铭, 倪守辉. 光滑实心转子异步电机等效电路参数的二维计算方法[J]. 中国电机工程学报, 2016, 36(9): 2505-2512. Huang Ziguo, Wang Shanming, Ni Shouhui.2D calculation methods of equivalent-circuit parameters in smooth solid rotor induction machines[J]. Proceedings of the CSEE, 2016, 36(9): 2505-2512. [43] 黄子果, 王善铭, 孙宇光, 等. 开槽实心转子电机的等效电路参数计算与性能分析[J]. 中国电机工程学报, 2017, 37(4): 1208-1215. Huang Ziguo, Wang Shanming, Sun Yuguang.Performance calculation for a canned solid-rotor induction motor with squirrel-cage[J]. Proceedings of the CSEE, 2017, 37(4): 1208-1215. [44] Salon S J.Finite element analysis of electrical machines[M]. Norwell: KLUWER, 1995. [45] Ergene L T, Salon S J.One-slot AC steady-state model of a canned-solid rotor induction motor[J]. IEEE Transactions on Magnetics, 2004, 40(4): 1892-1896. [46] Yang Rui, Zhou Libing, Wang Jin, et al.Performance calculation for a canned solid-rotor induction motor with squirrel-cage[C]//20th International Conference on Electrical Machines and Systems, Sydney, Australia, 2007: 1-5. [47] Gessese Y, Binder A.Axially slitted, high-speed solid-rotor induction motor technology with copper end-rings[C]//International Conference on Electrical Machines and Systems, Tokyo, Japan, 2009: 1-6. [48] Jagiela M, Garbiec T.Evaluation of rotor-end factors in solid-rotor induction motors[J]. IEEE Transactions on Magnetics, 2012, 48(1): 137-142. [49] Garbiec T.Fast computation of performance characteristics for solid-rotor induction motors with electrically inhomogeneous rotors[J]. IEEE Transactions on Energy Conversion, 2016, 31(4): 1688-1696. [50] Aho T, Sihvo V, Nerg J, et al.Rotor materials for medium-speed solid-rotor induction motors[C]//IEEE International Electric Machines & Drives Conference, Antalya, Turkey, 2007, 1: 525-530. [51] 刘长红, 姚若萍. 基于场路结合的实心转子异步电机转子参数计算[J]. 上海交通大学学报, 2003, 37(9): 1372-1374. Liu Zhanghong, Yao Ruoping.A coupled field-cricuit approach to the calculation for parameters of solid rotor induction machine[J]. Journal of Shanghai Jiaotong University, 2003, 37(9): 1372-1374. [52] Ling Zaixun, Zhou Libing, Guo Siyuan, et al.Equivalent circuit parameters calculation of induction motor by finite element analysis[J]. IEEE Transactions on Magnetics, 2014, 50(2): 833-836. [53] Oguz A H, Gülbahce M O, Kocabas D A.Design and optimization of an axially-slitted high-speed solid rotor induction motor[C]//2015 9th International Conference on Electrical and Electronics Engineering, Bursa, Turkey, 2015: 568-573. [54] Gessese Y, Binder A, Funieru B.Analysis of the effect of radial rotor surface grooves on rotor losses of high speed solid rotor induction motor[C]//2010 International Symposium on Power Electronics Electrical Drives Automation and Motion, Pisa, Italy, 2010: 1762-1767. [55] Wang Shanming, Huang Ziguo, Sun Yuguang.Rotor end factors for 2-D FEA of induction motors with smooth or slitted solid rotor[J]. CES Transactions on Electrical Machines and Systems, 2017, 1(2): 132-139. [56] Mirzayee M, Mirsalim M, Gholizad H.Combined 3D numerical and analytical computation approach for analysis and design of high speed solid iron rotor induction machines[C]//2006 6th International Conference on Computational Electromagnetics, Aachen, Germany, 2006: 1-2. [57] 梁艳萍, 张建涛, 索文旭, 等. 双屏蔽复合转子电机涡流损耗分析[J], 中国电机工程学报, 2009, 29(24): 78-84. Liang Yanping, Zhang Jiantao, Suo Wenxu, et al.Eddy current losses analysis of double-cans composite-rotor motor[J]. Proceedings of the CSEE, 2009, 29(24): 78-84. [58] 于雅莉, 张国胜, 吴迪. 低噪声屏蔽电机定子屏蔽套激振力和受迫振动分析[J], 电工技术学报, 2017, 32(增刊1): 160-168. Yu Yali, Zhang Guosheng, Wu Di.The exciting force and forced vibration analysis of the stator can for low noise canned motor[J]. Transactions of China Electrotechnical Society, 2017, 32(1): 160-168. [59] 杨通. 笼型实心转子屏蔽电机电磁场有限元分析与计算[D]. 武汉: 华中科技大学, 2006. [60] 杨通, 周理兵, 蒋炜. 实心笼型异步电机转子涡流分析与计算[J]. 电机与控制应用, 2006, 33(4): 3-6. Yang Tong, Zhou Libing, Jiang Wei.Analysis and calculation of eddy current in induction motor with solid and cage rotor[J]. Electric Machines & Control Application, 2006, 33(4): 3-6. [61] 赵博. 实心转子屏蔽电机电磁参数计算与性能分析[D]. 哈尔滨: 哈尔滨理工大学, 2008. [62] 蒋炜. 变频调速屏蔽电机分析及其控制系统的设计[D]. 武汉: 华中科技大学, 2006. [63] 凌在汛, 周理兵, 张毅, 等. 屏蔽感应电机等效电路参数的有限元计算法[J]. 电工技术学报, 2016, 31(22): 28-34. Ling Zaixun, Zhou Libing, Zhang Yi, et al.Parameters calculation of canned solid-rotor induction motor by finite element analysis[J]. Transactions of China Electrotechnical Society, 2016, 31(22): 28-34.
2018, Vol. 33 
