Abstract:In order to improve the accuracy and reliability of single-phase grounding fault feeder selection in distribution network, a fault line selection method based on traveling wave panoramic waveform in time-frequency domain is proposed. First, the S-transform is used to extract the time-frequency traveling wave panoramic waveform of each line, which can display truly the characteristics of the fault traveling. The difference of amplitude, frequency and polarity of traveling wave between faulty line and healthy line is analyzed in detail. Then, based on the principle of waveform similarity, the traveling wave panoramic waveform of faulty line and healthy lines are analyzed quantitatively, and a similarity degree coefficient matrix is constructed for each line. By calculating the sum of the correlation coefficients of each line, the difference of the panoramic waveform is amplified, and the accurate distribution network line selection is realized. The proposed faulty line selection method does not need to set the threshold manually. A large number of simulation results show that the method has high algorithm adaptability. Under 3kΩ high-resistance ground fault, it can still achieve sensitively faulty feeder selection in distribution network.
邓丰, 梅龙军, 唐欣, 徐帆, 曾祥君. 基于时频域行波全景波形的配电网故障选线方法[J]. 电工技术学报, 2021, 36(13): 2861-2870.
Deng Feng, Mei Longjun, Tang Xin, Xu Fan, Zeng Xiangjun. Faulty Line Selection Method of Distribution Network Based on Time-Frequency Traveling Wave Panoramic Waveform. Transactions of China Electrotechnical Society, 2021, 36(13): 2861-2870.
[1] 郭凤仪, 高洪鑫, 唐爱霞, 等. 局部二值模式直方图匹配的串联故障电弧检测及选线[J]. 电工技术学报, 2020, 35(8): 1653-1661. Guo Fengyi, Gao Hongxin, Tang Aixia, et al.Series arc fault detection and line selection based on local binary pattern histogram matching[J]. Transactions of China Electrotechnical Society, 2020, 35(8): 1653-1661. [2] 邓丰, 李鹏, 曾祥君, 等. 基于D-PMU的配电网故障选线和定位方法[J]. 电力系统自动化, 2020, 44(19): 160-171. Deng Feng, Li Peng, Zeng Xiangjun, et al.Fault line selection and location method based on synchrophasor measurement unit for distribution network[J]. Automation of Electric Power Systems, 2020, 44(19): 160-171. [3] Wang Yuanyuan, Huang Yuhao, Zeng Xiangjun.Faulty feeder detection of single phase-earth fault using grey relation degree in resonant grounding system[J]. IEEE Transactions on Power Delivery, 2017, 32(1): 55-61. [4] 梁睿, 王崇林. 零序暂态电流灰色关联分析的小电流接地选线[J]. 中南大学学报, 2010, 41(2): 585-591. Liang Rui, Wang Chonglin.Fault line selection for single-phase-to-earth faults based on zero sequence transient current and grey relation analysis[J]. Journal of Central South University, 2010, 41(2): 585-591. [5] 龙毅, 欧阳金鑫, 熊小伏, 等. 基于零序功率变化量的配电网单相高阻接地保护[J]. 电工技术学报, 2019, 34(17): 3687-3695. Long Yi, Ouyang Jinxin, Xiong Xiaofu, et al.Protection principle of single-phase high resistance fault for distribution network base on zero-sequence power variation[J]. Transactions of China Electrote-chnical Society, 2019, 34(17): 3687-3695. [6] 汤涛, 黄纯, 江亚群, 等. 基于馈线零序阻抗特性的谐振接地故障选线方法[J]. 电工技术学报, 2016, 31(20): 192-201. Tang Tao, Huang Chun, Jiang Yaqun, et al.A method of fault line selection in resonant earthed system based on zero sequence impedance characteristic of lines[J]. Transactions of China Electrotechnical Society, 2016, 31(20): 192-201. [7] 束洪春, 龚振, 田鑫萃, 等. 基于故障特征频带及形态谱的单相接地故障选线[J]. 电网技术, 2019, 43(3): 1041-1053. Shu Hongchun, Gong Zhen, Tian Xincui, et al.Single line-to-ground fault line selection based on fault characteristic frequency band and morphological spectrum[J]. Power System Technology, 2019, 43(3): 1041-1053. [8] 刘谋海, 王媛媛, 曾祥君, 等. 基于暂态相电流特征分析的故障选线新方法[J]. 电力系统及其自动化学报, 2017, 29(1): 30-36. Liu Mouhai, Wang Yuanyuan, Zeng Xiangjun, et al.Novel method of fault line selection based on characteristic analysis of transient phase-current[J]. Proceedings of the CSU-EPSA, 2017, 29(1): 30-36. [9] 吴乐鹏, 黄纯, 林达斌, 等. 基于暂态小波能量的小电流接地故障选线新方法[J]. 电力自动化设备, 2013, 33(5): 70-75. Wu Lepeng, Huang Chun, Lin Dabin, et al.Faulty line selection based on transient wavelet energy for non-solid-earthed network[J]. Electric Power Automation Equipment, 2013, 33(5): 70-75. [10] 梁睿, 崔连华, 都志立, 等. 基于广域行波初始波头时差关系矩阵的配电网故障选线及测距[J]. 高电压技术, 2014, 40(11): 3411-3417. Liang Rui, Cui Lianhua, Du Zhili, et al.Fault line selection and location in distribution power network based on traveling wave time differece of arrival relationships[J]. High Voltage Egineering, 2014, 40(11): 3411-3417. [11] 邓丰, 李欣然, 曾祥君. 基于全波形信息的混联线路单端行波定位方法[J]. 电工技术学报, 2018, 33(15): 3471-3485. Deng Feng, Li Xinran, Zeng Xiangjun.A single-ended traveling wave location method for hybrid transmission lines based on full waveform information[J]. Transactions of China Electrotechnical Society, 2018, 33(15): 3471-3485. [12] 张帆, 潘贞存, 张慧芬, 等. 基于方向行波的小电流接地系统故障选线[J]. 中国电机工程学报, 2007, 27(34): 70-75. Zhang Fan, Pan Zhencun, Zhang Huifen, et al.Fault line selection in non-solidly earthed network based on direction traveling wave[J]. Proceedings of the CSEE, 2005, 27(34): 70-75. [13] 王珺, 董新洲, 施慎行. 考虑参数依频变化特性的辐射状架空配电线路行波传播研究[J]. 中国电机工程学报, 2013, 33(22): 96-102, 16. Wang Jun, Dong Xinzhou, Shi Shenxing.Traveling wave transmission research for overhead lines of radial distribution power systems considering frequency characteristics[J]. Proceedings of the CSEE, 2013, 33(22): 96-102, 16. [14] 姜博, 董新洲, 施慎行. 基于单相电流行波的配电线路单相接地故障选线方法[J]. 中国电机工程学报, 2014, 34(34): 6216-6227. Jiang Bo, Dong Xinzhou, Shi Shenxing.A method of single phase to ground fault feeder selection based on single phase current travelling wave for distribution lines[J]. Proceedings of the CSEE, 2014, 34(34): 6216-6227. [15] 邓丰, 李欣然, 曾祥君, 等. 基于多端故障行波时差的含分布式电源配电网故障定位新方法[J]. 中国电机工程学报, 2018, 38(15): 4399-4409, 4640. Deng Feng, Li Xinran, Zeng Xiangjun, et al.A novel multi-terminal fault location method based on traveling wave time difference for radial distribution systems with distributed generators[J]. Proceedings of the CSEE, 2018, 38(15): 4399-4409, 4640 . [16] 陈立军. 10kV配电网单相接地电容电流的工程计算法探讨[J]. 继电器, 2006(15): 83-85. Chen Lijun.Discussion on the engineering calculation method of single-phase grounding capacitance current in 10kV distribution network[J]. Relay, 2006 (15): 83-85. [17] 葛耀中. 新型继电保护和故障测距的原理与技术[M]. 2版. 西安: 西安交通大学出版社, 2007. [18] 张钧, 何正友, 贾勇. 基于S变换的故障选线新方法[J]. 中国电机工程学报, 2012, 31(10): 109-115. Zhang Jun, He Zhengyou, Jia Yong.Fault line identification approach based on S-transform[J]. Proceedings of the CSEE, 2012, 31(10): 109-115. [19] 李建闽, 林海军, 梁成斌, 等. 基于双分辨率S变换和学习向量量化神经网络的电能质量扰动检测方法[J]. 电工技术学报, 2019, 34(16): 3453-3463. Li Jianmin, Lin Haijun, Liang Chenbin, et al.Detection method of power quality disturbances based on double resolution S transform and learning vector quantization neural network[J]. Transactions of China Electrotechnical Society, 2019, 34(16): 3453-3463. [20] Huda N H T, Abdullah A R, Jopri M H. Power quality signals detection using S-transform[C]//IEEE 7th International Power Engineering and Optimization Conference, Langkawi, Malaysia, 2013: 552-557. [21] 李泽文, 贺子凝, 郭田田, 等. 基于时频矩阵相似度的输电线路暂态保护方法[J]. 电力系统自动化, 2019, 43(5): 121-134. Li Zewen, He Zining, Guo Tiantian, et al.Transient protection method for transmission lines based on similarity of time-frequency matrix[J]. Automation of Electric Power Systems, 2019, 43(5): 121-134. [22] 郭谋发, 刘世丹, 杨耿杰. 利用时频谱相似度识别的配电线路接地选线方法[J]. 中国电机工程学报, 2013, 33(19): 183-191. Guo Moufa, Liu Shidan, Yang Gengjie.A novel approach to detect fault lines in distribution network using similarity recognition based on time-frequency spectrum[J]. Proceedings of the CSEE, 2013, 33(19): 183-191.