Constant Current Charging Technology for Variable Load Wireless Charging System
Song Kai1,2, Li Zhenjie2, Du Zhijiang1, Zhu Chunbo2
1. School of Mechatronics Engineering Harbin Institute of Technology Harbin 150001 China; 2. School of Electrical Engineering and Automation Harbin Institute of Technology Harbin 150001 China
Abstract:Based on the magnetic coupled resonance theory, a wireless power transfer (WPT) system features plate core structure is porposed to realize constant current charging for the variable load. The main factors that affect the transfer power, system efficiency and charging current are analyzed by the equivalent circuit model. Based on the dynamic characteristic of supercapacitor’s equivalent load resistance during the constant current charging process, different values of power resistor are used to simulate its charging characteristic. Firstly, the regulation of charging current by the secondary side Buck converter is analyzed and the relationship between duty cycle and charging current is obtained. Then, constant current charging is achieved by PI control algorithm. Secondly, through the theoretical analysis and simulation, the parameters of the magnetic coupler are optimized and designed. Finally, the experimental setup is built to validate the system design method. When the transfer distance is 15cm and the range of load resistance is 0.5~5Ω, 29A constant charging current is achieved. Furthre, when load resistance is 3.2Ω, the designed system realizes 87.7% system efficiency and 2.58kW transfer power.
宋凯, 李振杰, 杜志江, 朱春波. 变负载无线充电系统的恒流充电技术[J]. 电工技术学报, 2017, 32(13): 130-136.
Song Kai, Li Zhenjie, Du Zhijiang, Zhu Chunbo. Constant Current Charging Technology for Variable Load Wireless Charging System. Transactions of China Electrotechnical Society, 2017, 32(13): 130-136.
[1] 陈琛, 黄学良, 谭林林, 等. 电动汽车无线充电时的电磁环境及安全评估[J]. 电工技术学报, 2015, 30(19): 61-66. Chen Chen, Huang Xueliang, Tan Linlin, et al. Electromagnetic environment and security evaluation for wireless charging of electric vehicles[J]. Transa- ctions of China Electrotechnical Society, 2015, 30(19): 61-66. [2] 赵争鸣, 刘方, 陈凯南. 电动汽车无线充电技术研究综述[J]. 电工技术学报, 2016, 31(20): 30-40. Zhao Zhengming, Liu Fang, Chen Kainan. New progress of wireless charging technology for electric vehicles[J]. Transactions of China Electrotechnical Society, 2016, 31(20): 30-40. [3] Li Hongchang, Li Jie, Wang Kangping, et al. A maximum efficiency point tracking control scheme for wireless power transfer systems using magnetic resonant coupling[J]. IEEE Transactions on Power Electronics, 2015, 30(7): 3998-4008. [4] Wang C S, Stielau O H, Covic G. Design considerations for a contactless electric vehicle battery charger[J]. IEEE Transactions on Power Electronics, 2005, 52(5): 1308-1314. [5] Budhia M, Covic G, Boys J T. Design and optimization of circular magnetic structures for lumped inductive power transfer systems[J]. IEEE Transactions on Power Electronics, 2014, 26(11): 3096-3108. [6] Qu Xiaohui, Han Hongdou, Wong S C, et al. Hybrid IPT topologies with constant current or constant voltage output for battery charging applications[J]. IEEE Transactions on Power Electronics, 2015, 30(11): 6329-6337. [7] Zhang Wei, Mi C C. Compensation topologies of high-power wireless power transfer systems[J]. IEEE Transactions on Vehicular Technology, 2016, 65(6): 4768-4778. [8] 刘闯, 郭赢, 葛树昆, 等. 具备恒压特性的SP/S感应式无线电能传输系统[J]. 电工技术学报, 2016, 31(13): 149-154. Liu Chuang, Guo Ying, Ge Shukun, et al. The SP/S inductive power transfer system with constant voltage characteristics[J]. Transactions of China Electro- technical Society, 2016, 31(13): 149-154. [9] 谭林林, 颜长鑫, 黄学良, 等. 无线电能传输系统电压稳定在线控制策略的研究[J]. 电工技术学报, 2015, 30(19): 12-17. Tan Linlin, Yan Changxin, Huang Xueliang, et al. Stable voltage online control strategy of wireless power transmission system[J]. Transactions of China Electrotechnical Society, 2015, 30(19): 12-17. [10] Gati E, Kampitsis G. Variable frequency controller for inductive power transfer in dynamic conditions[J]. IEEE Transactions on Power Electronics, 2017, 32(2): 1684-1696.