1. State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Wuhan 430074 China; 2. College of Electrical and Information Engineering Hunan University Changsha 410082 China; 3. Hubei Huanyee Electromagnetic Equipment Engineering Technology Co. Ltd Wuhan 430205 China
Abstract：As a new type of AC induction machine, the brushless doubly fed induction generator (BDFIG) can be used for grid-connected and standalone power generation. Model predictive current control (PMCC) has attracted much attention due to its intuitive concept and fast dynamic response. However, due to its heavy dependence on the model parameters, the practical application of MPCC in the BDFIG is not satisfactory. In order to overcome this problem, this paper proposes an improved nonparametric predictive current control (NPCC) method, which uses the detected machine information instead of system parameters to predict the current change. Simulation and experimental results show that this method not only keeps the fast dynamic response performance of MPCC, but also is not affected by the change of machine parameters, which means that it is with strong robustness.
[1] McMahon R A, Roberts P C, Wang X, et al. Performance of BDFM as generator and motor[J]. IEE Proceedings-Electric Power Applications, 2006, 153(2): 289-299. [2] 阚超豪, 李航程, 任泰安, 等. 绕线转子无刷双馈电机漏感计算[J]. 电工技术学报, 2019, 34(19): 4017-4027. Kan Chaohao, Li Hangcheng, Ren Taian, et al.Calculation of leakage inductance for wound-rotor brushless doubly-fed machine[J]. Transactions of China Electrotechnical Society, 2019, 34(19): 4017-4027. [3] Liu Yi, Ai Wu, Chen Bing, et al.Control design and experimental verification of the brushless doubly-fed machine for stand-alone power generation applications[J]. IET Electric Power Applications, 2016, 10(1): 25-35. [4] 阚超豪, 赵威, 储成龙, 等. 基于变极绕组的无刷双馈电机起动特性研究[J]. 电工技术学报, 2019, 34(7): 1392-1403. Kan Chaohao, Zhao Wei, Chu Chenglong, et al.Research on starting characteristics of brushless doubly-fed machines based on pole changing winding[J]. Transactions of China Electrotechnical Society, 2019, 34(7): 1392-1403. [5] Sarasola I, Poza J, Oyarbide E, et al.Stability analysis of a brushless doubly-fed machine under closed loop scalar current control[C]//International Conference on Industrial Electronics, Paris, 2006: 1527-1532. [6] Shao S, Abdi E, Barati F, et al.Stator-flux-oriented vector control for brushless doubly-fed induction generator[J]. IEEE Transactions on Industrial Electronics, 2009, 56(10): 4220-4228. [7] Jovanović M G, Yu J, Levi E.Encoderless direct torque controller for limited speed range applications of brushless doubly fed reluctance motors[J]. IEEE Transactions on Industry Applications, 2006, 42(3): 712-722. [8] 陈科, 艾武, 陈冰, 等. 无刷双馈电机发电并网控制研究[J]. 微电机, 2017, 50(3): 43-46. Chen Ke, Ai Wu, Chen Bing, et al.Research on grid-connected control for brushless doubly-fed induction generator[J]. Micromotors, 2017, 50(3): 43-46. [9] 阚超豪, 鲍习昌, 王雪帆, 等. 无刷双馈电机的研究现状与最新进展[J]. 中国电机工程学报, 2018, 38(13): 3939-3959. Kan Chaohao, Bao Xichang, Wang Xuefan, et al.Overview and recent developments of brushless doubly-fed machines[J]. Proceedings of the CSEE, 2018, 38(13): 3939-3959. [10] 刘航航, 韩力. 无刷双馈电机控制策略发展综述[J]. 微特电机, 2010, 50(6): 69-73. Liu hanghang, Han li. Overview on control strategies of brushless doubly-fed machines[J]. Small & Special Electrical Machines, 2010, 50(6): 69-73. [11] Rivera M, Wheeler P, Olloqui A.Predictive control in matrix converters—part I: pinciples, topologies and applications[C]//2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, 2016: 1091-1097. [12] Rivera M, Wheeler P, Olloqui A.Predictive control in matrix converters—part II: control strategies, weaknesses and trends[C]//2016 IEEE International Conference on Industrial Technology, Taipei, 2016: 1098-1104. [13] Rodriguez J, Cortes P.功率变换器和电气传动的预测控制[M]. 北京: 机械工业出版社, 2014. [14] Rivera M, Morales F, Baier C, et al.A modulated model predictive control scheme for a two-level voltage source inverter[C]//2015 IEEE International Conference on Industrial Technology, Seville, Spain, 2015: 2224-2229. [15] Rodriguez J, Kazmierkowski M P, Espinoza J R, et al.State of the art of finite control set model predictive control in power electronics[J]. IEEE Transactions on Industrial Electronics, 2013, 9(2): 1003-1016. [16] 姚绪梁, 黄乘齐, 王景芳, 等. 两相静止坐标系下的永磁同步电动机模型预测功率控制[J]. 电工技术学报, 2021, 36(1): 60-67. Yao Xuliang, Huang Shengqi, Wang Jingfang, et al.Model predictive power control of permanent magnet synchronous motor in two-phase static coordinate system[J]. Transactions of China Electrotechnical Society, 2021, 36(1): 60-67. [17] Hu Yuansheng, Hu Cungang, Zhang Pinjia, et al A novel hybrid seven-level converter for permanent magnet synchronous motor driving system based on model predictive control[J]. China Electrotechnical Society Transactions on Electrical Machines and Systems, 2019, 3(4): 389-396. [18] Li Yu, Zhang Zhenbin, Li Kejun, et al.Predictive current control for voltage source inverters considering dead-time effect[J]. China Electrotechnical Society Transactions on Electrical Machines and Systems, 2020, 4(1): 35-42. [19] Wang Xiaohe, Sun Dan.Three-vector-based low-complexity model predictive direct power control strategy for doubly fed induction generators[J]. IEEE Transactions on Power Electronics, 2017, 32(1): 773-782. [20] Rivera M, Elizondo J, Macias M, et al.Model predictive control of a doubly fed induction generator with an iIndirect matrix converter[C]// IECON 2010-36th Annual Conference on IEEE Industrial Electronics Society, Glendale, 2010: 2959-2965. [21] 张虎, 张永昌, 杨达维. 基于双矢量模型预测直接功率控制的双馈电机并网及发电[J]. 电工技术学报, 2016, 31(5): 69-76. Zhang Hu, Zhang Yongchang, Yang Dawei.Two-vectors-based model predictive direct power control of doubly fed induction generator for grid connection and power regulation[J]. Transactions of China Electrotechnical Society, 2016, 31(5): 69-76. [22] Xu Wei, Gao Jianping, Liu Yi, et al.Model predictive current control of brushless doubly-fed machine for stand-alone power generation system[C]//IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, 2017: 322-327. [23] Li Xuan, Peng Tao, Dan Hanbing, et al.A modulated model predictive control scheme for the brushless doubly fed induction machine[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2018, 6(4): 1338-1342. [24] Wei Xinchi, Cheng Ming, Hua Wei, et al.Model predictive power control of a brushless doubly fed twin stator induction generator[C]//2017 IEEE Energy Conversion Congress and Exposition, Poland, 2017: 5080-5085. [25] Bayhan S, Kakosimos P, Rivera M.Predictive torque control of brushless doubly fed induction generator fed by a matrix converter[C]//2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering, Doha, 2018: 1-6. [26] 赵凯, 周瑞睿, 冷傲杰, 等. 一种永磁同步电机的有限集无模型容错预测控制算法[J]. 电工技术学报, 2021, 36(1): 27-38. Zhao Kaihui, Zhou Ruirui, Leng Aojie, et al.Finite control set model-free fault-tolerant predictive control for permanent magnet synchronous motor[J]. Transactions of China Electrotechnical Society, 2021, 36(1): 27-38. [27] Fliess M, Join C.Model-free control[J]. Internatioal Journal of Control, 2013, 86(12): 2228-2252. [28] Lin Chengkai, Liu Tianhua, Yu J T, et al.Model-free predictive current control for interior permanent-magnet synchronous motor drives based on current difference detection technique[J]. IEEE Transactions on Industrial Electronics, 2014, 61(2): 667-681. [29] Lin Chengkai, Yu J, Lai Y, et al.Improved model-free predictive current control for synchronous reluctance motor drives[J]. IEEE Transactions on Industrial Electronics, 2016, 63(6): 3942-3953. [30] Poza J, Oyarbide E, Roye D, et al.Unified reference frame dq model of the brushless doubly fed machine[J]. IEE Proceedings - Electric Power Applications, 2006, 153(5): 726-734. [31] Liu Yi, Ai Wu, Chen Bing, et al.Control design of the brushless doubly-fed machine for stand-alone VSCF ship shaft generator systems[J]. Journal of Power Electronics, 2016, 16(1): 259-267.
2021, Vol. 36 
