电工技术学报  2023, Vol. 38 Issue (18): 5006-5016    DOI: 10.19595/j.cnki.1000-6753.tces.221472
电力电子 |
正-反激变换拓扑的功率传输分配特性及设计考虑
刘树林, 沈一君, 刘旭, 庹汉宇, 王成, 王文强, 吴星
西安科技大学电气与控制工程学院 西安 710054
Power Transmission Distribution Characteristics and Design Considerations of Forward-Flyback Conversion Topology
Liu Shulin, Shen Yijun, Liu Xu, Tuo Hanyu, Wang Cheng, Wang Wenqiang, Wu Xing
College of Electrical and Control Engineering Xi’ an University of Science & Technology Xi’an 710054 China
全文: PDF (2650 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 通过分析正-反激变换拓扑工作于不同模式时的功率传输特性及其与负载电阻的关系,发现工作于励磁电流断续导电模式(MDCM)时的正激功率和反激功率均随负载电阻的减小而增大,工作于励磁电流连续导电模式(MCCM)时的正激功率维持不变,而反激功率随负载电阻的减小单调增加。对于给定输出功率,推导得出了开关管电流应力与正激功率和反激功率之间的解析关系式,探讨了功率分配对正-反激变换拓扑效率的影响,并指出减小正激功率有利于降低开关管电流应力,而减小反激功率有利于提高正-反激变换拓扑效率。综合考虑功率传输特性对正-反激变换拓扑电气性能的影响,提出一种在给定负载变化范围内,确保输出功率最大时使得正激功率与反激功率相等的磁性元件参数设计方法,实验结果验证了理论分析的正确性和设计方法的可行性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘树林
沈一君
刘旭
庹汉宇
王成
王文强
吴星
关键词 正-反激变换拓扑功率传输分配正激功率反激功率设计    
Abstract:The unidirectional magnetization of the basic forward conversion topology will lead to the transformer’s saturation, and various magnetic reset measures have been proposed. Among them, the primary side magnetic reset only consumes the excitation energy on the resistance or feedback to the input side, so the excitation energy can not be fully utilized. Therefore, it is not beneficial to improve energy transmission efficiency of the converter. The secondary-side reset forward-flyback conversion topology composed of four diodes on the secondary side can forward energy and excitation energy to the load, thus improving the energy efficiency. However, the excitation inductor and the forward inductor affect the power transmission and distribution characteristics and the switch current stress of the conversion topology. Therefore, this paper studies the relationship between power transmission characteristics, switch current stress and the magnetic components parameters. The design method of magnetic components parameters is proposed by comprehensively considering the influence of forward and flyback transmission power ratio on the electrical performance of the conversion topology.
For the forward-flyback converter, the forward inductor can only work in DCM. Compared with the minimum excitation inductor current in one cycle with zero, its working mode can be divided into Magnetizing current continuous conduction mode (MCCM) and Magnetizing current Discontinuous Conduction Mode (MDCM). Its power transmission characteristics and its relationship with a load resistance RL under different modes show that both the forward power PFW and flyback power PFB increase with the decrease of the RL when the conversion topology works in the MDCM. When the RL is reduced to make the conversion topology enter the MCCM, the PFW increases to the maximum value and no longer increases with the decrease of the RL, while the PFB still increases with the decrease of the RL.
The critical excitation inductance Lmc corresponding to PFW=PFB is defined by analyzing the influence of excitation inductance on the power transmission and distribution characteristics of the conversion topology. For the given output power, the PFW increases, and the PFB decreases with the increase of excitation inductance. When the excitation inductor equals Lmc, and the conversion topology works in MDCM, the PFW equals PFB. The PFB increases, and the PFW decreases with the increase of the transformer turn ratio.
Regarding the influence of power transmission distribution on the switch current stress, for the given output power, the switch current stress decreases with the decrease of PFW. Therefore, reducing the PFW can reduce the switch current stress. However, reducing the PFW will increase the PFB, while increasing the PFB requires increasing the transformer air gap to reduce the magnetizing inductance, which will increase the transformer loss. Therefore, reducing the PFW is not beneficial to improving the efficiency of the conversion topology.
Regarding the influence of the distribution of PFW and PFB on the electrical performance of the conversion topology, reducing the PFW is beneficial to reducing the current stress of the switch, and reducing the PFB can improve the efficiency of the conversion topology. Therefore, to improve the efficiency of the conversion topology and not cause the current stress of the switch to be too high, a component parameter design method is proposed to guarantee that PFW=PFB when the output power reaches the maximum within the given load range.
Experimental results verify the correctness of the theoretical analysis and the feasibility of the proposed design method. The proposed design method for component parameters can develop a high-performance forward-flyback conversion topology and promote its popularization and application.
Key wordsForward-flyback conversion topology    power transmission distribution    forward power    flyback power    design   
收稿日期: 2022-07-30     
PACS: TM46  
基金资助:国家自然科学基金资助项目(51777167, 51604217)
通讯作者: 刘树林,男,1964年生,博士,教授,博士生导师,研究方向为开关变换器的分析与设计及本质安全电路等。E-mail: lsigma@163.com   
作者简介: 沈一君,女,1998年生,硕士研究生,研究方向为开关变换器的分析与设计及本质安全电路。E-mail: 20206029003@stu.xust.edu.cn
引用本文:   
刘树林, 沈一君, 刘旭, 庹汉宇, 王成, 王文强, 吴星. 正-反激变换拓扑的功率传输分配特性及设计考虑[J]. 电工技术学报, 2023, 38(18): 5006-5016. Liu Shulin, Shen Yijun, Liu Xu, Tuo Hanyu, Wang Cheng, Wang Wenqiang, Wu Xing. Power Transmission Distribution Characteristics and Design Considerations of Forward-Flyback Conversion Topology. Transactions of China Electrotechnical Society, 2023, 38(18): 5006-5016.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.221472          https://dgjsxb.ces-transaction.com/CN/Y2023/V38/I18/5006