Three-Vector Model Predictive Current Control Strategy for Permanent Magnet Synchronous Motor Drives with Parameter Error Compensation
Qin Yanzhong1, Yan Yan1, Chen Wei1, Geng Qiang2
1. School of Electrical and Information Engineering Tianjin University Tianjin 300072 China; 2. Tianjin Engineering Center of Electric Machine System Design and Control Tianjin Polytechnic University Tianjin 300387 China
Abstract:The operating performance of permanent magnet synchronous motor current control strategy depends heavily on the motor parameters. The parameters of the permanent magnet synchronous motor will change due to the factors such as temperature rise and magnetic saturation. If the predictive current control is performed with the mismatched motor parameters, the current prediction value will be inaccurate and the optimal vector will be misjudged, resulting in the degradation of system control performance. In this paper, the performance degradation of the control strategy caused by the change of motor parameters is studied. The error models of delay compensation, current prediction, and vector dwell time are established respectively. The source and the transmission relationship of each link error are analyzed. On this basis, the three-vector model predictive current control strategy for permanent magnet synchronous motor drives with parameter error compensation is proposed. Taking a 6kW permanent magnet synchronous motor as the control object, the experimental results verify the feasibility and effectiveness of the proposed strategy.
秦艳忠, 阎彦, 陈炜, 耿强. 永磁同步电机参数误差补偿-三矢量模型预测电流控制[J]. 电工技术学报, 2020, 35(2): 255-265.
Qin Yanzhong, Yan Yan, Chen Wei, Geng Qiang. Three-Vector Model Predictive Current Control Strategy for Permanent Magnet Synchronous Motor Drives with Parameter Error Compensation. Transactions of China Electrotechnical Society, 2020, 35(2): 255-265.
[1] Morel F, Lin Shi Xuefang, Retif J M, et al.A comparative study of predictive current control schemes for a permanent-magnet synchronous machine drive[J]. IEEE Transactions on Industrial Electronics, 2009, 56(7): 2715-2728. [2] Zhang Yongchang, Zhu Jianguo.A simple method to reduce torque ripple in direct torque-controlled permanent magnet synchronous motor by using vectors with variable amplitude and angle[J]. IEEE Transactions on Industrial Electronics, 2011, 58(7): 2848-2859. [3] Zhang Yongchang, Zhu Jianguo.A novel duty cycle control strategy to reduce both torque and flux ripples for DTC of permanent magnet synchronous motor drives with switching frequency reduction[J]. IEEE Transactions on Power Electronics, 2011, 26(10): 3055-3067. [4] 徐艳平, 张保程, 周钦. 永磁同步电机双矢量模型预测电流控制[J]. 电工技术学报, 2017, 32(20): 222-230. Xu Yanping, Zhang Baocheng, Zhou Qin.Two-vector model predictive current control of permanent magnet synchronous motor[J]. Transactions of China Electrotechnical Society, 2017, 32(20): 222-230. [5] 徐艳平, 王极兵, 张保程, 等. 永磁同步电机三矢量模型预测电流控制[J]. 电工技术学报, 2018, 33(5): 980-988. Xu Yanping, Wang Jibing, Zhang Baocheng, et al.Three vector model predictive current control of permanent magnet synchronous motor[J]. Transa- ctions of China Electrotechnical Society, 2018, 33(5): 980-988. [6] 张永昌, 杨海涛, 魏香龙. 基于快速矢量选择的永磁同步电机模型预测控制[J]. 电工技术学报, 2016, 31(6): 66-73. Zhang Yongchang, Yang Haitao, Wei Xianglong.Predictive control of permanent magnet synchronous motor model based on fast vector selection[J]. Transactions of China Electrotechnical Society, 2016, 31(6): 66-73. [7] Nguyen H T, Jung J W.Finite control set model predictive control to guarantee stability and robustness for surface-mounted PM synchronous motors[J]. IEEE Transactions on Industrial Elec- tronics, 2018, 65(11): 8510-8519. [8] 史婷娜, 刘华, 陈炜. 考虑逆变器非线性因素的表贴式永磁同步电机参数辨识[J]. 电工技术学报, 2017, 32(7): 77-83. Shi Tingna, Liu hua, Chen Wei. Parameter identi- fication of surface mount permanent magnet synchronous motor considering nonlinear factors of inverter[J]. Transactions of China Electrotechnical Society, 2017, 32(7): 77-83. [9] 涂文聪, 骆光照. 基于模糊动态代价函数的永磁同步电机有限控制集模型预测电流控制[J]. 电工技术学报, 2017, 32(16): 89-97. Tu Wencong, Luo Guangzhao.Finite-control-set model predictive current control for permanent magnet synchronous motor based on dynamic cost function using fuzzy method[J]. Transactions of China Electrotechnical Society, 2017, 32(16): 89-97. [10] Zhang R, Luo G, Tu W, et al.Grey control strategy of predictive current for PMSM[C]//IEEE Conference on Industrial Electronics and Applications, Hefei, China, 2016: 2386-2390. [11] Stumper J F, Kuehl S, Kennel R.Predictive torque control for AC drives: Improvement of parametric robustness using two degree of freedom control[C]// IEEE Energy Conversion Congress and Exposition, Denver, CO, USA, 2013: 1170-1175. [12] Siami M, Khaburi D A, Abbaszadeh A, et al.Robustness improvement of predictive current control using prediction error correction for permanent magnet synchronous machines[J]. IEEE Transactions on Industrial Electronics, 2016, 63(6): 3458-3466. [13] Zhang Changfan, Wu Gongping, Rong Fei, et al.Robust fault-tolerant predictive current control for permanent magnet synchronous motors considering demagnetization fault[J]. IEEE Transactions on Industrial Electronics, 2018, 65(7): 5324-5334. [14] 张永昌, 高素雨. 考虑延时补偿的永磁同步电机电流预测控制[J]. 电气工程学报, 2016, 11(3): 13-20. Zhang Yongchang, Gao Suyu.Current predictive control of permanent magnet synchronous motor considering delay compensation[J]. Journal of Elec- trical Engineering, 2016, 11(3): 13-20.