交流电阻及其时间常数的准平衡式电桥精密测量技术

doi:10.19595/j.cnki.1000-6753.tces.160470

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1778 KB)
输出: BibTeX | EndNote (RIS)

摘要研究了一种基于准平衡式电桥的交流电阻及其时间常数精密测量方法。电桥以双级感应分压器为比例参考标准,利用电子线路将电桥不平衡差值电压转移至变压器绕组,自动实现电桥准平衡状态,消除了感应分压器比例绕组内负载的影响。将数字同步采样测量方法应用于阻抗测量,实现了交流小电压复数比的准确测量。采用电子式引线电压补偿技术和开尔文网络消除了小电阻测量时串联导线的影响。研制的交流电阻及其时间常数测量装置可测量1～10 000 Ω范围内交流电阻,测量频率为1 kHz时实验结果表明,测量装置具有较高的准确度和稳定性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	冯建
	来磊
	石雷兵
	孙健

Abstract：The method of precision measurement of AC resistance and time constant based on a kind of quasi-balance resistance bridge is studied. A two-stage inductive voltage divider is used as the ratio reference of the bridge. The unbalanced bridge voltage is transferred to winding of a transformer by electronic circuits, realizing the quasi-balance status automatically of the bridge. The quasi-balance state also makes the voltage ratio of inductive voltage divider unaffected by internal loading of ratio winding. The digital synchronous sampling method is used to measure the small complex voltage ratio. To reduce influence of lead wire connecting two resistors when measuring small resistors, amplifiers are used to eliminate voltage drop on the wire together with a Kelvin network. The measurement system designed in this paper can measure resistance from 1 Ω to 10 000 Ω. Experimental results at frequency of 1 kHz show that the measurement system deserves high accuracy and stability.

Key words： Quasi-balance bridge AC resistance time constant synchronous sampling

收稿日期: 2016-04-07 出版日期: 2017-10-25

PACS:

TM933

作者简介: 冯建男,1986年生,硕士研究生,研究方向为交流阻抗和交流功率精密测量技术。E-mail:fengjian0513@126.com(通信作者)来磊女,1970年生,高级工程师,研究方向为交流阻抗精密测量和新能源计量技术。E-mail:lail@simt.com.cn

引用本文:

冯建,来磊,石雷兵,孙健. 交流电阻及其时间常数的准平衡式电桥精密测量技术[J]. 电工技术学报, 2017, 32(19): 187-192. Feng Jian, Lai Lei, Shi Leibing , Sun Jian. Precision Measurement of AC Resistance and Time Constant Based onQuasi-Balance Resistance Bridge. Transactions of China Electrotechnical Society, 2017, 32(19): 187-192.

链接本文:

https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.160470 https://dgjsxb.ces-transaction.com/CN/Y2017/V32/I19/187

[1] Domae A, Kumagai M, Zama M, et al. AC characterization of a 1 kΩ metal-foil resistor[C]//Conference on Precision Electromagnetic Measurements, 2014: 100-101.
[2] 李夏青, 王奎鹃. 直流牵引供电网暂态电路模型与参数分析[J]. 电工技术学报, 2014, 29(12): 166-172.
Li Xiaqing, Wang Kuijuan.Analysis of transient equivalent circuit model and parameters on DC traction power supply network[J]. Transactions of China Electrotechnical Society, 2014, 29(12): 166-172.
[3] 王海涛, 王景芹, 朱艳彩. Bi对AgSnO₂触头材料接触电阻的影响[J]. 电工技术学报, 2014, 29(5): 265-270.
Wang Haitao, Wang Jingqin, Zhu Yancai.Influence of Bi to AgSnO₂ material′s contact resistance[J]. Transactions of China Electrotechnical Society, 2014, 29(5): 265-270.
[4] 张青山, 段建东, 叶兵, 等. 基于电接触元件暂态热路建模的接触电阻测量研究[J]. 电力系统保护与控制, 2014, 42(15): 27-33.
Zhang Qingshan, Duan Jiandong, Ye Bing, et al.Research of measuring contact resistance based on the electrical contact transient thermal circuit model[J]. Power System Protection and Control, 2014, 42(15):27-33.
[5] Pan Xianlin, Zhang Jiangtao. A coaxial time constant standard for the determination of phase angle errors of current shunts[J]. IEEE Transactions on Instrumment & Measure, 2013, 62(1): 199-204.
[6] 方春恩, 李伟, 王佳颖, 等. 基于电阻分压的10 kV电子式电压互感器[J]. 电工技术学报, 2007, 22(5): 58-63.
Fang Chun′en, Li Wei, Wang Jiaying, et al. 10 kV electronic voltage transformer based on resistor divider[J]. Transactions of China Electrotechnical Society, 2007, 22(5): 58-63.
[7] 任万滨, 武建, 陈宇, 等. 电触点材料接触电阻高精密测量技术[J]. 电工技术学报, 2014, 29(1): 31-36.
Ren Wanbin, Wu Jian, Chen Yu, et al. Precision measuring technique for contact resistance of contact materials[J]. Transactions of China Electrotechnical Society, 2014, 29(1): 31-36.
[8] 黄璐, 张钟华, 赵伟, 等. 精密宽频开尔文电桥的研制[J]. 计量学报, 2008, 29(2): 97-101.
Huang Lu, Zhang Zhonghua, Zhao Wei, et al. Development of a wide-range AC Kelvin bridge[J]. ACTA Metrologica Sinica, 2008, 29(2): 97-101.
[9] 唐统一, 顾景福, 张钟华, 等. 交流电桥[M]. 北京:机械工业出版社, 1991.
[10]Domae A, Sakamoto N, Kiryu S, et al. Development of 7.75 ratio voltage divider toward a precise measurement of decade resistance based on the AC quantized Hall resistance[J]. IEEE Transactions on Instrumment & Measure, 2015, 64(6): 1588-1595.
[11]Kibble B P, Rayner G H. Coaxial AC bridges[M]. Bristol, U.K.: AdamHilger, 1984.
[12]Eddy S O, Moore W J M. A direct-reading AC comparator bridge for resistance measurement at power frequencies[J]. IEEE Transactions on Instrumment & Measure, 1980, 29(4): 364-366.
[13]Giblin S P, Williams J M. Automation of a coaxial bridge for calibration of AC resistors[J]. IEEE Transactions on Instrumment & Measure, 2007, 56(2): 373-377.
[14]Lai Lei, Feng Jian, Shi Leibing. Quasi-balance resistance bridge[C]//Conference on Precision Electromagnetic Measurements, 2014: 472-473.
[15]Lai Lei, Feng Jian, Shi Leibing. Quasi-balance four-terminal resistance bridge[J]. IEEE Transactions on Instrumment & Measure, 2015, 64(6): 1636-1641.
[16]Lu Zuliang. An error estimate for quasi-integer-period sampling and an approach for improving its accuracy[J]. IEEE Transactions on Instrumment & Measure,1988, 37(2): 219-222.
[17]陆祖良, 王磊, 李敏. 通过采样测量技术建立相角基准的探讨[J]. 计量学报, 2007, 28(1): 1-4.
Lu Zuliang, Wang Lei, Li Min. A Study on the establishment of phase angle primary standard by sampling measurement[J]. ACTA Metrologica Sinica, 2007, 28(1): 1-4.