基于单端电气量的不对称参数同塔四回线选相方法

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (502 KB)
输出: BibTeX | EndNote (RIS)

摘要不对称参数的同塔四回线具有不同的自感参数,无法使用传统的12序分量法进行解耦,因此采用相线解耦法对其进行解耦,并将相电流分解为12个独立的序电流分量,解决了同塔四回线中的互感耦合问题。线路发生故障时,利用故障边界条件得到序分量之间的关系。在不同回线上发生故障时,穿越序分量与环流序分量的序电流相位分别呈现出同相或反相的特征;同一回线发生不同类型故障时,序分量电流之间满足固定的幅值关系;同一类型的不同相序故障时,序分量相位差满足特定关系。考虑故障点分布系数对保护测量装置的影响,提出适于不对称参数同塔四回线发生单回线故障时的故障识别方法,并构造了相应的选相判据,给出了选相流程和方法。PSCAD/EMTDC仿真结果表明,此选相方法具有良好的选择性,不受故障类型,故障点的位置以及过渡电阻的影响。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘琦
	邰能灵
	范春菊
	于仲安
	尚24-2014-0052/img_1.png12.611.9

关键词 ：不对称参数, 同塔四回线, 选线, 选相, 序分量, 单端电气量

Abstract：The asymmetrical quadruple-circuit lines have different self-inductances, which cannot be decoupled by the twelve-sequence-component method. Phase-Line decouple method is adopted to eliminate the mutual inductance, and convert the original phase currents into 12 different independent current components. When a line fault occurs, the boundary conditions help to find out the relationship between the current components. If a fault occurs on different lines, the across components and loop components are in the same or inverse phase. The amplitudes of the components are the same while the phases are shifted a special angle during the same kind of fault on the different phase of same line. Considering the influence of the distributed factors, a fault phase selection method for asymmetrical quadruple-circuit lines is presented, flow chart for fault phase is also provided. The PSCAD/EMTDC simulation results show that this method is suitable for fault phase selection, and the fault location and fault resistance has little influence on this method.

Key words： Asymmetrical parameter quadruple line on the same tower line selection phase selection sequence component single terminal electric quantities

出版日期: 2016-03-03

PACS:

TM773

作者简介: 邰能灵男,1972年生,教授,博士生导师,主要从事电力系统保护与控制及电力市场方向的教学与研究。E-mail: nltai@sjtu.edu.cn

引用本文:

刘琦, 邰能灵, 范春菊, 于仲安, 尚24-2014-0052/img_1.png12.611.9. 基于单端电气量的不对称参数同塔四回线选相方法[J]. 电工技术学报, 2016, 31(4): 178-186. Liu Qi, Tai Nengling, Fan Chunju, Yu Zhongan, Shang Jin. Fault Phase Selection Scheme for Quadruple-Circuit Transmission Lines with Asymmetrical Parameter Based on Single-Ended Electrical Quantities. Transactions of China Electrotechnical Society, 2016, 31(4): 178-186.

链接本文:

https://dgjsxb.ces-transaction.com/CN/Y2016/V31/I4/178

[1] 田羽, 范春菊, 龚振东. 同杆四回线十二序分量法研究[J]. 电力系统自动化, 2007, 31(21): 35-39, 105.
Tian Yu, Fan Chunju, Gong Zhendong. Twelve sequence component method of four-parallel lines on same towers[J]. Automation of Electric Power Systems, 2007, 31(21): 35-39, 105.
[2] 李伟, 毕天姝, 杨奇逊. 基于相关分析的同杆双回线突变量选相新方法[J]. 电力系统自动化, 2011, 35(8): 58-62.
Li Wei, Bi Tianshu, Yang Qixun. Fault phase sele- ction with fault component in same-tower double- circuit lines based on correlation analysis[J]. Auto- mation of Electric Power Systems, 2011, 35(8): 58-62.
[3] 田羽, 范春菊, 龚震东. 带同杆双回线的T型线路故障分支判定算法[J]. 电力系统自动化, 2006, 30(21): 71-76.
Tian Yu, Fan Chunju, Gong Zhendong. Faulted line selecting method of T circuit of parallel transmission lines[J]. Automation of Electric Power Systems, 2006, 30(21): 71-76.
[4] 陈福锋, 钱国明. 基于同杆双回线跨线故障识别的选相方案[J]. 电力系统自动化, 2008, 32(6): 66-70.
Chen Fufeng, Qian Guoming. Research on fault phase selector of protective relay for double circuit lines based on crossing-line fault identifying[J]. Automation of Electric Power Systems, 2008, 32(6): 66-70.
[5] 葛耀中. 新型继电保护与故障测距原理与技术[M]. 西安: 西安交通大学出版社, 1996.
[6] 张海, 黄少锋. 利用电压辅助电流选相的同杆双回线单端电气量选相原理[J]. 中国电机工程学报, 2013, 33(7): 139-148.
Zhang Hai, Huang Shaofeng. A fault phase selection scheme of currents with assistant voltages for common- tower double-circuit transmission lines using one- terminal electrical quantities [J]. Proceedings of the CSEE, 2013, 33(7): 139-148.
[7] 王安宁, 陈青, 周占平, 等. 改进的相分量法求解同杆双回线故障新算法[J]. 电力系统自动化, 2009, 33(13): 58-62.
Wang Anning, Chen Qing, Zhou Zhanping, et al. An improved phase component method for calculating faults on the double-circuit transmission lines on same tower[J]. Automation of Electric Power Systems, 2009, 33(13): 58-62.
[8] 田羽, 范春菊, 龚震东. 同杆4回线12序分量法[J]. 电力系统自动化, 2007, 31(21): 35-39.
Tian Yu, Fan Chunju, Gong Zhendong. Twelve sequence component method of four-parallel lines on same towers[J]. Automation of Electric Power System, 2007, 31(21): 35-39.
[9] Fan Chunju, Liu Ling, Tian Yu. A fault-location method for 12-phase transmission lines based on twelve-sequence-component method[J]. IEEE Trans- actions on Power Delivery, 2011, 26(1):135-142.
[10] 张琦兵, 邰能灵, 袁成, 等. 同塔四回输电线的相模变换[J]. 中国电机工程学报, 2009, 29(34): 57-62.
Zhang Qibing, Tai Nengling, Yuan Cheng, et al. Phase- mode of four-parallel lines on the same tower[J]. Proceedings of the CSEE, 2009, 29(34): 57-62.
[11] 邓孟华, 范春菊, 舒巧俊, 等. 同杆4回线故障选线方法[J]. 电力系统自动化, 2008, 32(15): 57-60.
Deng Menghua, Fan Chunju, Shu Qiaojun, et al. Method for fault line selection of four jointed parallel lines on the same tower[J]. Automation of Electric Power Systems, 2008, 32(15): 57-60.
[12] 邓孟华, 范春菊, 宗明, 等. 基于环流分量的同杆四回线选相方法[J]. 电力系统保护与控制, 2012, 40(1): 138-144.
Deng Menghua, Fan Chunju, Zong Ming, et al. New faulted phase selecting method for four transmission lines on the same tower based on loop flow component[J]. Power System Protection and Control, 2012, 40(1): 138-144.
[13] 徐鹏, 王钢, 李海峰, 等. 基于环流量的同杆四回输电线路故障选线[J]. 电力系统保护与控制, 2011, 38(19): 78-83.
Xu Peng, Wang Gang, Li Haifeng, et al. Fault line selection for four-parallel lines on same tower based on circulation currents[J]. Power System Protection and Control, 2011, 38(19): 78-83.
[14] 龚震东, 范春菊, 田羽. 一种适合于同杆4 回线的故障测距方法[J]. 电力系统自动化, 2007, 31(23): 70-73.
Gong Zhendong, Fan Chunju, Tian Yu. A fault location algorithm suitable for jointed four trans- mission lines[J]. Automation of Electric Power Systems, 2007, 31(23): 70-73.
[15] 任明珠, 吴文宣, 陈金祥, 等. 基于负序电流的同塔多回线故障测距方法[J]. 电力系统及其自动化学报, 2010, 22(1): 71-75.
Ren Mingzhu, Wu Wenxuan, Chen Jinxiang, et al. New fault location algorithm for muti-loop trans- mission lines based on negative-sequence current[J]. Proceedings of the CSU-EPSA, 2010, 22(1): 71-75.
[16] 舒巧俊, 陈松石, 范春菊, 等. 非全程同杆四回线故障选线新方法[J]. 电力系统保护与控制, 2010, 38(19): 131-136.
Shu Qiaojun, Chen Songshi, Fan Chunju, et al. A new method of fault line selection for incomplete-journey four-jointed parallel line on the same tower[J]. Power System Protection and Control, 2010, 38(19): 131-136.
[17] 李博通, 李永丽, 陈莉, 等. 同塔四回线参数解耦及故障分析方法[J]. 电力系统保护与控制, 2010, 38(19): 2-9.
Li Botong, Li Yongli, Chen Li, et al. Method for parameter decoupling and fault analysis of four- circuit transmission lines on the same tower[J]. Power System Protection and Control, 2010, 38(19): 2-9.
[18] 宋国兵, 李森. 一种新相模变换矩阵[J]. 电力系统自动化, 2007, 31(14): 57-60.
Song Guobing, Li Sen. A novel phase-mode trans- formation matrix[J]. Automation of Electric Power System, 2007, 31(14): 57-60.