Abstract：Due to the particularity of its own structure, matrix converter is vulnerable to the abnormal power supply of input side. In this paper, the equivalent mathematical model of the system is established under grid failures according to short circuit grounding faults. A new switch control strategy is proposed. This strategy ensures the security of matrix converter through the control signals of 9 groups of bidirectional switches being given respectively in different time under grid faults. The working conditions of matrix converter under normal and abnormal states of grid are simulated in Matlab/Simulink. Then DSP and FPGA algorithms are designed respectively in C language and VHDL to perform the proposed control strategy. Finally, a highly integrated experimental platform of matrix converter has been developed to verify the proposed switching control strategy. It is shown that the control strategy can not only make the speed control system have good static and dynamic performances, but also simulate the various conditions of matrix converter correctly under normal or abnormal grid operations. That is to say the matrix converter-induction motor direct torque control system has the capability of crossing grid faults.
郭有贵, 黄松涛, 王震, 邓文浪, 李利娟. 矩阵变换器直接转矩控制系统的电网故障跨越能力[J]. 电工技术学报, 2017, 32(16): 203-211.
Guo Yougui, Huang Songtao, Wang Zhen, Deng Wenlang, Li Lijuan. Crossing Ability of Grid Faults for Matrix Converter Direct Torque Control System. Transactions of China Electrotechnical Society, 2017, 32(16): 203-211.
[1] Wheeler P W, Rodriguez J, Clare J C, et al. Matrix converter: a technology review[J]. IEEE Transa- ctionson Industrial Electronics, 2002, 49(2): 276-288. [2] Huber L, Borojevic D. Space vectormodulated threephaseto three-phase matrix converter with input power factor correction[J]. IEEE Transactions on Industry Applications, 1995, 31(6): 1234-1246. [3] Xia Changliang, Zhao Jiaxin, Shi Tingna. A novel direct torque control of matrix converter-fed PMSM drives using duty cycle control for torque ripple reduction[J]. IEEE Transactions on Industrial Elec- tronics, 2014, 61(6): 2700-2712. [4] 秦显慧, 周波, 黄海涛, 等. 不对称调制下双级矩阵变换器的谐波分析[J]. 电工技术学报, 2016, 31(2): 102-111. Qin Xianhui, Zhou Bo, Huang Haitao, et al. Harmonic analysis of two-stage matrix conver terusingasymmetricmodulation[J]. Transactions of China Electrotechnical Society, 2016, 31(2): 102-111. [5] Xiao D, Rahman M F. Sensorless direct torque and flux controlled IPM synchronous machine fed by matrix converter over a wide speed range[J]. IEEE Transactions on Industrial Informatics, 2013, 9(4): 1855-1867. [6] 郭有贵. 矩阵变换器双电压合成定理及其自动调节能力研究[J]. 中国电机工程学报, 2006, 26(21): 71-75. Guo Yougui. Research on double input line-to-line voltages composition theorem and its self- adjustability[J]. Proceedings of the CSEE, 2006, 26(21): 71-75. [7] 夏长亮, 阎彦. 矩阵变换器-永磁同步电机系统[J]. 电工技术学报, 2015, 30(23): 2-9. Xia Changliang, Yan Yan. Matrix converter permanent magnet synchronous motor drives[J]. Transaction of China Electrotechnical Society, 2015, 30(23): 2-9. [8] 孙凯, 周大宁, 黄立培, 等. 矩阵式变换器在电源异常时的运行性能分析[J]. 电工电能新技术, 2004, 23(2): 9-12. Sun Kai, Zhou Daning Huang Lipei, et al. Performance analysis of matrix converter in abnormal power supply[J]. Advanced Technology of Electrical Engineering and Energy, 2004, 23(2): 9-12. [9] 宋卫章, 钟彦儒, 孙向东. 具有高电压传输比且能抵御非正常输入的Z-源双级矩阵变换器[J]. 中国电机工程学报, 2010, 30(24): 21-28. Song Weizhang, Zhong Yanru, Sun Xiangdong. Z-source two-stage matrix converter with high voltage transfer ratio and immune to abnormal input voltages[J]. Proceedings of the CSEE, 2010, 30(24): 21-28. [10] 王兴伟, 林桦, 佘宏武, 等. 矩阵变换器在非正常输入电压下的调制方法[J]. 电力自动化设, 2011, 31(1): 19-22. Wang Xingwei, Lin Hua, She Hongwu, et al. Matrix converter modulation with abnormal input voltage[J].Electric Power Automation Equipment, 2011, 31(1): 19-22. [11] Wang Xingwei, Lin Hua, She Hongwu, et al. A research on space vector modulation strategy for matrix converter under abnormal input-voltage conditions[J]. IEEE Transactions on Industrial Electronics, 2012, 59(1): 93-104. [12] Dastfan A, Haghshenas M. Design and simulation of a power supply based on a matrix converter under unbalanced input voltage[C]//Proceedings of the 41st International Universities Power Engineering Con- ference, Newcastle-Upon-Tyne, UK, 2006: 569-573. [13] Lee K B, Blaabjerg F. Sensorless DTC-SVM for induction motor driven by a matrix converter using a parameter estimation strategy[J]. IEEE Transactions on Industrial Electronics, 2008, 55(2): 512-521. [14] Wang J, Jiang J. Variable-structure direct torque control for induction motor driven by a matrix converter with over modulation strategy[C]//IEEE 6th International Power Electronics and Motion Control Conference, Wuhan, 2009: 580-584. [15] Rodriguez J, Rivera M, Kolar J, et al. Areview of control and modulation methods for matrix con- verters[J]. IEEE Transactions on Industrial Elec- tronics, 2012, 59(1): 58-70. [16] 夏益辉, 乔鸣忠, 张晓峰, 等. 矩阵变换器间接空间矢量过调制策略分析与研究[J]. 电工技术学报, 2015, 30(21): 25-29. Xia Yihui, Qiao Mingzhong, Zhang Xiaofeng, et al. The analysis and research of indirect space vector over-modulation strategy for matrix converters[J]. Transactions of China Electrotechnical Society, 2015, 30(21): 25-29.
2017, Vol. 32 
