电工技术学报  2019, Vol. 34 Issue (15): 3244-3252    DOI: 10.19595/j.cnki.1000-6753.tces.180834
电力系统 |
基于IHHT的多测点行波法故障测距在全并联AT牵引网中的研究
熊列彬1, 吴高华1, 王志洋2
1. 西南交通大学电气工程学院 成都 611756;
2.广东工业大学自动化学院 广州 510006
Study onFault Location ofMulti Measuring Points Traveling Wave Method Based on IHHT in All Parallel AT Traction Network
Xiong Liebin1, Wu Gaohua1, Wang Zhiyang2
1. School of Electrical Engineering Southwest Jiaotong University Chengdu 611756 China;
2. School of Automation Guangdong University of Technology Guangzhou 510006 China
全文: PDF (1073 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 针对当前全并联自耦变压器(AT)牵引网线路参数不均匀,牵引供电系统因故障导致结构的改变使得故障测距精度不足的问题,将行波法运用到牵引网故障测距中,并考虑到牵引网电气参数的改变及行波色散效应导致行波波速不稳定的问题,提出了一种基于多测点的故障测距方法。该方法首先通过在横联线间串入高频阻波器完成对电压行波波头的有效辨识,然后利用改进的希尔伯特-黄变换对行波波头进行捕捉,最后利用多测点测距方程得到故障测距结果。Matlab/Simulink的仿真结果表明,所提测距算法基本与波速无关,不受牵引网结构、参数变化的影响,比传统牵引网故障测距算法具有更高的精度。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
熊列彬
吴高华
王志洋
关键词 全并联AT供电行波测距希尔伯特-黄变换EEMD分解多测点故障行波    
Abstract:Aiming at the current problem that the all parallel AT traction network line parameters are not uniform and the traction power supply system is structurally changed due to faults, which makes the insufficient accuracy of fault location. The traveling wave method is applied to the fault location of the traction network in this study,considering the change of the electrical parameters of the traction network and the traveling wave dispersion effect would cause the traveling wave velocity unstable, this paper proposes a fault location method based on multimeasuring points. This method can effectively identify the voltage traveling wave head by serially inserting a high frequency trap between the transverse lines, and then utilize the improved Hilbert-Huang transform to capture the traveling wave head,finally on the basis of the multimeasuring points equationobtainedfault location results. According to the simulation results of Matlab/Simulink, the proposed multi measuring points algorithm is almost independent of the wave velocity and is not affected by changes in the structure and parameters of the traction network, it has higher accuracy than the traditional traction network fault location algorithm.
Key wordsAll parallel AT power supply    traveling wave    fault location    Hilbert-Huang transform    EEMD decomposition    multi measuring points    fault traveling wave   
收稿日期: 2018-05-15      出版日期: 2019-08-13
PACS: TM773  
基金资助:国家自然科学基金(51777174)和中国铁路总公司科技计划研究(2017J010-D)资助
通讯作者: 吴高华,男,1992 年生,硕士研究生,研究方向为电力系统保护与控制、新型继电保护原理。E-mail:gh_wu@foxmail.com   
作者简介: 熊列彬,男,1972 年生,硕士,副教授,研究方向为数字化变电站和牵引供电系统继电保护。E-mail:xlbbear@126.com
引用本文:   
熊列彬, 吴高华, 王志洋. 基于IHHT的多测点行波法故障测距在全并联AT牵引网中的研究[J]. 电工技术学报, 2019, 34(15): 3244-3252. Xiong Liebin, Wu Gaohua, Wang Zhiyang. Study onFault Location ofMulti Measuring Points Traveling Wave Method Based on IHHT in All Parallel AT Traction Network. Transactions of China Electrotechnical Society, 2019, 34(15): 3244-3252.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.180834          https://dgjsxb.ces-transaction.com/CN/Y2019/V34/I15/3244