电工技术学报  2022, Vol. 37 Issue (15): 3805-3817    DOI: 10.19595/j.cnki.1000-6753.tces.211076
电力系统 |
基于增广动态相量法的变压器励磁涌流频率自适应仿真
龚振1, 刘承锡1, 姚良忠1, 杨波2, 庄俊2, 黄晓辉3
1.武汉大学电气与自动化学院 武汉 430072;
2.中国电力科学研究院 南京 210003;
3.南京赫曦电气有限公司 南京 210008
Frequency Adaptive Simulation of Transformer Inrush Current Based on the Augmented Dynamic Phasor Method
Gong Zhen1, Liu Chengxi1, Yao Liangzhong1, Yang Bo2, Zhuang Jun2, Huang Xiaohui3
1. School of Electrical Engineering and Automation Wuhan University Wuhan 430027 China;
2. China Electric Power Research Institute Nanjing 210003 China;
3. Nanjing Hexi Electric Co. Ltd Nanjing 210008 China
全文: PDF (3457 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 电磁暂态仿真中,减小仿真步长可有效抑制非线性变压器仿真过冲失真问题,但大容量变压器的励磁涌流过程往往衰减缓慢,势必会造成仿真效率低,使得仿真时间明显增加。该文建立了一种含有非线性励磁支路的大容量变压器动态相量多尺度电磁暂态模型,并提出一种动态相量磁链预测方法,通过不同仿真步长对磁链和电流进行精准预测和仿真,解决了分段线性化在大步长下出现的过冲失真问题,实现了励磁涌流宽频特征下依旧可以在不牺牲较多谐波的情况下采用大步长仿真的功能。当励磁涌流刚发生时,磁链动态相量变化较大,利用较小仿真步长对磁链进行预测,从而根据电流-磁链曲线拟合关系求得励磁涌流;当检测到磁链频谱集中在工频附近时,磁链的动态相量形式将保持恒定,采用大仿真步长预测磁链,从而根据电流-磁链关系求得准确的励磁电流,在采用大步长的同时解决了过冲失真问题,增加了仿真的计算效率。最后的仿真结果验证了该文提出的变压器模型及动态相量预测法的正确性和有效性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
龚振
刘承锡
姚良忠
杨波
庄俊
黄晓辉
关键词 动态相量预测法励磁涌流非线性过冲现象    
Abstract:The overshoot problem can be avoided by adopting small time step in electromagnetic simulations, and the inrush current of a large capacity transformer usually decays very slowly which will certainly results in low simulation efficiency. In this paper, an augmented dynamic phasor multi-timescale electromagnetic transient model was established for large-capacity transformer with nonlinear excitation branch, and a dynamic phasor flux prediction method was utilized. The current can be accurately predicted and simulated, which solves the overshoot problem of piecewise linearization under large time steps, and large time steps can be adopted without sacrificing more current harmonic components. When the inrush current occurred, a small-time step was adopted to predict the flux linkage, then magnetizing inrush current was obtained by current-flux curve fitting function. When the flux linkage spectrum was detected concentrated near the fundamental frequency, the flux linkage waveform will maintain its sinusoidal characteristics then a large time step can be adopted without sacrifice of simulation accuracy. In this way, the accurate inrush current was simulated utilizing current-flux curve fitting function, and the overshoot problem was solved using large step size to accelerate the simulation speed. Finally, the simulation results verified the correctness of the proposed transformer model and dynamic phasor prediction method.
Key wordsDynamic phasor prediction method    inrush current    nonlinear    overshoot   
收稿日期: 2021-07-12     
PACS: TM743  
基金资助:国家自然科学基金资助项目(52007133)
通讯作者: 刘承锡 男,1985年生,教授,博士生导师,研究方向为电力系统仿真计算、电力系统稳定与控制。E-mail:liuchengxi@whu.edu.cn   
作者简介: 龚振 男,1993年生,博士研究生,研究方向为电力系统多尺度仿真计算、新型电力系统稳定与控制。E-mail:gongzhen@whu.edu.cn
引用本文:   
龚振, 刘承锡, 姚良忠, 杨波, 庄俊, 黄晓辉. 基于增广动态相量法的变压器励磁涌流频率自适应仿真[J]. 电工技术学报, 2022, 37(15): 3805-3817. Gong Zhen, Liu Chengxi, Yao Liangzhong, Yang Bo, Zhuang Jun, Huang Xiaohui. Frequency Adaptive Simulation of Transformer Inrush Current Based on the Augmented Dynamic Phasor Method. Transactions of China Electrotechnical Society, 2022, 37(15): 3805-3817.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.211076          https://dgjsxb.ces-transaction.com/CN/Y2022/V37/I15/3805