Abstract：Permanent magnet synchronous motor (PMSM) is applied in high performance control systems more and more widely, but the cogging torque will affect the control precision of the system. A novel method of combining different permanent magnets (PMs) in axial direction is proposed for reducing cogging torque in this paper. The expression of cogging torque was analyzed based on energy method and Fourier decomposition method, and the size of combined PMs can be deduced according to the formula. Finite element method (FEM) was used to verify the effectiveness of the method, and the optimal combination was derived. The air-gap flux density and PM consumption of the optimal combination were compared with the original motor. The proposed method was verified to be economic and effective. Finally, other performance of the proposed motor was analyzed, including the harmonic contents of the back-EMF. It is concluded that the new rotor proposed can improve the performance of the motor.
鲍晓华, 吴长江, 方金龙. 轴向永磁体组合削弱表贴式永磁同步电机齿槽转矩的方法[J]. 电工技术学报, 2018, 33(18): 4231-4238.
Bao Xiaohua, Wu Changjiang, Fang Jinlong. Cogging Torque Reduction in Surface-Mounted Permanent Magnet Synchronous Motor by Combining Different Permanent Magnets in Axial Direction. Transactions of China Electrotechnical Society, 2018, 33(18): 4231-4238.
[1] 郑江, 代颖, 石坚. 车用永磁同步电机的电磁噪声特性[J]. 电工技术学报, 2016, 31(增刊1): 53-59. Zhen Jiang, Dai Ying, Shi Jian.Electromagnetic noise characteristics of permanent magnet synchronous motor applied in electric vehicle[J]. Transactions of China Electrotechnical Society, 2016, 31(S1): 53-59. [2] Huang X, Tan Q, Li L, et al.Winding temperature field model considering void ratio and temperature rise of a permanent-magnet synchronous motor with high current density[J]. IEEE Transactions on Industrial Electronics, 2017, 64(3): 2168-2177. [3] 陈云云, 朱孝勇, 全力, 等. 基于参数敏感度的双凸极永磁型双定子电机的优化设计和性能分析[J]. 电工技术学报, 2017, 32(8): 160-168. Chen Yunyun, Zhu Xiaoyong, Quan Li, et al.Parameter sensitivity optimization design and perfor- mance analysis of double-salient permanent-magnet double-stator machine[J]. Transactions of China Electrotechnical Society, 2017, 32(8): 160-168. [4] 董剑宁, 黄允凯, 金龙, 等. 高速永磁电机设计与分析技术综述[J]. 中国电机工程学报, 2014, 34(27): 4640-4653. Dong Jianning, Huang Yunkai, Jin Long, et al.Review on high speed permanent magnet machines including design and analysis technologies[J]. Proceedings of the CSEE, 2014, 34(27): 4640-4653. [5] 唐旭, 王秀和, 田蒙蒙, 等. 基于改变定子齿槽参数的异步起动永磁同步电动机齿槽转矩削弱措施研究[J]. 电工技术学报, 2016, 31(23): 1-8. Tang Xu, Wang Xiuhe, Tian Mengmeng, et al.Study of reduction methods of cogging torque in line-start permanent magnet synchronous motor by changing the parameters of stator teeth and slots[J]. Transactions of China Electrotechnical Society, 2016, 31(23): 1-8. [6] Ashabani M, Mohamed A R I. Multiobjective shape optimization of segmented pole permanent-magnet synchronous machines with improved torque characteristics[J]. IEEE Transactions on Magnetics, 2011, 47(4): 795-804. [7] 杨玉波, 王秀和, 丁婷婷. 基于单一磁极宽度变化的内置式永磁同步电动机齿槽转矩削弱方法[J]. 电工技术学报, 2009, 24(7): 41-45. Yang Yubo, Wang Xiuhe, Ding Tingting.Different pole-arc width combination for reducing cogging torque of interior-magnet PMSM[J]. Transactions of China Electrotechnical Society, 2009, 24(7): 41-45. [8] Madhavan R, Fernandes B G.Performance improvement in the axial flux-segmented rotor- switched reluctance motor[J]. IEEE Transactions on Energy Conversion, 2014, 29(3): 641-651. [9] Fang Hongwei, Wang Dan.A novel design method of permanent magnet synchronous generator from perspective of permanent magnet material saving[J]. IEEE Transactions on Energy Conversion, 2017, 32(1): 48-54. [10] Fei W, Luk P C K, Shen J X, et al. Permanent-magnet flux-switching integrated starter generator with different rotor configurations for cogging torque and torque ripple mitigations[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1247-1256. [11] Wang K, Zhu Z Q, Ombach G.Torque enhancement of surface-mounted permanent magnet machine using third-order harmonic[J]. IEEE Transactions on Magnetics, 2014, 50(3): 104-113. [12] Ren W, Xu Q, Li Q.Asymmetrical V-shape rotor configuration of an interior permanent magnet machine for improving torque characteristics[J]. IEEE Transactions on Magnetics, 2015, 51(11): 1-4. [13] Kim K C.A novel method for minimization of cogging torque and torque ripple for interior permanent magnet synchronous motor[J]. IEEE Transactions on Magnetics, 2014, 50(2): 793-796. [14] Zhao W, Zhao F, Lipo T A, et al.Optimal design of a novel V-type interior permanent magnet motor with assisted barriers for the improvement of torque characteristics[J]. IEEE Transactions on Magnetics 2014, 50(11): 1-4. [15] Chen H S, Dorrell D G, Tsai M C.Design and operation of interior permanent-magnet motors with two axial segments and high rotor saliency[J]. IEEE Transactions on Magnetics, 2010, 46(9): 3664-3675. [16] Wang D, Wang X, Yang Y, et al.Optimization of magnetic pole shifting to reduce cogging torque in solid-rotor permanent-magnet synchronous motors[J]. IEEE Transactions on Magnetics, 2010, 46(5): 1228-1234. [17] 杨玉波, 王秀和, 朱常青. 基于分块永磁磁极的永磁电机齿槽转矩削弱方法[J]. 电工技术学报, 2012, 27(3): 73-78. Yang Yubo, Wang Xiuhe, Zhu Changqing.Effect of permanent magnet segmentation on the cogging torque of surface mounted permanent magnet motors[J]. Transactions of China Electrotechnical Society, 2012, 27(3): 73-78. [18] 王秀和. 永磁电机[M]. 北京: 中国电力出版社, 2011.
2018, Vol. 33 
