Online Temperature Estimation Method for Electric Vehicle Power Battery
Sun Jinlei1,Zhu Chunbo2,Li Lei1,Li Qiang1
1.School of Automation Nanjing University of Science and Technology Nanjing 210094 China 2.School of Electrical Engineering and Automation Harbin Institute of Technology Harbin 150001 China
Abstract：The complex electrochemical reaction inside the power battery of electric vehicle tends to be influenced by the environment temperature, which causes the attenuation of the power and capacity. In order to estimate accurately the temperature of battery, this paper presents the battery temperature online estimation method based on the thermal balance equation. The heat generation considers the reversible entropy change and irreversible overpotential, besides, the heat exchange is between battery and the external environment. The one order equivalent circuit model combined with extended Kalman filter in real-time is used to estimate model parameters online, and the battery temperature recursive formula is obtained using thermal balance equation. The battery temperature of the current sample time is estimated according to that of the last sample time. The proposed method is verified by federal urban driving schedule (FUDS) test. The proposed method can estimate battery temperature in real time, and the estimation error is within 1 ℃.
孙金磊,朱春波,李磊,李强. 电动汽车动力电池温度在线估计方法[J]. 电工技术学报, 2017, 32(7): 197-203.
Sun Jinlei,Zhu Chunbo,Li Lei,Li Qiang. Online Temperature Estimation Method for Electric Vehicle Power Battery. Transactions of China Electrotechnical Society, 2017, 32(7): 197-203.
[1] Chan C C,Bouscayrol A,Chen K Y.Electric,hybrid,and fuel-cell vehicles:architectures and modeling[J].IEEE Transactions on Vehicular Techno-logy,2010,59(2):589-598. [2] Ji Y,Wang C Y.Heating strategies for Li-ion batteries operated from subzero temperatures[J].Electrochimica Acta,2013,107:664-674. [3] Zhao J,Rao Z,Li Y.Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery[J].Energy Conversion and Management,2015,103:157-165. [4] Lin C,Xu S,Li Z,et al.Thermal analysis of large-capacity LiFePO4 power batteries for electric vehicles[J].Journal of Power Sources,2015,294:633-642. [5] 连湛伟,石欣,克潇,等.电动汽车充换电站动力电池全寿命周期在线检测管理系统[J].电力系统保护与控制,2014,42(12):137-142. Lian Zhanwei,Shi Xin,Ke Xiao,et al.The whole life cycle on-line detection and management system of power battery in the electric vehicle charging and exchanging station[J].Power System Protection and Control,2014,42(12):137-142. [6] Samba A,Omar N,Gualous H,et al.Development of an advanced two-dimensional thermal model for large size lithium-ion pouch cells[J].Electrochimica Acta,2014,117:246-254. [7] Richardson R R,Ireland P T,Howey D A.Battery internal temperature estimation by combined impedance and surface temperature measurement[J].Journal of Power Sources,2014,265:254-261. [8] Debert M,Colin G,Bloch G,et al.An observer looks at the cell temperature in automotive battery packs[J].Control Engineering Practice,2013,21(8):1035-1042. [9] Tourani A,White P,Ivey P.A multi scale multi-dimensional thermo electrochemical modelling of high capacity lithium-ion cells[J].Journal of Power Sources,2014,255:360-367. [10]Thomas K E,Newman J.Thermal modeling of porous insertion electrodes[J].Journal of the Electrochemical Society,2003,150(2):176-192. [11]Damay N,Forgez C,Bichat M,et al.Thermal modeling of large prismatic LiFePO4/graphite battery,coupled thermal and heat generation models for characterization and simulation[J].Journal of Power Sources,2015,283:37-45. [12]Zhang Z Q,Jia L,Zhao N,et al.Thermal modeling and cooling analysis of high-power lithium ion cells[J].Journal of Thermal Science,2011,20(6):570-575. [13]Wang T,Tseng K J,Zhao J Y,et al.Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies[J].Applied Energy,2014,134:229-238. [14]陈大分,姜久春,王占国,等.动力锂离子电池分布参数等效电路模型研究[J].电工技术学报,2013,28(7):169-176. Chen Dafen,Jiang Jiuchun,Wang Zhanguo,et al.Research on distribution parameters equivalent-circuit model of power Lithium-Ion batteries[J].Transactions of China Electrotechnical Society,2013,28(7):169-176. [15]谢涛,曹军威,高田,等.基于滑动最小二乘算法和电池荷电状态的储能系统平滑控制策略[J].电力系统保护与控制,2015,43(5):1-7. Xie Tao,Cao Junwei,Gao Tian,et al.An energy story system smoothing control strategy based on sliding least square algorithm and battery SOC[J].Power System Protection and Contol,2015,43(5):1-7. [16]Kalman R E.A new approach to linear filtering and prediction problem[J].Journal of Basic Engineering,1960,82(1):35-45. [17]冯飞,宋凯,逯仁贵,等.磷酸铁锂电池组均衡控制策略及荷电状态估计算法[J].电工技术学报,2015,30(1):22-29. Feng Fei,Song Kai,Lu Rengui,et al.Equalization control strategy and SOC estimation for LiFePO4 battery pack[J].Transactions of China Electrotechnical Society,2015,30(1):22-29. [18]Plett G L.Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs-part 1[J].Journal of Power Sources,2004,134(2):252-261. [19]刘艳莉,戴胜,程泽,等.基于有限差分扩展卡尔曼滤波的锂离子电池SOC估计[J].电工技术学报,2014,29(1):221-228. Liu Yanli,Dai Sheng,Cheng Ze,et al.Estimation of state of charge of lithium-ion battery based on finite difference extended Kalman filter[J].Transactions of China Electrotechnical Society,2014,29(1):221-228. [20]Schuster E,Ziebert C,Melcher A,et al.Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell[J].Journal of Power Sources,2015,286:580-589. [21]林成涛,李腾,陈全世.锰酸锂动力蓄电池散热影响因素分析[J].兵工学报,2010,31(1):88-93. Lin Chengtao,Li Teng,Chen Quanshi.Analysis of the heat dissipation capability influence factors of LiMn2O4-based lithium-ion power battery[J].Acta Armamentarii,2010,31(1):88-93. [22]Forgez C,Do D V,Friedrich G,et al.Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery[J].Journal of Power Sources,2010,195(9):2961-2968.
2017, Vol. 32 
