高寒环境下低温对乙丙橡胶电缆终端界面放电特性的影响

doi:10.19595/j.cnki.1000-6753.tces.181955

Abstract
Figure/Table
References
Related Citation (3)

Download: PDF (6438 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Ethylene-propylene rubber (EPR) cable is the most widely used type in high-speed trains. Several flashover accidents occurred at the cable termination in high altitude and high cold environment. In order to examine the effect of low-temperature on the partial discharge (PD) characteristics of EPR cable termination, a low temperature test system capable of simulating the lowest temperature up to-50°C was established. During the test, EPR cable termination was taken as the test sample, and a comparative study of the PD characteristics and material properties of termination insulation in the range of 20~-40°C was carried out. The results showed that the difference of elastic modulus and free space volume between EPR insulation and stress control tube(SCT) in high altitude and high cold environment led to structural defects between them, which induced the appearance of PD phenomenon inside EPR cable termination. In addition, the PD initial voltage(PDIV) and PD extinction voltage(PDEV) under low-temperature conditions also reduced by more than 40% compared with that at 20°C. At the same time, the breakdown probability of EPR terminations increased significantly, and the shape characteristics of PD patterns have obvious changes at low-temperature. It is verified by experiments that under the high-voltage and low-temperature conditions, the EPR/SCT interface of the termination is prone to structural mismatch, which will lead to the PD phenomenon and seriously threatens the safe and stable operation of EPR cable terminations.

Key words： High-speed trains ethylene-propylene rubber cable high altitude and high cold environment inter-interface discharge organizational mismatch

Received: 26 December 2018 Published: 12 February 2020

PACS:

TM852

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Bai Longlei
	Zhou Lijun
	Xing Limeng
	Li Lini
	Xiang Enxin

Cite this article:

Bai Longlei,Zhou Lijun,Xing Limeng等. Effect of Low Temperature on Interface Discharge Characteristics of Ethylene-Propylene Rubber Cable Termination in High-Cold Environment[J]. Transactions of China Electrotechnical Society, 2020, 35(3): 646-658.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.181955 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/I3/646

[1] Zuidema C, Kegerise W, Fleming R, et al.A short history of rubber cables[J]. IEEE Electrical Insulation Magazine, 2011, 27(4): 45-50.
[2] 张蕴岭, 袁正清. “一带一路”与中国发展战略[M]. 1版. 北京: 社会科学文献出版社, 2017.
[3] Montanari G C.Notes on theoretical and practical aspects of polymeric insulation aging[J]. IEEE Electrical Insulation Magazine, 2013, 29(4): 34-44.
[4] Mazzanti G, Montanari G C, Simoni L.Insulation characterization in multistress conditions by accelerated life tests: an application to XLPE and EPR for high voltage cables[J]. IEEE Electrical Insulation Magazine, 1997, 13(6): 24-34.
[5] Montanar G C I. An investigation on the thermal endurance of EPR model cables[J]. IEEE Transactions on Electrical Insulation, 1990, 25(6): 1046-1055.
[6] Bouguedad D, Mekhaldi A, Jbara O, et al.Physico-chemical study of thermally aged EPDM used in power cables insulation[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2015, 22(6): 3207-3215.
[7] Zhao Quanlin, Li Xiaogang, Gao Jin.Surface degradation of ethylene-propylene-dienemonomer (EPDM) containing 5-ethylidene-2-norbornene(ENB) as diene in artificial weathering environment[J]. Polymer Degration and Stability, 2008, 93(3): 692-699.
[8] Zhao Xiaolei, Yang Xiao, Gao Lei, et al.Tuning the potential distribution of AC cable terminal by stress cone of nonlinear conductivity material[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2017, 24(5): 2686-2693.
[9] 尚康良, 曹均正, 赵志斌, 等. 320kV XLPE高压直流电缆接头附件仿真分析和结构优化设计[J]. 中国电机工程学报, 2016, 36(7): 2018-2024.
Shang Kanglaing, Cao Junzheng, Zhao Zhibin, et al.Simulation analysis and design optimization of 320kV HVDC cable joint[J]. Proceedings of the CSEE, 2016, 36(7): 2018-2024.
[10] Wang Xia, Wang Chencheng, Wu Kai, et al.An improved optimal design scheme for high voltage cable accessories[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2014. 21(1): 5-15.
[11] 王霞, 王陈诚, 吴锴, 等. 一种新型高压电缆附件优化设计方法[J]. 西安交通大学学报, 2013, 47(12): 102-109.
Wang Xia, Wang Chencheng, Wu Kai, et al.New optimal design scheme for high voltage cable accessory[J]. Journal of Xi’an Jiaotong Uniersity, 2013, 47(12): 102-109.
[12] Lei Zhipeng, Song Jiancheng, Tian Muqin, et al.Partial discharges of cavities in ethylene propylene rubber insulation[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2014, 21(4):1647-1659.
[13] Lei Zhipeng, Song Jiancheng, Geng Pulong, et al.Influence of temperature on dielectric properties of EPR and partial discharge behavior of spherical cavity in EPR insulation[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2015, 22(6): 3488-3497.
[14] 雷志鹏, 冯晨, 宋建成, 等. 乙丙橡胶绝缘的表面击穿与沿面放电特性[J]. 高电压技术, 2016, 42(12): 3924-3933.
Lei Zhipeng, Feng Chen, Song Jiancheng, et al.Surface breakdown and surface discharge characteristics of ethylene propylene rubber insulation[J]. High Voltage Engineering, 2016, 42(12): 3924-3933.
[15] 兰莉, 吴建东, 王雅妮, 等. 低密度聚乙烯/乙丙橡胶双层介质的界面空间电荷特性[J]. 中国电机工程学报, 2015, 35(5): 1266-1272.
Lan Li, Wu Jiandong, Wang Yani, et al.Space charge property at the interface in low density polyethylene/ ethylene propyene rubber double-layered insulation[J]. Proceedings of the CSEE, 2015, 35(5): 1266-1272.
[16] Barbara Florkowska, Jozef Roehrich, Pawel Zydron, et al.Interaction of conductor with polymeric materials (XLPE/EPR) at partial discharges[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2012, 19(6): 2119-2127.
[17] Jaroszewski M, Rakowiecki K.Partial discharge inception voltage in transformer natural ester liquid-effect of the measurement method in the presence of moisture[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2017. 24(4): 2477-2482.
[18] 罗俊华, 马翠姣, 邱毓昌, 等. 35 kV及以下XLPE电力电缆试验方法的研究[J]. 电网技术, 2000, 24(12): 58-61.
Luo Junhua, Ma Cuijiao, Qiu Yuchang, et al.Study on test methods of XLPE power cable rated up to 35kV[J]. Power System Technology, 2000, 24(12): 58-61.
[19] 周凯, 吴科, 万利, 等. 无机纳米颗粒抑制中压电缆终端气隙缺陷局部放电的有效性[J]. 电工技术学报, 2016, 31(22): 230-238.
Zhou Kai, Wu Ke, Wan Li, et al.Validity of inorganic nano-particles on the suppression of partial discharge in air gap defects for medium voltage cable terminations[J]. Transactions of China Electrotechnical Society, 2016, 31(22): 230-238.
[20] 徐征宇, 李金忠, 汪可, 等. -40℃条件下油纸绝缘沿面局部放电特性及击穿特性[J]. 中国电机工程学报, 2016, 36(10): 2827-2835.
Xu Zhengyu, Li Jinzhong, Wang Ke, et al.Surface partial dischargeand breakdown characteriatics of oil-paper insulation under -40℃ condition[J]. Proceedings of the CSEE, 2016, 36(10): 2827-2835.
[21] 鲁杨飞, 李庆民, 刘涛, 等. 高频电压下表面电荷分布对沿面放电发展过程的影响[J]. 电工技术学报, 2018, 33(13): 3059-3070.
Lu Yangfei, Li Qingmin, Liu Tao, et al.Effect of surface charge on the surface discharge evolution for polyimide under high frequency voltage[J]. Transactions of China Electrotechnical Society, 2018, 33(13): 3059-3070.
[22] 周远翔, 孙清华, 李光范, 等. 空间电荷对油纸绝缘击穿和沿面闪络的影响[J]. 电工技术学报, 2011, 26(2): 27-33.
Zhou Yuanxiang, Sun Qinghua, Li Guangfan, et al.Effects of space charge on breakdown and creeping discharge of oil-paper insulation[J]. Transactions of China Electrotechnical Society, 2011, 26(2):27-33.
[23] 唐炬, 潘成, 王邸博, 等. 高压直流绝缘材料表面电荷集聚研究进展[J]. 电工技术学报, 2017, 32(8): 10-21.
Tang Ju, Pan Cheng, Wang Dibo, et al.Development of studies about surface charge accumulation on insulating material under HVDC[J]. Transactions of China Electrotechnical Society, 2017, 32(8): 10-21.
[24] 马德柱. 聚合物结构与性能[M]. 1版. 北京: 科学出版社, 2013.
[25] Shaw M T, Macknight W J.聚合物粘弹性引论[M]. 3版. 上海: 华东理工大学出版社, 2012.
[26] 郭红霞. 电线电缆材料——结构?性能?应用[M]. 1版. 北京: 机械工业出版社, 2012.
[27] Du Boxue, Ma Zongle, Gao Yu, et al.Effect of ambient temperature on electrical treeing characteristics in silicone rubber[J]. IEEE Transactions on Dielectrics Electrical Insulation, 2011, 18(2): 401-407.
[28] 焦剑, 雷渭媛. 高聚物结构、性能与测试[M]. 1版. 北京: 化学工业出版社, 2003.
[29] 张东升, 韩永胜, 刘红欣, 等. 高压电缆接头界面压力测试研究[J]. 高电压技术, 2007, 33(5): 173-176.
Zhang Dongsheng, Han Yongsheng, Liu Hongxin, et al.Determination of the pressure distribution at the XLPE cable-rubber interface in a self-pressurized joint[J]. High Voltage Engineering, 2007, 33(5): 173-176.
[30] 邱志斌, 阮江军, 黄道春, 等. 基于支持向量机的棒-板空气间隙击穿电压预测方法及其应用[J]. 电工技术学报, 2017, 32(19): 220-228.
Qiu Zhibin, Ruan Jiangjun, Huang Daochun, et al.Breakdown voltage prediction method of rod-plane air gaps based on support vector machine and its applications[J]. Transactions of China Electrotechnical Society, 2017, 32(19): 220-228.
[31] 张晓红, 张亮, 乐波, 等. 基于局部放电的矩特征分析大电机主绝缘的老化[J]. 中国电机工程学报, 2002, 22(5): 94-98.
Zhang Xiaohong, Zhang Liang, Le Bo, et al.Analysis on aging condition of stator winding insulation of generator based on the moment characteristics of partial discharge[J]. Proceeding of the CSEE, 2002, 22(5): 94-98.
[32] 戴佺民, 齐波, 卓然, 等. 油浸纸套管电容芯子浸渍不良缺陷的放电过程及其特征[J]. 电工技术学报, 2017, 32(7): 181-189.
Dai Quanmin, Qi Bo, Zhuo Ran, et al.Discharge process and characteristics of the poor impregnated defect of capacitor core in oil-immigrated paper bushing[J]. Transactions of China Electrotechnical Society, 2017, 32(7): 181-189.
[33] 刘云鹏, 刘贺晨, 李演达, 等. 直流叠加交流电压下交联聚乙烯中电树枝特性研究[J]. 电工技术学报, 2018, 33(3): 601-608.
Liu Yunpeng, Liu Hechen, Li Yanda, et al.Research of the electrical tree properties in XLPE under DC-AC composite voltages[J]. Transactions of China Electrotechnical Society, 2018, 33(3): 601-608.
[34] 陈平, 唐传林, 廖明义. 高聚物的结构与性能[M]. 2版. 北京: 化学工业出版社, 2012.