Abstract:In this paper, a kind of new type of magnetic resistance brushless doubly-fed motor rotor structure is introduced to the design of rotor structure which is designed based on the magnetic resistance structure combined with wound rotor type structure. This rotor structure has kept the flexibility of connection mode of the wound rotor winding, and played the oriented functions of reluctance rotor flux, improving the effect of magnetic field modulation, It can realize commendably to maximize coupling ability of two sets of rotor and stator winding. It has been analyzed detailly of the design principle and method of the structure of a new type of reluctance rotor brushless doubly-fed motor in this paper, as a case study of a 30kW·A prototype showed that the power distribution curve, the air gap flux density curve and motor efficiency of the new type of magnetic resistance of brushless doubly-fed motor, and contrasted with the structure of the magnetic barrier and magnetic resistance,adding the cage of reluctance rotor brushless doubly-fed motor output power in the same conditions. Finally,the dynamic performance of the prototype of the brushless doubly-fed generation system has been tested. The experimental results shown that the new type of magnetic resistance brushless doubly-fed motor which is designed by this manner has achieved excellent performances.
[1] Dorrell D G, Knight A M, Betz R E. Improvements in brushless doubly fed reluctance generators using high-flux-density steels and selection of the correct pole numbers[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4092-4095. [2] Xu L, Guan B, Liu H, et al. Design and control of a high-efficiency doubly-fed brushless machine for wind power generator application[C]//Energy Conversion Congress and Exposition, Atlanta, USA, 2010, 1: 2409-2416 [3] 王雪帆. 一种转子绕组采用变极法设计的新型无刷双馈电机[J]. 中国电机工程学报, 2003, 23(6): 108- 111. Wang Xuefan. A new brushless doubly-fed machine with a wound-rotor changing-pole winding[J]. Proceedings of the CSEE, 2003, 23(6): 108-111. [4] Mousa M G, Allam S M, Rashad E M. A sensorless scalar-control strategy for maximum power tracking of a grid-connected wind-driven brushless doubly-fed reluctance generator[C]//The 4th Electric Power and Energy Conversion Systems(EPECS), Sharjah, 2015: 1-6. [5] 卞松江, 贺益康, 潘再平. 级联式无刷双馈电机的建模与仿真[J].中国电机工程学报, 2001, 21(12): 33-37. Bian Songjiang, He Yikang, Pan Zaiping. Modeling and simulation of the cascade brushless doubly-fed machine[J]. Proceedings of the CSEE, 2001, 21(12): 33-37. [6] Roberts P C, McMahon R A. Performance of BDFM as generator and motor[J]. IEE Proceedings of Electric Power Applications, 2006, 153(2): 289-299. [7] 张岳, 王凤翔, 邢军强, 等. 磁障转子无刷双馈电机[J]. 电工技术学报, 2012, 27(7): 49-54. Zhang Yue, Wang Fengxiang, Xing Junqiang, et al. Brushless doubly-fed machines with magnetic barrier rotor[J]. Transactions of China Electrotechnical Society, 2012, 27(7): 49-54. [8] McMahon R A, Roberts P C, Wang X, et al. Performance of BDFM as generator and motor[J]. IEE Proceedings on Electric Power Applications, 2006, 153(2): 289-299. [9] 阚超豪, 王雪帆. 绕线式转子绕组的谐波分析[J]. 大电机技术, 2007(4): 18-23. Kan Chaohao, Wang Xuefan. Harmonic anslysis for wound-rotor winding in induction manchine[J]. Large Electric Manchine and Hydraulic Turbine, 2007(4): 18-23. [10] Boger M, Wallace A K, Spee R. Investigation of appropriate pole number combinations for brushless doubly fed machines as applied to pump drives[J]. IEEE Transactions on Industrial Application, 1996, 31(5): 1022-1028. [11] Kan Chaohao, Wang Xuefan, Xiong Fei, et al. Design optimization of tooth-harmonic brushless doubly-fed machine[C]//International Conference on Electrical Machines and Systems, Wuhan, China, 2008: 4272- 4276. [12] 张凤阁, 王凤翔, 王正. 不同转子结构无刷双馈电机稳态运行特性的对比试验研究[J]. 中国电机工程学, 2002, 22(4): 52-55. Zhang Fengge, Wang Fengxiang, Wang Zheng. Comparative experiment study on the performance of doubly-fed[J]. Proceedings of the CSEE, 2002, 22(4): 52-55. [13] Jin Shi, Zhang Fengge. Speed sensorless control for brushless doubly-fed generator based on fuzzy logic[C]// 2011 International Conference on Electrical Machines and Systems, Beijing, China, 2011: 1-5. [14] Hsieh M F, Lin I H, Hsu Y C, et al. Design of brushless doubly-fed machines based on magnetic circuit modeling[J]. IEEE Transactions on Magnetic, 2012, 48(11): 3017-3020. [15] Brune C S, Spee R, Wallace A K. Experimental evaluation of a variable-speed, doubly-fed wind-power generation system[J]. Industry Applications Society Meeting, 1993, 30(3): 480-487. [16] McMahon R A, Abdi E, Malliband P D, et al. Design and testing of a 250kW medium-speed brushless DFIG[C]//The 6th IET International Conference on Power Electronics, Machines and Drives, Bristol, UK, 2012: 1-6. [17] Abdi S,Abdi E,Oraee A,et al. Equivalent circuit parameters for large brushless doubly fed machines (BDFMs)[J]. IEEE Transactions on Energy Conversion, 2014, 29(3): 706-715. [18] 许实章. 交流电机的绕组理论[M]. 北京: 机械工业出版社, 1985. [19] 王雪帆. 一种新型无刷双馈电机: 中国, 2007- 10051868.1[P]. 2007.