Analysis of 3-Dimensional Field and Calculation of Inductance for a New Structure of a Permanent Magnet Canned Motor
Ni Youyuan1, 2, Huang Ya1, Zhao Liang1
1. Hefei University of Technology Hefei 230009 China; 2. Collaborative Innovation Center of Industrial Energy-Saving and Power Quality Control Hefei 230601 China
Abstract:The calculation for a new structure of permanent magnet canned motor for a canned pump system is done using a three-dimensional(3D) finite element method(FEM). The motor has a simple structure without rotor iron core. For the leakage inductance of the end winding can not be ignored, a 3D numerical method is required. First, the 3D magnetic field of the motor is analyzed. Furthermore, the eddy current loss of the can is analyzed using a 3D transient FEM. Second, using an energy perturbation method, the self-inductance and mutual inductance of the windings are calculated in terms of different rotor positions under the rated load. In addition, the values of direct axis inductance Ld and quadrature axis inductance Lq are calculated by the coordinate transformation. Finally, the computed results of the inductance of the prototype are validated by the measured results.
倪有源, 黄亚, 赵亮. 新型结构永磁屏蔽电机三维磁场分析和电感计算[J]. 电工技术学报, 2015, 30(1): 98-104.
Ni Youyuan, Huang Ya, Zhao Liang. Analysis of 3-Dimensional Field and Calculation of Inductance for a New Structure of a Permanent Magnet Canned Motor. Transactions of China Electrotechnical Society, 2015, 30(1): 98-104.
[1] Hanker A, Nordmann R. Measurement of losses caused by canned magnetic bearings[C]. The 6th International Symposium on Magnetic Suspension Technology, Turin, Italy, 2001. [2] Ergene L T, Salon S J. Determining the equivalent circuit parameters of canned solid-rotor induction motors[J]. IEEE Transactions on Magnetics, 2005, 41(7): 2281-2286. [3] Dai Uneyama, Yuji Akiyama, Shinya Manome. The proposal of can loss estimation method of canned motor [C]. International Conference on Electrical Machines and Systems(ICEMS), Seoul, 2007: 882-885. [4] Li Weili, Zhang Xiaochen, Chen Wenbiao. Numerical analysis of thermal behavior of canned motor[C]. IEEE International Symposium on Industrial Electronics, Vigo, 2007: 1189-1194. [5] 梁艳萍, 张建涛, 索文旭. 双屏蔽复合转子电机涡流损耗分析[J]. 中国电机工程学报, 2009, 29(24): 78-83. Liang Yanping, Zhan Jiantao, Suo Wenxu. Eddy current losses analysis of double-cans composite- rotor motor [J]. Proceedings of the CSEE, 2009, 29(24): 78-83. [6] Burkhardt Y, Huth G, Urschel S. Eddy current losses in PM canned motors[C]. International Conference on Electrical Machines (ICEM), Rome, 2010: 1-7. [7] Nehl T W, Fouad F A, Demerdash N A. Deter- mination of saturated values of rotating machinery incremental and apparent inductances by an energy perturbation method[J]. IEEE Transactions on Power Apparatus and Systems, 1982, PAS-101(10): 4441- 4451. [8] 王爱龙, 熊光煜. 无刷双馈电机电感参数的计算[J]. 中国电机工程学报, 2009, 29(9): 93-97. Wang Ailong, Xiong Guangyu. Computation of inductances of the brushless doubly-fed machine[J]. Proceedings of the CSEE, 2009, 29(9): 93-97. [9] 李立毅, 马明娜, 刘家曦. 基于磁场能量摄动法的多段永磁直线电机段间电感参数的研究[J]. 电工技术学报, 2013, 28(7): 46-55. Li Liyi, Ma Mingna, Liu Jiaxi. Inductance analysis in pass-through section for multi-segmented permanent magnet linear motors based on magnetic energy perturbation[J]. Transactions of China Electrotechnical Society, 2013, 28(7): 46-55. [10] 谢德馨, 阎秀恪, 张奕黄. 旋转电机绕组磁链的三维有限元分析[J]. 中国电机工程学报, 2006, 26(21): 143-148. Xie Dexin, Yan Xiuke, Zhang Yihuang. Three dimen- sional finite element analysis of winding magnetic flux linkage in rotary electric machines[J]. Proceedings of the CSEE, 2006, 26(21): 143-148. [11] 宫海龙, 柴凤, 程树康. 高转矩永磁轮毂电机电感参数研究[J]. 中国电机工程学报, 2010, 30(21): 61-66. Gong Hailong, Chai Feng, Cheng Shukang. Research on inductance parameters of high torque permanent magnet in-wheel motor[J]. Proceedings of the CSEE, 2010, 30(21): 61-66. [12] 郑萍, 王勃, 吴帆. 电动汽车用双三相永磁同步电机饱和电感特性分析及计算方法[J]. 电工技术学报, 2013, 28(7): 19-25. Zheng Ping, Wang Bo, Wu Fan. Analysis and calcula- tion method of saturated inductance of a dual-three phase permanent-magnet synchronous machine for electric vehicles[J]. Transactions of China Electro- technical Society, 2013, 28(7): 19-25.