Vector Control of Nest-Loop Secondary Linear Doubly-Fed Machine Considering Static End Effect Adapted to Urban Transit
Ge Jian1, Bao Zhen1, Xu Wei2, Tang Yirong1, Liao Kaiju2
1. State Key Laboratory of Advanced Electromagnetic Technology Huazhong University of Science and Technology Wuhan 430074 China; 2. Key Laboratory of High Density Electromagnetic Power and Systems Institute of Electrical Engineering Chinese Academy of Sciences Beijing 100190 China
Abstract：Compared with the rotating machine, the linear machine has the advantages of strong climbing ability, small turning radius, low noise, light vehicle weight, and low overall energy consumption, which is especially suitable for urban rail transit drive systems. The nest-loop secondary linear doubly-fed machine (NLS-LDFM) is a new linear machine evolved from the nest-loop rotor brushless doubly-fed machine (BDFM), with a simple structure and easy operation and maintenance. It can overcome the significant thrust and power factor decrease under high speed and large slip. However, traditional control methods for BDFM are unsuitable because of the static end effect and the DC grid supply. Due to the cut-open primary iron core, the static end effect in NLS-LDFM generates the pulsating magnetic field evenly distributed along the motion direction, leading to two sets of asymmetrical three-phase windings and direct coupling. The large harmonic current, including negative sequence current and direct-coupling current, is produced. Furthermore, since the power supply of NLS-LDFM is different from that of BDFM, it is necessary to realize the close loop doubly-fed mode operation in urban transit power supply. Thus, a power winding voltage-oriented vector control strategy with static end effect compensation is proposed. Firstly, the basic structure and operation principle of NLS-LDFM, similar to the BDFM, is introduced. The static end effect and its compensation principle are analyzed. Then, the mathematical model of the three-phase static coordinate system and simplified two-phase rotating coordinate system are established. Secondly, the mathematical relationship of the primary current under the voltage orientation of the power winding is derived, and the decoupling control of two sets of winding in the electromagnetic thrust equation is realized. The power winding and control winding side converter control methods are presented. The constant voltage and frequency ratio control is employed in power winding, and the double close loop control of speed and current is applied in control winding. Simulations and experiments have demonstrated that the new method can effectively improve the steady-state drive performance of the NLS-LDFM through vector control with static end effect compensation. With the power winding voltage-oriented vector control, the electromagnetic thrust and speed can be controlled conveniently by adjusting the d-axis current of the control winding. With the static end effect compensation, the three-phase current of two winding sets is symmetrical, effectively suppressing the negative sequence current. The fast Fourier transform results show that the direct-coupling current is also suppressed. Furthermore, the noise and vibration can be decreased, and the efficiency can be improved. The following conclusions can be drawn. (1) The power winding voltage-oriented vector control easily realizes the start process and close loop doubly-fed operation in the DC power supply. The cross-coupling between power winding and control winding can be ignored. The electromagnetic thrust can be controlled directly by adjusting the d-axis current of the control winding. (2) The proposed static end effect compensation method is realized by pulsating voltage feedforward. Compared with the NLS-LDFM without compensation, the harmonic current and thrust ripple are suppressed effectively.
葛健, 包振, 徐伟, 唐一融, 廖凯举. 考虑静态端部效应的城轨交通用同心笼次级直线双馈电机矢量控制[J]. 电工技术学报, 2024, 39(24): 7752-7763.
Ge Jian, Bao Zhen, Xu Wei, Tang Yirong, Liao Kaiju. Vector Control of Nest-Loop Secondary Linear Doubly-Fed Machine Considering Static End Effect Adapted to Urban Transit. Transactions of China Electrotechnical Society, 2024, 39(24): 7752-7763.
[1] 吕刚. 直线电机在轨道交通中的应用与关键技术综述[J]. 中国电机工程学报, 2020, 40(17): 5665-5675. Lü Gang.Review of the application and key technology in the linear motor for the rail transit[J]. Proceedings of the CSEE, 2020, 40(17): 5665-5675. [2] 徐伟, 肖新宇, 董定昊, 等. 直线感应电机效率优化控制技术综述[J]. 电工技术学报, 2021, 36(5): 902-915, 934. Xu Wei, Xiao Xinyu, Dong Dinghao, et al.Review on efficiency optimization control strategies of linear induction machines[J]. Transactions of China Elec-trotechnical Society, 2021, 36(5): 902-915, 934. [3] 沈燚明, 卢琴芬. 初级励磁型永磁直线电机研究现状与展望[J]. 电工技术学报, 2021, 36(11): 2325-2343. Shen Yiming, Lu Qinfen.Overview of permanent magnet linear machines with primary excitation[J]. Transactions of China Electrotechnical Society, 2021, 36(11): 2325-2343. [4] Saifkhani F, Wallace A K.A linear brushless doubly-fed machine drive for traction applications[C]//1993 Fifth European Conference on Power Electronics and Applications, Brighton, UK, 1993: 344-348. [5] Zhong Zaimin, Shao Zhongshu, Yang Minglei, et al.Quasi-synchronous operation principle of a variable air-gap doubly fed linear motor for high-speed maglev application[J]. IEEE Transactions on Transportation Electrification, 2023, 9(2): 2929-2940. [6] Seifkhani F.Investigation, analysis and design of the linear brushless doubly-fed machine[D]. USA: Oregon State University, 1991. [7] Wang Ying, He Hongyun, Lu Weiguo, et al.Calcu-lation and analysis of electromagnetic characteristics of double-fed linear motor[J]. IEEE Access, 2019, 7: 12291-12296. [8] Sarasola I, Poza J, Rodriguez M A, et al.Direct torque control design and experimental evaluation for the brushless doubly fed machine[J]. Energy Conversion and Management, 2011, 52(2): 1226-1234. [9] 张凤阁, 朱连成, 金石, 等. 开绕组无刷双馈风力发电机最大功率点跟踪直接转矩模糊控制研究[J]. 电工技术学报, 2016, 31(15): 43-53. Zhang Fengge, Zhu Liancheng, Jin Shi, et al.Research on the maximum power point tracking of brushless doubly-fed wind power generator with open winding direct torque fuzzy control strategy[J]. Transactions of China Electrotechnical Society, 2016, 31(15): 43-53. [10] Poza J, Oyarbide E, Roye D.New vector control algorithm for brushless doubly-fed machines[C]//IEEE 2002 28th Annual Conference of the Industrial Electronics Society, Seville, Spain, 2002: 1138-1143. [11] 孔铭. 无刷双馈电动机变频调速系统控制方法研究[D]. 武汉: 华中科技大学, 2018. Kong Ming.Research on control methods of variable frequency speed regulation system based on a brushless doubly-fed motor[D]. Wuhan: Huazhong University of Science and Technology, 2018. [12] 王淼, 杨晓峰, 李世翔, 等. 城市轨道交通直流自耦变压器牵引供电系统故障保护研究[J]. 电工技术学报, 2022, 37(4): 976-989. Wang Miao, Yang Xiaofeng, Li Shixiang, et al.Fault protection of DC auto-transformer traction power supply system for urban rail transit[J]. Transactions of China Electrotechnical Society, 2022, 37(4): 976-989. [13] Ge Jian, Xu Wei, Liu Yi, et al.Investigation on winding theory for short primary linear machines[J]. IEEE Transactions on Vehicular Technology, 2021, 70(8): 7400-7412. [14] 葛健. 同心笼次级直线双馈电机端部效应及运行特性分析[D]. 武汉: 华中科技大学, 2019. Ge Jian.End effect and Characteristic analysis for linear doubly fed machine with nested-loop secondary[D]. Wuhan: Huazhong University of Science and Technology, 2019. [15] 包振, 葛健, 徐伟, 等. 同心笼次级直线双馈电机静态端部效应补偿策略[J]. 电工技术学报, 2023, 38(17): 4621-4632. Bao Zhen, Ge Jian, Xu Wei, et al.Compensation strategy for static end effect in nest-loop secondary linear doubly-fed machine[J]. Transactions of China Electrotechnical Society, 2023, 38(17): 4621-4632. [16] Cheng Yuan, Yu Bo, Kan Chaohao, et al.Design and performance study of a brushless doubly fed generator based on differential modulation[J]. IEEE Transa-ctions on Industrial Electronics, 2020, 67(12): 10024-10034. [17] 于克训, 陈曦, 谢贤飞, 等. 无刷双馈电机研究综述与展望[J]. 电工技术学报, 2024, 39(2): 397-422. Yu Kexun, Chen Xi, Xie Xianfei, et al.Overview and prospect of the brushless doubly-fed machine research[J]. Transactions of China Electrotechnical Society, 2024, 39(2): 397-422. [18] 孙兆龙, 马伟明, 鲁军勇, 等. 长初级双边直线感应电动机静态纵向边端效应及阻抗矩阵研究[J]. 中国电机工程学报, 2010, 30(18): 72-77. Sun Zhaolong, Ma Weiming, Lu Junyong, et al.Research of static longitudinal end effect and impedance matrix for long primary double-sided linear induction motors[J]. Proceedings of the CSEE, 2010, 30(18): 72-77. [19] Poza J, Oyarbide E, Roye D, et al.Unified reference frame dq model of the brushless doubly fed machine[J]. IET Electric Power Applications, 2006, 153(5): 726-733. [20] 葛健, 徐伟, 刘毅, 等. 考虑端部效应的同心笼次级直线双馈电机等效电路[J]. 电工技术学报, 2022, 37(19): 4957-4968. Ge Jian, Xu Wei, Liu Yi, et al.Equivalent circuit for nested-loop secondary linear doubly-fed machine considering end effect[J]. Transactions of China Electrotechnical Society, 2022, 37(19): 4957-4968. [21] Huang Renzhi, Quan Xiangjun, Wu Zaijun, et al.A novel reduced-order generalized differentiator with zero-phase lag and improved noise attenuation[J]. IEEE Transactions on Power Electronics, 2023, 38(2): 1406-1411.
2024, Vol. 39 
