电工技术学报  2015, Vol. 30 Issue (14): 184-192    DOI:
电机与电器 |
交流电机端口特性的数字化实现方法
宋鹏先1,2,李耀华1,王平1,苏朝阳1,2
1.中国科学院电工研究所 中国科学院电力电子与电气驱动重点实验室 北京市 海淀区 100190;
2.中国科学院大学 北京市 海淀区 100039
The Digital Realization Method of AC Motor Simulator
Song Pengxian1,2,Li Yaohua1,Wang Ping1,Su Zhaoyang1,2
1. Key Laboratory of Power Electronics and Electric Drive, Institute of Electrical Engineering, Chinese Academy of Sciences, Haidian District Beijing 100190 China;
2. University of Chinese Academy of Sciences Haidian District Beijing 100039 China
全文: PDF (1482 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 针对电机驱动器的性能测试和考核需求,提出了一种可模拟交流电机端口特性的电力电子负载模拟系统,取代了传统交流传动平台对各类电机供电电源进行测试。本文首先分别建立异步电机和同步电机的动态数学模型,采用Adams数值法,获得电机实际接入时的电流状态。鉴于电机动态变化时,其电流波形存在非重复性的暂态过渡分量,故采用PI控制器控制功率变换器的输入电流准确跟踪指令电流,使变换器具有与实际电机相同的端口特性。对异步电机的空载启动,突加负载以及同步电机的闭环启动等典型工况进行了模拟,仿真和实验结果表明,该负载模拟系统能够灵活高效的模拟交流电机的端口特性,验证了本方案的有效性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
宋鹏先
李耀华
王平
苏朝阳
关键词 电机驱动器电力电子负载异步电机同步电机PI控制器电机模拟器    
Abstract:In view of the motor drive for the performance test and examination requirement, the power electronic load simulation system which can simulate ac motor port features is proposed to replace traditional drive platform used in motor power testing. The mathematical model of asynchronous motor and synchronous motor are established respectively, which can be solved using Adams algorithm to obtain the port current state. In view of the motor dynamic changes, the current waveform contains transition components which are not repetitive. So PI controller is used to control the power converter input current tracking the instruction current accurately, making the converter have the same port characteristics as the actual motor. No-load starting of asynchronous motor, sudden loading and the working condition with vector closed-loop control of synchronous motor are simulated. Simulation and experimental results show that the load simulation system can simulate ac motor port characteristics flexibly and efficiently, so as to prove the validity of proposed scheme.
Key wordsMotor drive    Power Electronic Load (PEL)    Asynchronous motor (AM)    Synchronous motor (SM)    PI controller    motor simulator   
收稿日期: 2014-09-10      出版日期: 2015-09-08
PACS: TM46  
作者简介: 宋鹏先 男,1986年生,博士在读,研究方向大功率变流器及柔性交流输电控制。李耀华 男,1966年生,博士,研究员,博士生导师,主要从事现代电力电子技术、电机与驱动控制、轨道交通牵引等研究。
引用本文:   
宋鹏先,李耀华,王平,苏朝阳. 交流电机端口特性的数字化实现方法[J]. 电工技术学报, 2015, 30(14): 184-192. Song Pengxian,Li Yaohua,Wang Ping,Su Zhaoyang. The Digital Realization Method of AC Motor Simulator. Transactions of China Electrotechnical Society, 2015, 30(14): 184-192.
链接本文:  
https://dgjsxb.ces-transaction.com/CN/Y2015/V30/I14/184