电工技术学报  2015, Vol. 30 Issue (14): 80-85    DOI:
ICEMS2014专题 |
强迫式循环蒸发冷却电机定子三维温度场仿真分析
张帆1,2,余中军1,王东1,刘德志1
1.海军工程大学舰船综合电力技术国防科技重点实验室 武汉 430033;
2.海军航空工程学院控制工程系 烟台 264001
Simulation Analysis of 3D Thermal Field in the Stator of Motor with Forced Evaporative Cooling System
Fan Zhang1,2,Zhongjun Yu1,Dong Wang1,Dezhi Liu1
1. National Key Laboratory of Science and Technology on Vessel Integrated Power System Naval University of Engineering Wuhan 430033 China;
2. Naval Aeronautical Engineering Institute Yantai 264001 China
全文: PDF (913 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 

强迫式蒸发冷却系统具有介质用量小、发热体温度分布均匀、温差小的特点,具有良好的应用前景。本文详细阐述了强迫式蒸发冷却电机定子三维温度场的仿真方法,介绍了边界条件的合理简化方法。经试验验证,本文所用仿真方法具有较高的可靠性及准确度。在此基础上,本文研究了两种不同的结构参数对强迫式蒸发冷却电机定子温度场分布的影响。

服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
张帆
余中军
王东
刘德志
关键词 蒸发冷却温度场仿真电机热设计换热特性    
Abstract

Forced evaporative cooling(FEC) system has significant advantages in less dosage of cooling medium, uniform thermal field and less temperature difference, which can be applied well in practice. This paper details the simulation method of 3D thermal field in stator with a FEC system, and proposes a simplified method in setting the boundary conditions. And the reliability and accuracy of the simulation method is verified by experimental method. On this basis, two structural factors that influenced the stator thermal field are analyzed by the simulation method.

Key wordsEvaporative cooling    simulation of thermal field    thermal design of motor    heat transfer characteristic   
收稿日期: 2015-06-10      出版日期: 2015-09-08
PACS: TM301  
基金资助:

国家自然科学基金(51207163,51137005),国家重点基础研究发展计划资助项目(2013CB035601),国家优秀青年基金资助项目(51222705)

作者简介: 张 帆 女,1989年生,硕士,研究方向为电机冷却技术。余中军 男,1983年生,副研究员,硕士生导师,研究方向为电机冷却技术。
引用本文:   
张帆,余中军,王东,刘德志. 强迫式循环蒸发冷却电机定子三维温度场仿真分析[J]. 电工技术学报, 2015, 30(14): 80-85. Fan Zhang,Zhongjun Yu,Dong Wang,Dezhi Liu. Simulation Analysis of 3D Thermal Field in the Stator of Motor with Forced Evaporative Cooling System. Transactions of China Electrotechnical Society, 2015, 30(14): 80-85.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/Y2015/V30/I14/80