触头片结构对新型带铁心的杯状纵磁真空灭弧室磁场影响仿真

doi:10.19595/j.cnki.1000-6753.tces.170700

摘要
图/表
参考文献
相关文章 (7)

全文: PDF (25584 KB)
输出: BibTeX | EndNote (RIS)

摘要

真空灭弧室触头的结构设计对其内部电磁场分布具有重要的影响作用。为了研究触头片结构设计对一种新型带铁心的杯状纵磁真空灭弧室内电磁场分布情况的影响,该文采用了Ansoft Maxwell软件对该新型真空灭弧室内电磁场进行仿真分析,得到了触头片的开槽长度、开槽偏转角度、触头片中心工艺孔直径及孔的深度对磁场分布的影响;实现了在电流峰值时和电流过零时的磁感应强度的云图分布。仿真结果表明：触头片开槽长度、偏角和中心工艺孔径对磁场分布影响较大,孔径深度几乎不影响磁场分布;触头片开槽长度和中心工艺孔径的增加均可减少磁感应强度;触头片开槽偏转角度的增加会使电流峰值时及电流过零时磁场强度呈增加趋势,但存在一个最优角度为25°;触头片开槽和中心开工艺孔等操作均能减少电流过零时的剩余磁场强度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	董华军
	司明月
	郭英杰
	李春晓
	郭方准

关键词 ：真空灭弧室, 触头片结构, 电磁场分布, 磁感应强度

Abstract：

Design of the contacts structure in the vacuum interrupter has an important influence on their internal electromagnetic field distribution. In order to do researches on the influence of contact plates structure on the electromagnetic field distribution, a new type of cup-shaped axial magnetic field (AMF) vacuum interrupter with iron core is used. In this study, Ansoft Maxwell software is adopted to simulate the electromagnetic field characteristics in the new vacuum interrupter. Influences of slot length, the slot deflection angle, the diameter of the center hole of contact plates, and the depth of the hole on the magnetic field distribution are got by utilizing the software . Besides, Magnetic induction intensity distribution at the time of peak current and over zero current are obtained. From the results we can see: The slot length, deflection angle and the center process aperture of contact plate have much influence on the magnetic field distribution while the aperture depth has little influence on the magnetic field distribution. The length of the slot and the increase of the center process aperture can reduce the magnetic induction intensity distribution. The increase of the slot deflection angle of the contact plate will increase the current intensity at the time of current peak and the current zero crossing, and the optimal angle is 25°. The contact plate slot and center open hole can reduce the residual magnetic field strength when the current is zero.

Key words： Vacuum interrupter contact plate geometry electromagnetic field distribution magnetic induction

收稿日期: 2017-05-24 出版日期: 2018-06-13

PACS:

TM561

基金资助:

国家自然科学基金项目（51207016,51477023）、辽宁省教育厅项目（JDL2017032）和辽宁省高等学校优秀人才项目（LJQ2014046）资助

通讯作者: 董华军男,1978年生,副教授,硕士生导师,研究方向为真空开关电弧基础理论、图像处理及识别。E-mail：huajundong4025@163.com

作者简介: 司明月男,1991年生,硕士研究生,研究方向为真空开关基础理论。E-mail：qqsimingyue @sina.com

引用本文:

董华军, 司明月, 郭英杰, 李春晓, 郭方准. 触头片结构对新型带铁心的杯状纵磁真空灭弧室磁场影响仿真[J]. 电工技术学报, 2018, 33(11): 2448-2455. Dong Huajun, Si Mingyue, Yingjie, Li Chunxiao, Guo Fangzhun. Influence of Contact Plate Structure on Magnetic Field Strength of a New Type of Cup-Shaped Axial Magnetic Field Vacuum Interrupter with Iron Core. Transactions of China Electrotechnical Society, 2018, 33(11): 2448-2455.

链接本文:

https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.170700 https://dgjsxb.ces-transaction.com/CN/Y2018/V33/I11/2448

[1] 杨丽君, 黄加佳, 许佐明, 等. 高压交流套管的油纸绝缘热老化特性及寿命模型研究[J]. 电工技术学报, 2016, 31(5): 144-151.
Yang Lijun, Huang Jiajia, XuZuoming, et al. Investigation on thermal aging characteristics and lifetime model of oil-paper insulation for HV AC bushing[J]. Transactions of China Electrotechnical Society, 2016, 31(5): 144-151.
[2] 唐炬, 潘成, 王邸博, 等. 高压直流绝缘材料表面电荷积聚研究进展[J]. 电工技术学报, 2017, 32(8): 10-21.
Tang Ju, Pan Cheng, Wang Dibo, et al.Development of studies about surface charge accumulation on insulating material under HVDC[J]. Transactions of China Electrotechnical Society, 2017, 32(8): 10-21.
[3] 肖湘宁, 李伟, 罗超, 等. 特高压直流孤岛运行特性与稳定控制研究综述[J]. 电工技术学报, 2017, 32(10): 1-11.
Xiao Xiangning, Li Wei, Luo Chao, et al.Survey on operational characteristics and stability control of ultra-HVDC transmission system in islanded mode[J]. Transactions of China Electrotechnical Society, 2017, 32(10): 1-11.
[4] 董华军, 杨海军, 郭英杰, 等. 一种具有横纵磁场的新型真空灭弧室触头三维磁场仿真[J]. 电工技术学报, 2015, 30(5): 112-113.
Dong Huajun, Yang Haijun, GuoYingjie, et al. 3-D magnetic field simulation of a new-type contact with TMF-AMF for vacuum interrupters[J]. Transactions of China Electrotechnical Society, 2015, 30(5): 112-113.
[5] 刘斌, 武建文. 直流真空电弧强迫开断电弧形态[J]. 电工技术学报, 2016, 31(24): 157-163.
Liu Bin, Wu Jianwen.Morphology of forcing interruption arc of DC vacuum arc[J]. Transactions of China Electrotechnical Society, 2016, 31(24): 157-163.
[6] 蒋西平, 廖敏夫, 赵岩, 等. 平板电极型激光触发真空开关的导通特性研究[J].电工技术学报, 2016, 31(23): 150-158.
Jiang Xiping, Liao Minfu, Zhao Yan, et al.Research on conduction characteristics of plate electrode type laser triggered vacuum switch[J]. Transactions of China Electrotechnical Society, 2016, 31(23): 150-158.
[7] 赵岩, 段雄英, 廖敏夫, 等. 基于高频振荡回路的激光触发真空开关开断特性[J]. 电工技术学报, 2016, 31(21): 183-187.
Zhao Yan, DuanXiongying, Liao Minfu, et al. The interrupt characteristics of laser triggered vacuum switch in circuits with high oscillating frequency[J]. Transactions of China Electrotechnical Society, 2016, 31(21): 183-187.
[8] 王素华, 彭向阳, 韩潇, 等. 变电站直流电源系统改造问题分析[J]. 电力系统保护与控制, 2010, 38(17): 179-182.
Wang Suhua, PengXiangyang, Han Xiao, et al. Analysis of DC power system retrofit for substation[J]. Power System Protection and Control, 2010, 38(17): 179-182.
[9] 王仲奕, 刘志远, 张炫, 等. 五种纵向磁场真空灭弧室触头磁场特性分析比较[J]. 电工电能新技术, 2006, 25(1): 21-25.
Wang Zhongyi, Liu Zhiyuan, Zhang Xuan, et al.Comparison of axial magnetic field characteristics of 5 axial magnetic field vacuum interrupter contacts[J]. Advanced Technology of Electrical Engineering and Energy, 2006, 25(1): 21-25.
[10] 刘志远, 胡亚平, 王季梅, 等. 铁心式杯状纵磁真空灭弧室触头磁场特性[J]. 电工技术学报, 2006, 21(7): 81-88, 98.
Liu Zhiyuan, Hu Yaping, Wang Jimei, et al.Axial magnetic field of a new cup type axial magnetic field vacuum interrupter contact with iron plates[J]. Transactions of China Electrotechnical Society, 2006, 21(7): 81-88, 98.
[11] 谢菲, 叶兆平, 修士新. 触头片开槽方式对杯状纵磁触头磁场特性的影响[C]//输变电年会2010论文集, 2010: 35-41.
[12] 庞先海, 景皓, 修士新, 等. 真空灭弧室杯状纵向磁场触头的仿真分析[C]//2014年江西省电机工程学会年会论文集, 2014: 268-273.
[13] 薛从军. 具有凹状纵向磁场分布的真空灭弧室触头设计研究[D]. 沈阳: 沈阳工业大学, 2013.
[14] 胡楚联. 24kV杯状纵磁真空灭弧室设计[D]. 沈阳: 沈阳工业大学, 2011.
[15] 孙鹏, 邵淑文. 新型真空灭弧室1/3匝线圏纵磁触头三维磁场仿真[J]. 髙压电器, 2010, 46(6): 60-63.
Sun Peng, Shao Shuwen.3-D magnetic filed simulation of a novel axial magnetic field contact for vacuum interrupter[J]. High Voltage Apparatus, 2010, 46(6): 60-63.
[16] Ghafourian S M, Arana I, Holbøll J, et al.General analysis of vacuum circuit breaker switching overvoltages in offshore wind farms[J]. IEEE Transactions on Power Delivery, 2016, 31(5): 2351-2359.
[17] Pavelescu D,Nitu S,Dumitrescu G,et al.Post-arc current in low-voltage vacuum circuit breaker: Measurements and physical peculiarities[J]. IEEE Transactions on Plasma Science, 2003, 31(5): 869-876.
[18] Kawase Y, Inoue H, Ota T, et al.Numerical analysis of axial magnetic field acting on the arc in vacuum circuit breakers by 3-D finite element method taking into account eddy currents[J]. IEEE Transactions on Magnetics, 2002, 34(5): 2668-2671.
[19] 刘艳, 陈丽安. 基于SOM的真空断路器机械故障诊断[J]. 电工技术学报, 2017, 32(5): 49-54.
Liu Yan, Chen Lian.Mechanical fault diagnosis of vacuum circuit breaker based on SOM[J]. Transactions of China Electrotechnical Society, 2017, 32(5): 49-54.
[20] 葛国伟, 廖敏夫, 黄金强, 等. 双断口真空断路器配合特性仿真与试验[J]. 电工技术学报, 2016, 31(22): 57-65.
GeGuowei, Liao Minfu, Huang Jinqiang, et al. Simulation and experimental of matching characteristics of vacuum circuit breakers with double-break[J]. Transactions of China Electrotechnical Society, 2016, 31(22): 57-65.
[21] 杨海军. 一种新型杯状纵磁真空灭弧室设计及电磁场仿真[D]. 大连: 大连交通大学, 2015.
[22] Fenski B, Lindmayer M.Vacuum interrupters with axial field contacts 3D finite element simulation and switching experiment[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 1997, 4(4): 407-412.