Characteristic and Magnetic Field Analysis of an Axial Flux Permanent Magnets Maglev Motor with Non-Uniform Air Gap
Qin Wei1,2, Ma Yuhua3, Zhang Jielong1, Lü Gang1
1. School of Electrical Engineering Beijing Jiaotong University Beijing 100044 China; 2. Beijing Rail Transit Electrical Engineering Technology Research Center Beijing 100044 China; 3. Taiyuan Institute of China Coal Technology and Engineering Group Taiyuan 030006 China
Abstract:The main disadvantages of the maglev system are the initial construction cost and the maintenance cost caused by the complex guideway compared to the conventional train. To reduce maglev systems costs, many integrated passive guideway designs have been proposed. The electrodynamic wheel (EDW), composed of a permanent magnet (PM) and conductive plate, is a novel low-cost maglev technology. The Axial Flux Permanent Magnets Maglev Motor (AFPMMM), which has more interaction between PMs and conductor plate than the radial topology, is a type of EDW typology. Several studies have been carried out on the electromagnetic characteristics of AFPMMM with a constant airgap between its primary and secondary in recent years. However, AFPMMM should be operated with a non-uniform air-gap to simultaneously create the propulsion, suspension, and guidance forces. Although finite element analysis (FEA) models are often used to analyze the electromagnetic characteristics of AFPMMM, the analytic model is more efficient and more suitable for the initial design. Moreover, 3-D eddy current forces are difficult to be modeled by FEA, particularly when there is more than one mechanical degree of freedom, such as AFPMMM which rotor is simultaneously rotated and translationally. The three-dimensional (3D) analytical model of the magnetic field in an AFPMMM is proposed, and the influence of the structural parameters on electromagnetic characteristics is studied. Firstly, the basic structure and principle of the proposed motor are introduced. Then, the 3D magnetic field distribution function and its Fourier series of the primary based on the integral approach are proposed. Based on second-order vector potential (SOVP), a 3D analytic model of the motor is proposed in the paper. Thus, the expression of the lift force, thrust force, and power losses can be obtained. The calculations of the magnetic field in the air gap, forces, and power losses are conducted by the finite element method and analytical method. The results show that the analytical model in this paper is correct and practical. Finally, a small-scale prototype is manufactured, and experiments are carried out to verify the predicted results. The lift-to-weight ratio, which is affected by the main structural parameters such as the number of poles, PM radius, PM thickness, and air gap, reflects the suspension property of the AFPMMM. The relationship between the lift-to-weight ratio and the polepairs shows that when the polepairs is 0~3, the ratio increases with the polepairs. When the polepairs is 3~8, the lift-to-weight ratio decreases with the increase of the number of poles. Since the pole pitch is inversely proportional to the number of poles at a fixed radius of the Halbach rotor, a suitable choice of pole pairs should be 3 pairs. When the PM thickness is 10~20 mm with 3 pole pairs, the lift-to-weight ratio increases with the increase of the magnetic flux density in the air gap. When the thickness is over 20 mm, the growth trend of the flux density gradually slows down, so that the lift-to-weight ratio of the system decreases. Therefore, the thickness of PM must be determined to obtain a maximum lift-to-weight ratio. There are no significant difference in comparing the forces, magnetic field, and power losses obtained by analytical and 3-D FEM simulation. The following conclusions can be drawn from the analysis: the proposed analytical model, in which the curvature effect, fringing effect and leakage flux can be taken into account, can provide reasonable estimates of the flux density. The forces calculated by the proposed model agree with those obtained by 3D FEA. The results show that the proposed model, compared with 3D FEA model, can give higher accuracy while saving considerable computation time. Thus, the proposed 3D analytical model can be used to analyze and optimize the AFPMMM. Besides, the proposed 3D analytical model can also be used to calculate the performance characteristics of other AFPMs.
秦伟, 马育华, 张洁龙, 吕刚. 不均匀气隙工况下轴向磁通永磁电动式磁悬浮电机的磁场与力特性分析[J]. 电工技术学报, 2023, 38(4): 889-902.
Qin Wei, Ma Yuhua, Zhang Jielong, Lü Gang. Characteristic and Magnetic Field Analysis of an Axial Flux Permanent Magnets Maglev Motor with Non-Uniform Air Gap. Transactions of China Electrotechnical Society, 2023, 38(4): 889-902.
[1] 吴祥明. 磁浮列车[M]. 上海: 上海科学技术出版社, 2003. [2] 赵牧天, 葛琼璇, 朱进权, 等. 中速磁悬浮列车分段式长定子永磁直线同步电机牵引控制策略[J]. 电工技术学报, 2022, 37(10): 2491-2502. Zhao Mutian, Ge Qiongxuan, Zhu Jinquan, et al.Traction control strategy of segmented long stator permanent magnet linear synchronous motor for medium-speed maglev train[J]. Transactions of China Electrotechnical Society, 2022, 37(10): 2491-2502. [3] 朱进权, 葛琼璇, 孙鹏琨, 等. 高速磁悬浮列车在双端供电模式下的电流控制策略[J]. 电工技术学报, 2021, 36(23): 4937-4947. Zhu Jinquan, Ge Qiongxuan, Sun Pengkun, et al.Current control strategy for high-speed maglev in the double feeding mode[J]. Transactions of China Elec-trotechnical Society, 2021, 36(23): 4937-4947. [4] 章九鼎, 卢琴芬. 长定子直线同步电机齿槽效应的计算与影响[J]. 电工技术学报, 2021, 36(5): 964-972, 1026. Zhang Jiuding, Lu Qinfen.Calculation and influences of cogging effects in long-stator linear synchronous motor[J]. Transactions of China Electrotechnical Society, 2021, 36(5): 964-972, 1026. [5] 朱进权, 葛琼璇, 王晓新, 等. 基于自抗扰和负载功率前馈的高速磁悬浮系统PWM整流器控制策略[J]. 电工技术学报, 2021, 36(2): 320-329. Zhu Jinquan, Ge Qiongxuan, Wang Xiaoxin, et al.Control strategy for PWM rectifier of high-speed maglev based on active disturbance rejection control and load power feed-forward[J]. Transactions of China Electrotechnical Society, 2021, 36(2): 320-329. [6] 熊嘉阳, 邓自刚. 高速磁悬浮轨道交通研究进展[J]. 交通运输工程学报, 2021, 21(1): 177-198. Xiong Jiayang, Deng Zigang.Research progress of high-speed maglev rail transit[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 177-198. [7] 徐飞, 罗世辉, 邓自刚. 磁悬浮轨道交通关键技术及全速度域应用研究[J]. 铁道学报, 2019, 41(3): 40-49. Xu Fei, Luo Shihui, Deng Zigang.Study on key technologies and whole speed range application of maglev rail transport[J]. Journal of the China Railway Society, 2019, 41(3): 40-49. [8] 胡道宇, 冯馨月, 张志华. 超导电动悬浮系统阻尼特性研究[J]. 中国电机工程学报, 2021, 41(13): 4679-4688. Hu Daoyu, Feng Xinyue, Zhang Zhihua.Study on the damping characteristics of superconducting electro-dynamic suspension system[J]. Proceedings of the CSEE, 2021, 41(13): 4679-4688. [9] 沈志云. 关于我国发展真空管道高速交通的思考[J]. 西南交通大学学报, 2005, 40(2): 133-137. Shen Zhiyun.On developing high-speed evacuated tube transportation in China[J]. Journal of Southwest Jiaotong University, 2005, 40(2): 133-137. [10] 王志涛, 蔡尧, 龚天勇, 等. 基于场-路-运动耦合模型的超导电动悬浮列车特性研究[J]. 中国电机工程学报, 2019, 39(4): 1162-1171. Wang Zhitao, Cai Yao, Gong Tianyong, et al.Characteristic studies of the superconducting electro-dynamic suspension train with a field-circuit-motion coupled model[J]. Proceedings of the CSEE, 2019, 39(4): 1162-1171. [11] 巫川, 李冠醇, 王东. 永磁电动悬浮系统三维解析建模与电磁力优化分析[J]. 电工技术学报, 2021, 36(5): 924-934. Wu Chuan, Li Guanchun, Wang Dong.3-D analytical modeling and electromagnetic force optimization of permanent magnet electrodynamic suspension system[J]. Transactions of China Electrotechnical Society, 2021, 36(5): 924-934. [12] Fujii N, Hayashi G, Sakamoto Y.Characteristics of magnetic lift, propulsion and guidance by using magnet wheels with rotating permanent magnets[C]//Thirty-Fifth IAS Annual Meeting and World Con-ference on Industrial Applications of Electrical Energy, Rome, Italy, 2002: 257-262. [13] Fujii N, Nonaka S, Hayashi G.Design of magnet wheel integrated own drive[J]. IEEE Transactions on Magnetics, 1999, 35(5): 4013-4015. [14] Fujii N, Chida M, Ogawa K.Three dimensional force of magnet wheel with revolving permanent magnets[J]. IEEE Transactions on Magnetics, 1997, 33(5): 4221-4223. [15] Qin Wei, Bird J Z.Electrodynamic wheel magnetic rolling resistance[J]. IEEE Transactions on Magnetics, 2017, 53(8): 1-7. [16] Bird J.An investigation into the use of electro-dynamic wheels for high-speed ground trans-portation[D]. Madison: The University of Wisconsin, 2007. [17] 孙明灿, 唐任远, 韩雪岩, 等. 轴向磁通永磁电机空载气隙磁场建模分析[J]. 中国电机工程学报, 2018, 38(5): 1525-1533. Sun Mingcan, Tang Renyuan, Han Xueyan, et al.Analysis and modeling for open circuit air gap magnetic field prediction in axial flux permanent magnet machines[J]. Proceedings of the CSEE, 2018, 38(5): 1525-1533. [18] 佟文明, 李建盛, 曹博宇, 等. 高频轴向磁通永磁电机永磁体涡流损耗三维解析模型[J]. 中国电机工程学报, 2021, 41(6): 1992-2002. Tong Wenming, Li Jiansheng, Cao Boyu, et al.Three-dimensional analytical model of eddy current loss of permanent magnet in high frequency axial flux permanent magnet machine[J]. Proceedings of the CSEE, 2021, 41(6): 1992-2002. [19] 王厚生, 杜玉梅, 夏平畴, 等. 电动式磁悬浮列车金属板轨道结构的研究[J]. 中国电机工程学报, 2005, 25(7): 162-165. Wang Housheng, Du Yumei, Xia Pingchou, et al.Research on DMS train metal guideways con-struction[J]. Proceedings of the CSEE, 2005, 25(7): 162-165. [20] Paul S, Bird J Z.A 3-D analytic eddy current model for a finite width conductive plate[J]. COMPEL: the International Journal for Computation and Mathe-matics in Electrical and Electronic Engineering, 2014, 33(1/2): 789-795. [21] 陈殷, 李耀华. 一种用于真空管道高速磁浮的涡流制动装置分析与设计[J]. 中国电机工程学报, 2020, 40(5): 1683-1694. Chen Yin, Li Yaohua.Analyzing and designing a new kind of eddy current braking device used in high speed maglev in vacuum pipeline[J]. Proceedings of the CSEE, 2020, 40(5): 1683-1694.