电工技术学报  2021, Vol. 36 Issue (12): 2616-2626    DOI: 10.19595/j.cnki.1000-6753.tces.200388
电力电子 |
有源钳位单级隔离型AC-DC功率因数变换器
张志1,2, 孟利伟1,2, 唐校1, 张兆云1, 谢小鲲3
1.东莞理工学院电子工程与智能化学院 东莞 523808;
2.广东工业大学自动化学院 广州 510006;
3.易事特集团股份有限公司 东莞 523808
A Single Stage Isolated AC-DC Power Factor Corrected Converter with Active Clamping
Zhang Zhi1,2, Meng Liwei1,2, Tang Xiao1, Zhang Zhaoyun1, Xie Xiaokun3
1. School of Electrical Engineering and Intelligence Dongguan University of Technology Dongguan 523808 China;
2. School of Automation Guangdong University of Technology Guangzhou 510006 China;
3. East Group Company Limited Dongguan 523808 China
全文: PDF (2599 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 该文提出一种基于有源钳位技术的单级隔离型AC-DC功率因数校正变换器拓扑,该变换器具有升压和功率因数校正功能,且仅通过单级功率变换实现输入和输出电压的隔离。首先,详细分析该拓扑的工作原理;然后,通过合理设计谐振电感和电容参数,并结合有源钳位技术,降低开关管的电压应力,并实现主开关管和辅开关管的零电压开通和二次侧整流二极管零电流关断;最后,详细推导该变换器关键元器件的设计过程,并搭建开关频率为85kHz的基于SiC功率器件3kW实验样机,对所提拓扑工作原理的正确性和可行性进行实验验证。该变换器能工作于较宽的输入电压范围,具有元器件少、控制方法简单、功率因数高和能量转换效率高等优点。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
张志
孟利伟
唐校
张兆云
谢小鲲
关键词 功率因数校正有源钳位谐振型碳化硅    
Abstract:A single-stage AC-DC isolated power factor corrected converter topology with active clamping is proposed in this paper. The converter has the functions of step-up and power factor correction, and only realizes the isolation of input and output voltage through single-stage power conversion. Firstly, the working principle of the topology is analyzed in detail. Then, the voltage spikes of the main and auxiliary switching tubes are reduced based on the active-clamped technology, and the zero-voltage-switch turning-on for main and auxiliary switching tubes as well as zero-current-switch turning-off for output rectifier diodes can be realized through the reasonable design of resonant inductance and capacitance parameters. Finally, the design process for the key components of the converter is derived, and a 3kW experimental prototype based on SiC power device with the switching frequency of 85kHz is built to verify the correctness and feasibility of the proposed topology. The converter can work in a wide range of input voltage and has the advantages of fewer power components, simple control method, high power factor and high energy conversion efficiency.
Key wordsPower factor correction    active clamped    resonant    SiC   
收稿日期: 2020-04-20     
PACS: TM46  
基金资助:广东省自然科学基金项目(2016A030313134)、教育部产学合作协同育人项目(201801283006)和广东省高等教育教学研究与改革项目(PX-3218216)资助
通讯作者: 张 志, 男,1981年生,博士,副教授,硕士生导师,研究方向为并网逆变器装置拓扑及波形控制技术、谐振软开关技术。E-mail: zhangz@dgut.edu.cn   
作者简介: 孟利伟,男,1992年生,硕士研究生,研究方向为电力电子装置谐振软开关技术。E-mail:1445262800@qq.com
引用本文:   
张志, 孟利伟, 唐校, 张兆云, 谢小鲲. 有源钳位单级隔离型AC-DC功率因数变换器[J]. 电工技术学报, 2021, 36(12): 2616-2626. Zhang Zhi, Meng Liwei, Tang Xiao, Zhang Zhaoyun, Xie Xiaokun. A Single Stage Isolated AC-DC Power Factor Corrected Converter with Active Clamping. Transactions of China Electrotechnical Society, 2021, 36(12): 2616-2626.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.200388          https://dgjsxb.ces-transaction.com/CN/Y2021/V36/I12/2616