变压器杂散损耗计算中的局部表面阻抗建模方法

doi:10.19595/j.cnki.1000-6753.tces.191296

摘要
图/表
参考文献
相关文章 (11)

全文: PDF (39707 KB) HTML
输出: BibTeX | EndNote (RIS)

摘要该文基于表面阻抗理论对表面阻抗法在电力变压器导磁钢结构件（如油箱、铁心拉板等）杂散损耗计算中的实际应用展开研究。针对变压器杂散损耗工程计算中面临的多尺度、小透入深度问题带来的计算精度和计算效率不易兼顾的难题,综合考虑导磁钢构件的趋肤效应和三维杂散场分布特征,提出一种对趋肤深度区域和场量衰减区域分别进行边界条件处理的局部表面阻抗建模分析方法,实现了杂散损耗的有效计算;并以国际TEAM杂散损耗基准模型P21-B为研究对象搭建变压器杂散损耗测试系统,通过相应的实验研究和仿真分析发现,局部表面阻抗方法与常规有限元方法具有相当的计算精度,但从计算规模和计算时间角度分析,前者在保证计算精度的前提下可以显著节省计算资源,提高计算效率,具有较高的工程实用价值。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	赵志刚
	温涛

关键词 ：表面阻抗法, 杂散损耗, 漏磁场, 计算规模

Abstract：This paper studies the practical application of surface impedance method in stray loss calculation of magnetic conductive steel components of power transformer,such as oil tank,core pull plate,etc.Due to the problems of multi-scale and small penetration depth in the calculation of stray loss of transformer,it is difficult to consider both calculation accuracy and calculation efficiency.In this paper,considering the skin effect and three-dimensional stray field distribution characteristics of the magnetic steel,a local surface impedance modeling and analysis method is proposed to deal with the boundary conditions of the skin depth region and the field attenuation region respectively,which realizes the effective calculation of stray loss.Taking the international TEAM P21-B model as the research object,the stray loss measurement system of transformer is built.The experiment and simulation show that the local surface impedance method has the same calculation accuracy as the finite element method,but from the perspective of calculation scale and time,the former can greatly save computing resources and improve calculation efficiency while guaranteeing the calculation accuracy,which has high engineering practical value.

Key words： Surface impedance stray loss leakage magnetic field computation scale

收稿日期: 2019-10-08

PACS:

TM41

基金资助:国家自然科学基金项目(51677052)、省部共建电工装备可靠性与智能化国家重点实验室自主研究课题重点项目(ERIZZ2018002)资助

通讯作者: 赵志刚,男,1981年生,博士,博士生导师,主要研究方向为电工磁材料磁性能模拟与工程电磁场数值仿真及应用。E-mail:zhaozhigang@hebut.edu.cn

作者简介: 温涛,男,1993年生,硕士,主要研究方向为电工磁材料磁性能模拟与工程电磁场数值仿真及应用。E-mail:401362719@qq.com

引用本文:

赵志刚, 温涛. 变压器杂散损耗计算中的局部表面阻抗建模方法[J]. 电工技术学报, 2020, 35(22): 4699-4708. Zhao Zhigang, Wen Tao. Calculation Method of Stray Loss Based on Local Surface Impedance Boundary Modeling Method. Transactions of China Electrotechnical Society, 2020, 35(22): 4699-4708.

链接本文:

https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.191296 https://dgjsxb.ces-transaction.com/CN/Y2020/V35/I22/4699

[1] 潘超,王格万,蔡国伟,等.交直流混杂模式下变压器励磁电流谐波与箱体损耗映射研究[J].电工技术学报,2019,34(13):2830-2838.
Pan Chao,Wang Gewan,Cai Guowei,et al.Study on the mapping between the excitation current harmonic of transformer and the box loss under the AC-DC hybrid mode[J].Transactions of China Electro- technical Society,2019,34(13):2830-2838.
[2] 张荣伦,王帅,穆海宝,等.大型电力变压器损耗带电测试技术研究[J].电工技术学报,2019,34(4):51-60.
Zhang Ronglun,Wang Shuai,Mu Haibao,et al.Research on live loss measurement technology of large power transformers[J].Transactions of China Electrotechnical Society,2019,34(4):51-60.
[3] 刘振亚,张启平,董存,等.通过特高压直流实现大型能源基地风、光、火电力大规模高效率安全外送研究[J].中国电机工程学报,2014,34(16):2513-2522.
Liu Zhenya,Zhang Qiping,Dong Cun,et al.Research on large-scale,efficient and safe delivery of wind,light and thermal power to large-scale energy bases through UHVDC[J].Proceedings of the CSEE,2014,34(16):2513-2522.
[4] 王建民,单志英,韩莹,等.换流变压器两种屏蔽结构对漏磁及附加损耗影响的仿真研究[J].变压器,2018,55(4):15-19.
Wang Jianmin,Shan Zhiying,Han Ying,et al.Simulation study on the effect of two shielding structures of converter transformer on magnetic flux leakage and additional loss[J].Transformer,2018,55(4):15-19.
[5] 程志光,刘涛,范亚娜,等.基于TEAM P21三维杂散场问题建模仿真与验证[J].电工技术学报,2014,29(9):194-203.
Cheng Zhiguang,Liu Tao,Fan Yana,et al.Modeling,simulation and validation of three-dimensional stray field problem based on TEAM P21[J].Transactions of China Electrotechnical Society,2014,29(9):194-203.
[6] 张宁,李琳,魏晓光.非正弦激励下磁心损耗的计算方法及实验验证[J].电工技术学报,2016,31(17):224-232.
Zhang Ning,Li Lin,Wei Xiaoguang.Calculating method and experimental verification of core loss under non-sinusoidal excitation[J].Transactions of China Electrotechnical Society,2016,31(17):224-232.
[7] 王晓远,高鹏.等效热网络法和有限元法在轮毂电机温度场计算中的应用[J].电工技术学报,2016,31(16):26-33.
Wang Xiaoyuan,Gao Peng.Application of equivalent thermal network method and finite element method in temperature field calculation of hub motor[J].Transactions of China Electrotechnical Society,2016,31(16):26-33.
[8] 李亚丽,凌跃胜,刘宏勋,等.高频变压器涡流损耗公式的推导及有限元方法的验证[J].电工技术学报,2015,30(增刊2):82-87.
Li Yali,Ling Yuesheng,Liu Hongxun,et al.Derivation of eddy current loss formula for high frequency transformer and verification of finite element method[J].Transactions of China Electro- technical Society,2015,30(S2):82-87.
[9] 周剑明.电磁场有限元综合模拟方法及大刑变压器漏磁场的研究[D].武汉:华中理工大学,1990.
[10] 刘刚,孙立鹏,王雪刚,等.正弦及谐波激励下的铁心损耗计算方法改进及仿真应用[J].电工技术学报,2018,33(21):4909-4918.
Liu Gang,Sun Lipeng,Wang Xuegang,et al.Improvement and simulation application of core loss calculation method under sinusoidal and harmonic excitation[J].Transactions of China Electrotechnical Society,2018,33(21):4909-4918.
[11] 鲍晓华,张程,胡云鹏.空心电抗器的复合被动屏蔽结构的电磁性能分析[J].电工技术学报,2016,31(增刊1):68-75.
Bao Xiaohua,Zhang Cheng,Hu Yunpeng.Electro- magnetic performance analysis of compound passive shielding structure of hollow reactor[J].Transactions of China Electrotechnical Society,2016,31(S1):68-75.
[12] 刘华,刘锐,付洋洋,等.基于阻抗边界法的换流变压器箱壳谐波损耗计算[J].高电压技术,2015,41(9):3171-3176.
Liu Hua,Liu Rui,Fu Yangyang,et al.Harmonic loss calculation of converter transformer case based on impedance boundary method[J].High Voltage Engin- eering,2015,41(9):3171-3176.
[13] Milagre A M,Ferreira da Luz M V,Cangane G M,et al.3D calculation and modeling of eddy current losses in a large power transformer[C]//IEEE Inter- national Conference on Electrical Machines,Marseille,France,2012,DOI:10.1109/ICElMach.2012.6350200.
[14] Li Mo,Shen Zejun,Zou Jun,et al.Applicability of the standard impedance boundary condition in the calculation of 3D eddy current loss in condu- ctors[C]//IEEE Sixth International Conference on Electromagnetic Field Problems and Applications,Dalian,China,2012,DOI:10.1109/ICEF.2012.6310417.
[15] 姜宇琦,林育艺.电力变压器铁芯夹件涡流损耗计算[J].电工技术,2017(8):25-26.
Jiang Yuqi,Lin Yuyi.Calculation of eddy current loss of iron core sandwich of power transformer[J].Electrical Engineering,2017(8):25-26.
[16] Schelkunoff S A.The impedance concept and its application to problems of reflection,shielding and power absorption[J].Bell System Technical Journal,1938,17(1):17-48.
[17] Deeley E M.Surface impedance near edges and corners in three-dimensional media[J].IEEE Transa- ctions on Magnetics,1990,26(2):712-714.
[18] 谢德馨.三维涡流场的有限元分析[M].北京:机械工业出版社,2007.
[19] Li Yan,Eerhemubayaer,Sun Xin,et al.Calculation and analysis of 3-D nonlinear eddy current field and structure losses in transformer[C]//International Conference on Electrical Machines and Systems,Beijing,China,2011:1-5.
[20] Guerin C,Meunier G,Tanneau G.Surface impedance for 3D nonlinear eddy current problems-application to loss computation in transformers[J].IEEE Transa- ctions on Magnetics,1996,32(3):808-811.
[21] Schelkunoff S A.The impedance concept and its application to problems of reflection,refraction,shielding and power absorption[J].Bell Labs Technical Journal,2013,17(1):17-48.
[22] 李龙女,李岩,井永腾,等.电力变压器漏磁场与杂散损耗计算的研究[J].电工技术学报,2013,28(增刊2):122-127.
Li Longnu,Li Yan,Jing Yongteng,et al.Study on calculation of leakage magnetic field and stray loss of power transformer[J].Transactions of China Electro- technical Society,2013,28(S2):122-127.
[23] 孟凡辉.多谐波激励条件下构件损耗的模拟与验证[D].保定:华北电力大学,2017.
[24] 刘涛,刘兰荣,张俊杰,等.基于TEAM P21基准模型的杂散损耗测量方法研究与验证[J].电力科学与工程,2017,33(12):61-66.
Liu Tao,Liu Lanrong,Zhang Junjie,et al.Research and verification of stray loss measurement method based on TEAM P21 benchmark model[J].Electric Power Science and Engineering,2017,33(12):61-66.