Optimization of the Source Coil of Magnetic Coupling Resonant Wireless Power Transmission System with Class E Power Amplifier
Yan Zhuo1, Wang Tianfeng2, Zhang Xiaochen3
1. College of Electronic and Informational Engineering Hebei University Baoding 071002 China; 2. School of Automation Beijing Institute of Technology Beijing 100081 China; 3. Industrial & Commercial College Hebei University Baoding 071002 China
Abstract:At first, a class E power amplifier is designed for magnetic coupling resonant wireless power transmission system as the system power. Given that the class E power amplifier performance will be influenced by the load parameters, an optimization of the source coil structure of wireless transmission system is applied to reduce the drop of the system performance caused by class E power amplifier characteristics. Three kinds of the source coil structure are put forward and tested the change of voltage across the load in multiple load cases. The comparative study involves the structures’ influence on the load voltage and the transmission efficiency of the systems under the load coupled condition. The study found that the structure of multiple source coils and single resonance coil can decrease the load voltage variation, caused by the magnetic field distribution, by using the coupling between loads. And under the class E power amplifier, the structure of series of multiple source coils and resonance coils will cause the drop of system performance easily, and the effects on the loads caused by the coupling are very obvious.
闫卓, 王天风, 张晓晨. 带E类功放的磁耦合谐振无线输电系统源线圈优化[J]. 电工技术学报, 2017, 32(10): 162-167.
Yan Zhuo, Wang Tianfeng, Zhang Xiaochen. Optimization of the Source Coil of Magnetic Coupling Resonant Wireless Power Transmission System with Class E Power Amplifier. Transactions of China Electrotechnical Society, 2017, 32(10): 162-167.
[1] André Kurs, Aristeidis Karalis, Marin Soljacˇic´, et al. Wireless power transfer via stronglycoupled magnetic resonances[J]. Science, 2007, 317(83): 83-86. [2] 李阳, 杨庆新, 闫卓, 等. 磁耦合谐振式无线电能传输方向性分析与验证[J]. 电工技术学报, 2014, 29(2): 197-203. Li Yang, Yang Qingxin, Yan Zhuo, et al. Analysis and validation on characteristic of orientation in wireless power transfer system via coupled magnetic resonances[J]. Transactions of China Electrotechnical Society, 2014, 29(2): 197-203. [3] 李阳, 杨庆新, 闫卓, 等. 无线电能有效传输距离及其影响因素分析[J]. 电工技术学报, 2013, 28(1): 106-112. Li Yang, Yang Qingxin, Yan Zhuo, et al. Analysis on effective range of wireless power transfer and its impact factors[J]. Transactions of China Electrotechnical Society, 2013, 28(1): 106-112. [4] Rizal Johari, James V Krogmeier, David J Love. Analysis and practical considerations in imple- menting multiple transmitters for wireless power transfer via coupled magnetic resonance[J]. IEEE Transactions on Industrial Electronics, 2014, 61(4): 1774-1783. [5] Bilel Kallel, Olfa Kanoun1, Thomas Keutel, et al. Improvement of the efficiency of MISO configuration in inductive power transmission in case of coils misalignment[C]//Proceedings of IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2014: 856-861. [6] Kisong Lee, Dong-Ho Cho. Diversity analysis of multiple transmitters in wireless power transfer system[J]. IEEE Transactions on Magnetics, 2013, 49(6): 2946-2952. [7] Dukju Ahn, Songcheol Hong. Effect of coupling between multiple transmitters or multiple receivers on wireless power transfer[J]. IEEE Transactions onIndustrial Electronics, 2012, 60(7): 2602-2613 . [8] Fu Minfan, Zhang Tong, Ma Chengbin, et al. Efficiency and optimal loads analysis for multiple- receiver wireless power transfer systems[J]. IEEE Transactions on Microwave Theory and Techniques, 2015, 63(3): 801-812 [9] Zhang Tong, Fu Minfan, Ma Chengbin, et al. Optimal load analysis for a two-receiver wireless power transfer system[C]//2014 IEEE Wireless Power Transfer Conference (WPTC), 2014: 84-87. [10] 李阳, 张雅希, 闫卓, 等. 磁耦合谐振式无线电能传输系统阻抗分析与匹配电路设计方法[J]. 电工技术学报, 2016, 31(22): 12-18. Li Yang, Zhang Yaxi, Yan Zhuo, et al. Impedance analysis and design of matching circuit in wireless power transfer system via coupled magnetic resonances[J]. Transactions of China Electrotechnical Society, 2016, 31(22): 12-18. [11] 毛世通, 朱春波, 宋凯, 等. 基于端口阻抗的磁耦合谐振式无线电能传输特征参数仿真方法研究[J]. 电工技术学报, 2015, 30(19): 95-102. Mao Shitong, Zhu Chunbo, Song Kai, et al. Characteristic parameter simulation method for magnetic coupling resonance wireless power transfer based on port impedance[J]. Transactions of China Electrotechnical Society, 2015, 30(19): 95-102. [12] Raab F H. Idealized operation of the class E tuned power amplifier[J]. IEEE Transactions on Circuits and Systems, 1977, 24(12): 725-735. [13] 薛明, 杨庆新, 李阳, 等. 磁耦合谐振式无线电能传输系统负载特性研究[J]. 电工技术学报, 2013, 28(2): 28-34. Xue Ming, Yang Qingxin, Li Yang, et al. The study of load characteristic inwireless energy transfer system based on EM coupling resonance[J]. Transactions of China Electrotechnical Society, 2013, 28(2): 28-34. [14] Casanova J J, Zhen Ninglow, Lin Jenshan, et al. A loosely coupled planar wireless power system for multiple receivers[J]. IEEE Transactions on Industrial Electronics, 2009, 56(8): 3060-3068.