电工技术学报  2021, Vol. 36 Issue (12): 2495-2504    DOI: 10.19595/j.cnki.1000-6753.tces.L90327
先进功率半导体器件及其封装、集成与应用专题(特约主编:王来利 教授) |
基于GaN的高频Boost变换器优化设计
王忠杰1, 王议锋1, 陈庆2, 陈博1, 王浩3
1.天津大学智能电网教育部重点实验室 天津 300072;
2.国网江苏省电力有限公司 南京 211000;
3.天津工业大学电工电能新技术天津市重点实验室 天津 300387
Optimal Design of High Frequency Boost Converter Based on GaN
Wang Zhongjie1, Wang Yifeng1, Chen Qing2, Chen Bo1, Wang Hao3
1. Key Laboratory of Smart Grid of Ministry of Education Tianjin University Tianjin 300072 China;
2. State Grid Jiangsu Electric Power Co. Ltd Nanjing 211000 China;
3. Tianjin Key Laboratory of Electrical and Electronic Technology Tiangong University Tianjin 300387 China
全文: PDF (8239 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 该文围绕同步整流型Boost拓扑效率提升这一关键问题展开研究。作为Boost变换器三种工作模式之一,临界导通模式(BCM)下的Boost变换器可以实现主功率开关的零电压开通或谷底开通以及续流管的零电流关断,有助于提升变换器效率。此外,采用同步整流技术可进一步减小传统续流二极管的导通损耗。该文从BCM下的参数设计出发,重点研究变换器的死区时间配置方法。该方法理论上减小了内部体二极管的导通损耗,在输出电流较大的情况下,有助于进一步提升变换器效率。此外,还总结Boost变换器的主要损耗计算方法。最后,利用GaN功率开关器件,搭建一台额定功率为500W的实验样机,其峰值效率达到了98%,功率密度达到了96W/in3(1in3=1.638 71×10-5m3)。实现了高效、高功率密度的设计目标,验证了理论分析的正确性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
王忠杰
王议锋
陈庆
陈博
王浩
关键词 Boost变换器同步整流死区配置效率    
Abstract:This paper focuses on the key issue of improving the efficiency of synchronous rectification Boost topology. As one of the three working modes, Boost converter in boundary conduction mode can achieve zero voltage turn-on or valley turn-on of the main power switch as well as zero current turn-off of the freewheeling switch, which helps to improve the efficiency of the converter. In addition, the use of synchronous rectification technology can further reduce the conduction loss of traditional freewheeling diodes. Based on the parameter design in BCM mode, this paper focuses on the dead time configuration method of the converter. This method theoretically reduces the conduction loss of the internal body diode and further improves the efficiency of the converter when the output current is large. In addition, the main loss calculation method of Boost converter is summarized. Finally, using the GaN power switching device, an experimental prototype with a rated power of 500W was built, and its peak efficiency reached 98% and the power density reached 96W/in3. The design goals of high efficiency and high power density were achieved, and the accuracy and correctness of the theoretical analysis were verified.
Key wordsBoost converter    synchronous rectification    dead zone configuration    efficiency   
收稿日期: 2020-07-09     
PACS: TM46  
基金资助:国家重点研发计划资助项目(2018YFB0904700)
通讯作者: 陈 博, 男,1989年生,博士,研究方向为多谐振直流变换器。E-mail: cb92614@126.com   
作者简介: 王忠杰,男,1997年生,硕士研究生,研究方向为高频直流变换器及其控制。E-mail:13921836821@163.com
引用本文:   
王忠杰, 王议锋, 陈庆, 陈博, 王浩. 基于GaN的高频Boost变换器优化设计[J]. 电工技术学报, 2021, 36(12): 2495-2504. Wang Zhongjie, Wang Yifeng, Chen Qing, Chen Bo, Wang Hao. Optimal Design of High Frequency Boost Converter Based on GaN. Transactions of China Electrotechnical Society, 2021, 36(12): 2495-2504.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.L90327          https://dgjsxb.ces-transaction.com/CN/Y2021/V36/I12/2495