Compare of Lightning Impulse Surface Flashover Characteristics for G/E in Liquid Nitrogen and Transformer Oil
Yang Xin1, Li Weiguo2, Wei Bin3, Zhang Hongjie3, Qiu Ming3
1.College of Electrical and Information Engineering Changsha University of Science and TechnologyChangsha 410114 China; 2.School of Electrical and Electronic Engineering North China Electric Power UniversityBeijing 102206 China; 3.Superconducting Electric Power Department China Electric Power Research InstituteBeijing 100192 China
Abstract:As the voltage level of super conducting power devices increasing,the significance of the study on flashover characteristics in liquid nitrogen becomes more and more important.Glass fiber reinforced epoxy composite material (G/E) is an important insulating and supporting material for HTS device.For deeper exploring the surface flashover characteristics in liquid nitrogen,the differences of flashover voltages,flash over time and flashover traces for G/E material are compared under different voltage applied methods in liquid nitrogen and transformer oil by experiments.It is believed that because of the different characteristics of liquid nitrogen and transformer oil,there would have different stresses caused by temperature shock on the surface of solid dielectric and differences on forming process,constituents and decomposition product of gas layers when flashover in the two environments.Those are the main reasons of different flashover phenomenon in the two environments.By the method of contrastive analysis,the impulse surface flashover characteristics in liquid nitrogen are deeper explored,the results could provide principle reference for dielectric design of HTS devices.
[1] 肖立业,林良真.我国超导技术研究进展及展望[J].电工技术学报,2005,20(1):1-7. Xiao Liye,Lin Liangzhen.Recent advances and prospect in the development of superconducting technology in China[J].Transactions of China Electrotechnical Society,2005,20(1):1-7. [2] 刘瑞芳,马菁.超导电力装置电流引线迫流冷却传热分析[J].电工技术学报,2014,29(1):196-201. Liu Ruifang,Ma Jing.Heat transfer analysis of force-cooled current leads in superconducting electric equipment[J].Transactions of China Electrotechnical Society,2014,29(1):196-201. [3] 藤玉平,戴少涛,魏周荣,等.ITER装置超导磁体线圈导体用超导电缆的绞制[J].电工技术学报,2013,28(4):7-12. Teng Yuping,Dai Shaotao,Wei Zhourong,et al.Cabling for the superconducting cable of magnet coils for ITER[J].Transactions of China Electrotechnical Society,2013,28(4):7-12. [4] 张晚英,胡雪峰,周辉,等.改进型饱和铁心高温超导限流器的实验研究[J].电工技术学报,2014,29(11):169-176. Zhang Wanying,Hu Xuefeng,Zhou Hui,et al.Experimental research on an improved saturated core high temperature superconducting fault current limiter[J].Transactions of China Electrotechnical Society,2014,29(11):169-176. [5] 褚建峰,孟向军.直流SMC铁芯高温超导故障限流器的研究[J].电力系统保护与控制,2014,42(13):59-63. Zhu Jianfeng,Meng Xiangjun.Study of DC high temperature superconducting fault current limiter using soft magnetic composites[J].Power System Protection and Control,2014,42(13):59-63. [6] 王展,吴威,张文嘉,等.超导磁储能装置对输电线路多边形特性距离保护的影响分析[J].电力系统保护与控制,2014,42(6):8-13. Wang Zhan,Wu Wei,Zhang Wenjia,et al.Effects analysis of SMES device on polygon distance relay of transmission line[J].Power System Protection and Control,2014,42(6):8-13. [7] Reis C T,Dada A,Masuda T,et al.Planned grid installation of high temperature cable in Albany,NY[C]//Power Engineering Society General Meeting,2004:1436-1440. [8] Kim D W,Jiang H M,Lee C H,et al.Development of the 22.9 kV class HTS power cable in LG cable[J].IEEE Transactions on Applied Superconductivity,2005,15(2):1723-1726. [9] Choi J W,Choi J H,Kim H J,et al.A study on designing the electrical insulation of condenser-type terminations for 154 kV class HTS cables[J].Physica C Superconductivity,2009,32(5):1707-1711. [10]Kwag D S,Cheon H G,Kim J H,et al.The electrical insulation characteristics for a HTS cable termination[J].IEEE Transactions on Applied Superconductivity,2006,16(2):1618-1621. [11]Cheon H G,Choi J W.Insulation design of 60 kV class bushing at the cryogenic temperature[J].IEEE Transactions on Applied Superconductivity,2010,20(3):1186-1189. [12]Rodrigo H,Baumgartinger W,Heller G H,et al.Surface flashover of cylindrical G10 under AC and DC voltages at room and cryogenic temperatures[J].IEEE Transactions on Applied Superconductivity,2011,21(3):1409-1412. [13]Li S,Sun H,Chen Y,et al.Study of surface flashover and breakdown characteristics in liquid nitrogen for SFCL application[J].IEEE Transactions on Applied Superconductivity,2014,24(3):5600805. [14]杨鑫,李卫国,郭昱延,等.液氮中微秒级脉冲下的沿面闪络特性[J].中国电机工程学报,2013,33(7):170-176. Yang Xin,Li Weiguo,Guo Yuyan,et al.Surface discharge characteristic under microsecond impulse in liquid nitrogen[J].Proceedings of the CSEE,2013,33(7):170-176. [15]杨鑫,郭昱延,李卫国,等.G/R 和 PTFE 在液氮中的冲击沿面闪络特性[J].高电压技术,2015,41(2):654-661. Yang Xin,Guo Yuyan,Li Weiguo,et al.Impulse surface flashover characteristics of G/R and PTFE in liquid nitrogen[J].High Voltage Engineering,2015,41(2):654-661. [16]Torre L,Kenny J M,Maffezzoli A M.Degradation behavior of a composite material for thermal protection systems,Part Ⅱ:process simulation[J].Journal of Materials Science,1998,7(33):3145-3149. [17]易法军,梁军,孟松鹤,等.防热复合材料的烧蚀机理与模型研究[J].固体火箭技术,2000,23(4):48-56. Yi Fajun,Liang Jun,Meng Songhe,et al.Study on ablation mechanism and models of heat shield composites[J].Journal of Solid Rocket Technology,2000,23(4):48-56. [18]陈敏孙,江厚满,刘泽金,等.玻璃纤维/环氧树脂复合材料热分解动力学参数的确定[J].强激光与粒子束,2010,22(9):1969-1972. Chen Minsun,Jiang Houman,Liu Zejin,et al.Determination of thermal decomposition kinetic parameters of glass-fiber/epoxy composite[J].High Power Laser and Particle Beams,2010,22(9):1969-1972. [19]Gillan C J,Nagy O,Burke P G,et al.Electron scattering by nitrogen molecules[J].Journal of Physic B,1987,20(17):4585. [20]Sun W,Morrison M A,Isaaes W A,et al.Detailed theoretical and experimental analysis of low-energy electron-N2 scattering[J].Physics Review A,1995,52(2):1229-1256. [21]殷燕.氧气、氮气及其混合气体直流放电的蒙特卡罗模拟[D].保定:河北大学,2003.