A PWM Modulation Method to Decrease Noise of Brushless DC Motors
Chen Jian1, Yu Shenbo2
1.National Engineering Research Center for REPM Electrical Machines Shenyang University of Technology Shenyang 110870 China 2.School of Mechanical Engineering Shenyang University of Technology Shenyang 110870 China
Abstract:In the paper, the three-phase corporative modulation method is proposed for suppressing brushless DC motors commutation torque ripple and electromagnetic noise.In this method, there are three types of modulation.The duty cycle expressions of the off-going phase, the on-going phase, and the non-commutation phase are calculated.The finite element method is adopted to analyze transient acoustic field of one 5.5 kW.The proposed method is illustrated to be suitable to suppress electromagnetic noise.The torque ripple and electromagnetic noise with different PWM modulation method for the 5.5 kW prototype motor is built for test.The validity of the proposed method is confirmed by both simulation and experimental results.
陈健, 于慎波. 一种减小无刷直流电动机噪声的PWM调制方法[J]. 电工技术学报, 2016, 31(9): 129-136.
Chen Jian, Yu Shenbo. A PWM Modulation Method to Decrease Noise of Brushless DC Motors. Transactions of China Electrotechnical Society, 2016, 31(9): 129-136.
[1] Takashi K,Shigenobu N.Brushless motors:advanced theory and modern applications[M].Tokyo,Japan:Sogo Electronics Press,2003,1-20. [2] 张冉,王秀和,乔东伟,等.极弧系数选择对永磁无刷直流电机激振力波的影响[J].中国电机工程学报,2010,30(21):79-85. Zhang Ran,Wang Xiuhe,Qiao Dongwei,et al.Influence of pole-arc coefficient on exciting force waves of permanent magnet brushless DC motors[J].Proceedings of the CSEE,2010,30(21):79-85. [3] Abbaszadeh K,Rezaee A F,Teshnehlab M.Slot opening optimization of surface mounted permanent magnet motor for cogging torque reduction[J].Energy Conversion and Management,2012,55(10):108-115. [4] 王晓远,贾旭.基于槽口优化的电动汽车用大功率无刷直流电机齿槽转矩削弱方法[J].电工技术学报,2013,28(6):40-45. Wang Xiaoyuan,Jia Xu.Optimization for the Slot opening to reduce cogging torque in high-power BLDC in electric vehicles[J].Transactions of China Electro-technical Society,2013,28(6):40-45. [5] Abbaszadeh K,Jafari M.Optimizing cogging torque reduction in slot opening shift method for BLDC motor by RSM[C]//2011 2nd Power Electronics,Drive Systems and Technologies Conference,Tehran,2011:62-66. [6] 程树康,葛新,高宏伟,等.分数槽无刷直流电动机齿槽定位力矩的研究[J].中国电机工程学报,2008,28(21):107-111. Cheng Shukang,Ge Xin,Gao Hongwei,et al.Research of cogging torque in the brushless DC motor with fractional ratio of slots and poles[J].Proceedings of the CSEE,2008,28(21):107-111. [7] Hwang K Y,Lin H,Rhyu S H,et al.A study on the novel coefficient modeling for a skewed permanent magnet and overhang structure for optimal design of brushless DC motor[J].IEEE Transactions on Magnetics,2012,48(5):1918-1923. [8] Wang D H,Wang X H,Qiao D W,et al.Reducing cogging torque in surface-mounted permanent-magnet motors by nonuniformly distributed teeth method[J].IEEE Transactions on Magnetics,2011,47(9):2231-2239. [9] 杨玉波,王秀和,朱常青.基于分块永磁磁极的永磁电机齿槽转矩削弱方法[J].电工技术学报,2012,27(3):73-78. Yang Yubo,Wang Xiuhe,Zhu Changqing.Effect of permanent magnet segmentation on the cogging torque of surface mounted permanent magnet motors[J].Transactions of China Electrotechnical Society,2012,27(3):73-78. [10]张勇,程小华.无刷直流电机转矩脉动抑制措施研究[J].微电机,2013,46(7):88-91. Zhang Yong,Cheng Xiaohua.Research on torque ripple suppression measures of BLDC motors[J].Micromotors,2013,46(7):88-91. [11]Lin Y K,Lai Y S.Pulse-width modulation technique for BLDCM drives to reduce commutation torque ripple without calculation of commutation time[J].IEEE Transactions on Industry Applications,2011,47(4):1786-1793. [12]石坚,李铁才.无刷直流电动机低转矩脉动超前换相控制方法[J].中国电机工程学报,2012,32(30):112-117. Shi Jian,Li Tiecai.An advance commutation control method for low torque ripple of brushless DC motors[J].Proceedings of the CSEE,2012,32(30):112-117. [13]王大方,卜德明,朱成,等.一种减小无刷直流电机换相转矩脉动的调制方法[J].电工技术学报,2014,29(5):160-166. Wang Dafang,Bu Deming,Zhu Cheng,et al.A modulation method to decrease commutation torque ripple of brushless DC motors[J].Transactions of China Electrotechnical Society,2014,29(5):160-166. [14]石坚,李铁才.一种消除无刷直流电动机换相转矩脉动的PWM调制策略[J].中国电机工程学报,2012,32(24):110-116. Shi Jian,Li Tiecai.A PWM strategy to eliminate commutation torque ripple of brushless DC motors[J].Proceedings of the CSEE,2012,32(24):110-116. [15]Gao Jin,Hu Yuwen.Direct self-control for BLDC motor drives based on three-dimensional coordinate system[J].IEEE Transactions on Industrial Electronics,2010,57(8):2836-2844. [16]安群涛,孙立志,刘超,等.无刷直流电机的磁链自控直接转矩控制[J].中国电机工程学报,2010,30(12):86-92. An Quntao,Sun Lizhi,Liu Chao,et al.Flux linkage self-control based direct torque control of brushless DC motor[J].Proceedings of the CSEE,2010,30(12):86-92.