Abstract：Electromagnetically induced acoustic emission (EMAE) technique is a new nondestructive testing (NDT). It does nondestructive detection with the effect of dynamic electromagnetic loading to generate acoustic emission waves from the defect in the metal plate. The principle and implementation procedure of the EMAE is deeply analyzed in this paper. The electromagnetic loading equipment is designed and EMAE experiment of defect detection is achieved on the aluminium specimen. The experimental signal was analyzed by using fast Fourier transform (FFT). It researches the change patterns of EMAE signal with the different electromagnetic loading conditions, such as peak pulse current, the duration of the pulse current, loading location and loading history. The experimental results lay a good foundation for the engineering application of EMAE.
张闯, 刘素贞, 金亮, 杨庆新. 基于大电流直接加载的电磁声发射试验[J]. 电工技术学报, 2013, 28(1): 101-105.
Zhang Chuang, Liu Suzhen, Jin Liang, Yang Qingxin. Experimental Study of Electromagnetically Induced Acoustic Emission Based on High Current Loading Directly. Transactions of China Electrotechnical Society, 2013, 28(1): 101-105.
[1] Hellier Charles J. 无损检测与评价手册[M]. 戴光, 徐彦廷, 等译. 北京:中国石化出版社, 2006. [2] Sun Y H, Kang Y H, Qiu C. A new NDT method based on permanent magnetic field perturbation[J]. NDT & E International, 2011, 44(1): 1-7. [3] Chan S C, Grimberg R, Hejase J A, et al. Nonlinear eddy current technique for characterizing case hardening profiles[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1821-1824. [4] Osada H, Nakamura S, Abe T. et al. The effect of ultrasonic resonance on impedance in magnetic rods[J]. IEEE Transactions on Magnetics, 2008, 44(11): 4007-4010. [5] Kozhushko V V, Peter H. Laser-induced focused ultrasound for nondestructive testing and evaluation[J]. Journal of Applied Physiscs, 2008, 103(12): 124902. [6] Finkel P, Godinez V. Electromagnetic simulation of the ultrasonic signal for nondestructive detection of ferromagnetic inclusions and flaws[J]. IEEE Transactions on Magnetics, 2004, 40(4): 2179-2181. [7] 刘素贞, 杨庆新, 金亮, 等. 电磁声发射技术在无损检测中的应用研究[J]. 电工技术学报, 2009, 24(1): 23-27. Liu Suzhen, Yang Qingxin, Jin Liang, et al. Application of electromagnetic acoustic emission technology in non-destructive testing[J]. Transactions of China Electrotechnical Society, 2009, 24(1): 23-27. [8] Jin Liang, Yang Qingxin, Liu Suzhen, et al. Electromagnetic stimulation of the acoustic emission for fatigue crack detection of the sheet metal[J]. IEEE Transactions on Applied Superconductivity, 2010, 20(3): 1848-1851. [9] 张闯, 刘素贞, 杨庆新, 等. 基于FFT和小波包变换的电磁声发射信号处理[J]. 电工技术学报, 2010, 25(4): 24-28. Zhang Chuang, Liu Suzhen, Yang Qingxin, et al. Research on signal processing of electromagnetically induced acoustic emission based on FFT and wavelet packet transform[J]. Transactions of China Electrotechnical Society, 2010, 25(4): 24-28.. [10] Terchi A, Au Y H J. Acoustic emission signal processing[J]. Measurement and Control, 2001, 34(8): 240-244.
2013, Vol. 28 
