电工技术学报  2016, Vol. 31 Issue (24): 88-95    DOI:
放电等离子体及应用专题 |
基于分形理论的SF6/N2混合气体放电仿真
李敏1, 2, 汪沨1, 许松枝1, 陈晓林1, 黄墀志1, 谢望君1
1. 湖南大学电气与信息工程学院 长沙 410082;
2. 长沙供电公司 长沙 410000
Simulation of Discharge in SF6/N2 Gas Mixtures Based on Fractal Theory
Li Min1, 2, Wang Feng1, Xu Songzhi1, Chen Xiaolin1, Huang Chizhi1, Xie Wangjun1
1. School of Electrical and Information Engineering Hunan University Changsha 410082 China;
2. Changsha Power Supply Company Changsha 410000 China
全文: PDF (28918 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 为了研究SF6/N2混合气体电介质击穿现象,利用编写的Matlab程序对放电通道发展过程进行数值模拟,并结合分形几何原理计算放电树枝的分形维数。基于分形理论,建立了考虑空间电荷分布和引入物理时间的棒-板分形放电仿真模型,通过有限元方法(FEM)计算空间电场,并首次结合通量校正传输(FCT)法求解带电粒子连续性方程,研究了不同发展概率指数、不同放电阈值和SF6含量变化下分形放电特性。结果表明:概率指数越大,SF6含量越高,则分形维数越小,放电树枝分叉也越少;体积含量50%/50%的SF6/N2混合气体放电分形维数D=1.219 2,整个放电过程流注发展平均速度为1.15Mm/s,并得到了不同时刻空间电荷及轴向电场与电子浓度的分布。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
李敏
汪沨
许松枝
陈晓林
黄墀志
谢望君
关键词 放电分形维数SF6/N2混合气体有限元方法通量校正传输法概率指数    
Abstract:In this paper, the model of dielectric breakdown in SF6/N2 mixed gas is simulated by using the Matlab programs. This rod-plane model is established considering the distribution of space charge and introducing physical time, based on the fractal theory. The finite element method (FEM) is used to solve the electric field, and particle continuity equations are solved by the flux corrected transport (FCT) algorithm. Moreover, the characteristics of fractal discharge under various scenarios are analyzed, such as different probability exponents, different discharge thresholds, and different percentages of SF6 and so on. The simulation results show that the number of branches and fractal dimension decrease with the increasing of probability exponent and the percentage of SF6. The discharge fractal dimension D of 50%/50% SF6/N2 gas mixture equals to 1.219 2, and the average velocity during the discharge process of streamer propagation is 1.15Mm/s. Moreover, the distributions of charge density in space, electric field alone the axis, and electrons density alone the axis are calculated.
Key wordsDischarge,    fractal    dimension,    SF6/N2    mixed    gas,    finite    element    method,    flux    corrected    transport,    probability    exponent   
收稿日期: 2015-10-29      出版日期: 2017-01-03
PACS: TM213  
基金资助:教育部新世纪优秀人才支持计划基金(NCET-11-0130)和高等学校博士学科点专项科研基金(20120161110009)资助项目
作者简介: 李 敏 男,1989年生,硕士研究生,研究方向为气体放电仿真。E-mail: liminzhenqi@163.com(通信作者)汪 沨 男,1972年生,博士,教授,博士生导师,研究方向为电力设备绝缘技术、气体放电及其应用技术等。E-mail: Wangfeng55@263.net
引用本文:   
李敏, 汪沨, 许松枝, 陈晓林, 黄墀志, 谢望君. 基于分形理论的SF6/N2混合气体放电仿真[J]. 电工技术学报, 2016, 31(24): 88-95. Li Min, Wang Feng, Xu Songzhi, Chen Xiaolin, Huang Chizhi, Xie Wangjun. Simulation of Discharge in SF6/N2 Gas Mixtures Based on Fractal Theory. Transactions of China Electrotechnical Society, 2016, 31(24): 88-95.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/Y2016/V31/I24/88