Analysis of Multi-Field Coupling Strength for MW High-Speed Permanent Magnet Machine
Wang Tianyu1, Wen Fuqiang1, Zhang Fengge2, Wang Dapeng2, Dai Rui2
1. Department of Mechanical Engineering Shenyang Institute of Engineering Shenyang 110136 China; 2. School of Electrical Engineering Shenyang University of Technology Shenyang 110870 China
Abstract:To solve the problem of strength calculation of carbon-fiber retaining rotor for MW high-speed permanent magnet (HSPM) machine,the 3D fluid-thermal-solid coupling for a 1.12 MW, 18 000 r/min HSPM machine was calculated. Firstly, the finite volume method was used to calculate the temperature field and the fluid field of the machine, to achieve rotor temperature field distribution and its transmission. The simulation results were verified by experiments. Then, the thermal stress distribution of the rotor under the service condition was obtained based on the results of the rotor temperature field by exerting the corresponding constraints. The strength variation of the carbon fiber rotor under the multi-field coupling condition is summarized.
[1] 王凤翔. 高速电机的设计特点及相关技术的研究[J]. 沈阳工业大学学报, 2006, 28(3): 258-263.Wang Fengxiang. Study on design feature and related technology of high speed electrical machines[J]. Journal of Shenyang University of Technology, 2006, 28(3): 258-263. [2] 张凤阁, 杜光辉, 王天煜, 等. 高速电机发展综述[J]. 电工技术学报, 2016, 31(7): 1-18.Zhang Fengge, Du Guanghui, Wang Tianyu, et al. Review on development and design of high speed machines[J]. Transactions of China Electrotechnical Society, 2016, 31(7): 1-18. [3] Zwyssic C, Kolar J W, Thaler W, et al.Design of a 100 W, 500000 rpm permanent magnet generator for mesoscale gas turbines[C]//Conference Record of the 2005 Industry Applications Conference, Fourtieth IAS Annual Meeting, Hong Koing, China, 2005: 253-260. [4] 马伟明, 王东, 程思为, 等. 高性能电机系统的共性基础科学问题与技术发展前沿[J]. 中国电机工程学报, 2016, 36(8): 2225-2235.Ma Weiming, Wang Dong, Cheng Siwei, et al. Common basic scientific problems and development of leading-edge technology of high performance motor system[J]. Proceedings of the CSEE, 2016, 36(8): 2225-2235. [5] Schneider T, Binder A.Design and evaluation of a 60000rpm permanent magnel bearingless high speed motor[C]//7th International Conference on Power Electionies and Drive Systems, Bangkad, Thailand, 2007: 1-8. [6] 张凤阁, 杜光辉, 王天煜, 等. 高速永磁电机转子不同保护措施的强度分析[J]. 中国电机工程学报, 2013, 33(z1): 195-202.Zhang Fengge, Du Guanghui, Wang Tianyu, et al. Rotor strength analysis of high-speed permanent magnet under different protection measures[J]. Proceedings of the CSEE, 2013, 33(z1): 195-202. [7] 张宸菥, 陈立芳, 王维民, 等. 高速电动机损耗分析及温度场计算[J]. 电气技术, 2017, 18(5): 44-50.Zhang Chenxi, Chen Lifang, Wang Weimin, et al. High speed motor loss analysis and temperature field calculation[J]. Electrical Engineering, 2017, 18(5): 44-50. [8] 朱高嘉, 朱英浩, 朱建国, 等. 基于有限公式法和流固耦合的永磁牵引电动机冷却系统设计与分析[J]. 电工技术学报, 2017, 32(5): 70-77.Zhu Gaojia, Zhu Yinghao, Zhu Jianguo, et al. Thermal analysis and cooling system design of a permanent magnet traction motor using computational fluid dynamics and cell method[J]. Transactions of China Electrotechnical Society, 2017, 32(5): 70-77. [9] 李伟力, 陈玉红. 大型水轮发电机转子旋转状态下磁极间流体流动与温度场分布[J]. 中国电机工程学报, 2012, 32(9): 132-139.Li Weili, Chen Yuhong. Fluid flow and temperature field analysis between two poles of a large air-cooled hydro-generator rotor in rotation[J]. Proceedings of the CSEE, 2012, 32(9): 132-139. [10] 佟文明, 孙静阳, 吴胜男. 全封闭高速永磁电机转子结构对转子散热的影响[J]. 电工技术学报, 2017, 32(22): 91-100. Tong Wenming, Sun Jingyang, Wu Shengnan. Effect of rotor structure on rotor dissipation for totally enclosed high-speed permanent magnet motor[J]. Transactions of China Electrotechnical Society, 2017, 32(22): 91-100. [11] 王晓远, 高鹏. 等效热网络法和有限元法在轮毂电机温度场计算中的应用[J]. 电工技术学报, 2016, 31(16): 26-33.Wang Xiaoyuan, Gao Peng. Application of equivalent thermal network method and finite element method in temperature calculation of in-wheel motor[J]. Transactions of China Electrotechnical Society, 2016, 31(16): 26-33. [12] 张凤阁, 杜光辉, 王天煜, 等. 1.12MW高速永磁电机多物理场综合设计[J]. 电工技术学报, 2015, 30(12): 171-180.Zhang Fengge, Du Guanghui, Wang Tianyu, et al. Integrated design of 1.12MW high speed PM machine based on multi-physics fields[J]. Transactions of China Electrotechnical Society, 2015, 30(12): 171-180. [13] 张涛, 朱熀秋, 孙晓东, 等. 基于有限元法的高速永磁转子强度分析[J]. 电机与控制学报, 2012, 16(6): 63-68.Zhang Tao, Zhu Huangqiu, Sun Xiaodong, et al. Strength analysis on high-speed permanent magnet rotor using finite element method[J]. Electric Machines and Control, 2102, 16(6): 63-68. [14] 程文杰, 耿海鹏, 冯圣, 等. 高速永磁同步电机转子强度分析[J]. 中国电机工程学报, 2012, 32(27): 87-94.Cheng Wenjie, Geng Haipeng, Feng Sheng, et al. Rotor strength analysis of high-speed permanent magnet synchronous motor[J]. Proceedings of the CSEE, 2012, 32(27): 87-94. [15] 万援, 崔淑梅, 吴绍朋, 等. 扁平大功率高速永磁同步电机的护套设计及其强度优化[J]. 电工技术学报, 2018, 33(1): 55-63.Wan Yuan, Cui Shumei, Wu Shaopeng, et al. Design and strength optimization of the carbon fiber sleeve of high-power high-speed PMSM with flat structure[J]. Transactions of China Electrotechnical Society, 2018, 33(1): 55-63. [16] 陈亮亮, 祝长生, 王萌. 碳纤维护套高速永磁电机热态转子强度[J]. 浙江大学学报(工学版), 2015, 49(1): 162-172.Chen Liangliang, Zhu Changsheng, Wang Meng. Strength for thermal carbon-fiber retaining rotor in high-speed permanent magnet machine[J]. Journal of Zhejiang University (Engineering Science), 2015, 49(1): 162-172. [17] 张超, 朱建国, 韩雪岩. 高速表贴式永磁电机转子强度分析[J]. 中国电机工程学报, 2016, 36(17): 4719-4727.Zhang Chao, Zhu Jianguo, Han Xueyan. Rotor strength analysis of high-speed surface mounted permanent magnet rotors[J]. Proceedings of the CSEE, 2016, 36(17): 4719-4727. [18] 陶文铨. 数值传热学[M]. 西安: 西安交通大学出版社, 2001. [19] Lahne H C, Gerling D, Staton D, et al.Design of a 50000 rpm high-speed high-power six-phase PMSM for use in aircraft applications[C]//2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies, Monte Carlo, Monaco, 2016: 1-11. [20] Zhang Yue, McLoone S, Cao Wenping, et al. Power loss and thermal analysis of a MW high speed permanent magnet synchronous[J]. IEEE Transactions on Energy Conversion, 2017, 32(4): 1468-1478.