Abstract：A typical PWM variable-speed AC motor drive is studied in order to investigate the conducted electromagnetic interference (EMI) at both the input and output sides of the drive. High frequency equivalent circuit for the drive system which the cable are shielded are proposed. The noise path required parasitic components extraction are implemented through theoretical analysis and experimental method. High frequency EMI source models are presented to consider PWM switching rise-time modeling. The overall circuit models for common-mode EMI prediction are obtained. The proposed method is verified by comparing the predicted spectrum with experimental tests.
孙铁雷, 林程, 曹万科. 带有屏蔽线缆的电动车辆动力系统共模模型与预测[J]. 电工技术学报, 2012, 27(2): 128-132.
Sun Tielei, Lin Cheng, Cao Wanke. Common Mode Prediction on Cable Shielded Drive System in Electric Vehicle. Transactions of China Electrotechnical Society, 2012, 27(2): 128-132.
[1] Ettanasen C. Influence of power shielded cable and ground on distribution of common mode currents flowing in variable-speed AC motor drive systems[C]. Asia-Pacific International Symposium on Electromagnetic Compatibility, April, Beijing, 2010: 953-956. [2] 孟进, 马伟明, 张磊, 等. PWM变频驱动系统传导干扰的高频模型[J]. 中国电机工程学报, 2008, 28(15): 141-146. [3] Grandi G, Cadadei D, Reggiani U. Common-and differentuial-model HF current components in AC motors supplied by voltage source inverters[J]. IEEE Trans. on Power Electronics, 2004, 19(1): 16-24. [4] He Junping, Jiang Jiangguo, Huang Jiangjiang, et al. Model of EMI coupling paths for an off-line power converter[C]. IEEE Applied Power Electronics and Exposition Conference, 2004:708-713． [5] 裴雪军, 康勇, 熊健, 等. PWM逆变器共模传导电磁干扰的预测[J]. 中国电机工程学报, 2004, 24(8): 83-88. [6] Paul C R. Electromagnetics for engineers: with applications to digital systems and electromagnetic interference[M]. Hoboken: Wiley, 2004． [7] 孙铁雷, 林程, 孙逢春.电动车辆电磁兼容性整车测量与分析[J]. 安全与电磁兼容, 2010(2): 15-18. [8] Moreira A, Lipo T, Venkataramanan G, et al. High frequency modeling for cable and induction motor: overvoltage studies in long cable drives[J]. IEEE Trans. on Industry Applications, 2002, 38(5): 1297-1306 [9] Jettanasen C, Costa F, Vollaire C, et al. Measurements and simulation of common mode conducted noise emissions in adjustable-speed AC drive systems[C]. 20th International Zurich Symposium on Electromagnetic Compatibility (EMC Zurich 2009), Zurich, Switzerland, 2009: 12-16. [10] Ran L, Clare J, Bradley K, et al. Conducted electromagnetic emissions in induction motor drive systems part 2: frequency domain models[J]. IEEE Trans. on Power Electronics, 1998, 13(4): 768-776． [11] Zhu H, Lai J, Hefner A, et al. Modeling-based examination of conducted EMI emission for hard-and soft-switching PWM inverters[J]. IEEE Trans. on Industry Applications, 2001, 37(5): 1383-1393． [12] Lai J, Huang X, Chen S, et al. EMI characterization and simulation with parasitic models for a low-voltage high current AC motor drive[C]. IEEE IAS, Marinadel Rey, California, USA, 2004, 1: 178-185． [13] Huang X, Pepa E, Lai J, et al. EMI characterization with parasitic modeling for a permanent magnet motor drive[C]. IEEE IAS, Salt Lake City, Utah, USA, 200, 1: 416-423．
2012, Vol. 27 
