电工技术学报  2020, Vol. 35 Issue (14): 2951-2958    DOI: 10.19595/j.cnki.1000-6753.tces.190741
电工理论与新技术 |
921A钢板腐蚀电场的Frumkin修正
徐庆林1, 王向军1, 张建春1, 刘德红2
1.海军工程大学电气工程学院 武汉 430033;
2.武汉科技大学城市学院 武汉 430083
Frumkin Correction of Corrosion Electric Field Generated by 921A Steel
Xu Qinglin1, Wang Xiangjun1, Zhang Jianchun1, Liu Dehong2
1. College of Electrical Engineering Naval University of Engineering Wuhan 430033 China;
2. City College Wuhan University of Science and Technology Wuhan 430083 China
全文: PDF (2478 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 为了研究不同质量分数氯化钠溶液中腐蚀电场的Frumkin修正效果,采用电化学阻抗谱测试得到921A钢电极在腐蚀电位下的双电层电容,并由此计算分散层电位的实验值,根据双电层的Stern模型,推导分散层电位与双电层电位、支持电解质质量分数的理论关系,并得到分散层电位的理论值。根据Frumkin修正理论,对阴极和阳极的电极过程动力学分别进行修正,得到与分散层电位相关的修正后的Tafel方程式。分别以修正前后的Tafel方程式作为921A钢板腐蚀电场边界元模型的边界条件,得到修正前后的腐蚀电场分布,并与实测腐蚀电场进行对比。结果表明,修正后的电场模量幅值与实验结果更为接近,说明在仿真过程中对Tafel边界条件进行修正是有必要的,当氯化钠溶液质量分数分别为1.5%、2.5%和3.5%时,修正效果分别为12.2%、10.8%和9.4%。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
徐庆林
王向军
张建春
刘德红
关键词 腐蚀电场Frumkin修正双电层分散层电位921A钢边界元法    
Abstract:In order to study the Frumkin correction effect of corrosion electric field in different concentrations of sodium chloride solution, the electric double layer (EDL) capacitance of 921A steel electrode at the corrosion potential was acquired by electrochemical impedance spectroscopy (EIS) Accordingly the experimental value of diffuse layer potential was calculated. The theoretical relationship between diffuse layer potential and potential of EDL and concentration of supporting electrolyte was derivedaccording to the Stern model of EDL. Therefore, the theoretical value of diffuse layer potential was obtained. According to the Frumkin correction theory, the electrode kinetics of cathode and anode were corrected respectively, and the modified Tafel equation related to diffuse layer potential was acquired. The uncorrected and corrected Tafel equation was used as the boundary condition of the boundary element model (BEM) of corrosion electric fieldfor 921A steel plate, so the corrosion electric field distributions before and after Frumkin correction were obtained and compared with the experimental results. The results show that the corrected amplitude of electric field modulus is closer to experimental values, indicating that it is necessary to correct the Tafel boundary condition during simulation process. Moreover, when the concentration of sodium chloride solution is 1.5%, 2.5% and 3.5%, the correction effectis 12.2%, 10.8%, and 9.4%, respectively.
Key wordsCorrosion electric field    Frumkin correction    electric double layer    diffuse layer potential    921A steel    boundary element model   
收稿日期: 2019-06-18     
PACS: TM15  
基金资助:国家自然科学基金面上项目(41476153)、武汉科技大学城市学院科学基金项目(2018CYZDKY002)资助
通讯作者: 王向军 男,1973年生,教授,博士生导师,研究方向为电磁环境与防护技术。E-mail: wxjnue@hotmail.com   
作者简介: 徐庆林 男,1991年生,博士研究生,研究方向为电磁环境与防护技术。E-mail: csuxql@163.com
引用本文:   
徐庆林, 王向军, 张建春, 刘德红. 921A钢板腐蚀电场的Frumkin修正[J]. 电工技术学报, 2020, 35(14): 2951-2958. Xu Qinglin, Wang Xiangjun, Zhang Jianchun, Liu Dehong. Frumkin Correction of Corrosion Electric Field Generated by 921A Steel. Transactions of China Electrotechnical Society, 2020, 35(14): 2951-2958.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.190741          https://dgjsxb.ces-transaction.com/CN/Y2020/V35/I14/2951