基于多物理场耦合的气体绝缘母线触头接触温升有限元计算

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (736 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract Contact temperature rise is closely relative with the operation condition and reliability of gas insulated busbars(GIB). Three-dimensional(3-D) eddy-current field model is established to calculate the power losses in the conducting components of GIB. As the heat source input, the power losses are used for the finite element analysis of fluid and thermal fields and the temperature distribution in GIB is obtained. In order to model the contact resistance and not to change the temperature distribution, the structure of contacts is properly simplified. Based on computational fluid dynamics(CFD), the multiple species transport technique is employed to calculate the convective heat transfer of different gases both inside and outside GIB, eliminating the iterative calculation of convective heat transfer coefficient. The temperature dependent contact resistance and thermal properties of gases are considered in the model. The reasonability of the simplification of contact resistance and the effectiveness of the coupled multi-physics method are validated with the comparison between the calculated and tested results. The proposed model will provide methodology and reference for overheat condition monitoring of GIB.

Key words： Gas insulated busbars(GIB) contact resistance multiple species transport eddy current field temperature distribution coupled multi-physics

Received: 23 October 2013 Published: 22 May 2014

PACS:

TM930.1

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Sun Guoxia
	Shu Naiqiu
	Wu Xiaowen
	Xie Zhiyang
	Jin Xiangchao
	Peng Hui

Cite this article:

Sun Guoxia,Shu Naiqiu,Wu Xiaowen等. Finite Element Analysis of Contact Temperature rise in Gas Insulated Busbars based on Coupled Multi-physics[J]. Transactions of China Electrotechnical Society, 2013, 28(2增): 408-413.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2013/V28/I2增/408

[1] Runde M, Lillevik O, Larsen V, et al. Condition assessment of contacts in gas-insulated substations[J]. IEEE Transactions on Power Delivery, 2004, 19(2): 609-617.
[2] Fujinami H, Takuma T, Kawamoto T. Development of detection method with a magnetic field sensor for incomplete contact in gas-insulated switches and bus connecting parts[J]. IEEE Transactions on Power Delivery, 1995, 10(1): 229-236.
[3] Purushothaman S, Leon F. Heat transfer model for toroidal transformers[J]. IEEE Transactions on Power Delivery, 2012, 27(2): 813-820.
[4] Hwang C C, Chang J J, Jiang Y H. Analysis of electromagnetic and thermal fields for a bus duct system[J]. Electric power systems research, 1998, 45(1): 39-45.
[5] Hedia H, Henrotte F, Meys B, et al. Arrangement of phase and heat constraints in a busbar[J]. IEEE Transactions on Magnetics, 1999, 35(3): 1274-1277.
[6] Kim S W, Kim H H, Hahn S C, et al. Coupled finite- element-analytic technique for prediction of temperature rise in power apparatus[J]. IEEE Transactions on Magnetics, 2002, 38(2): 921-924.
[7] Kim J K, Hahn S C, Park K Y, et al. Temperature rise prediction of EHV GIS bus bar by coupled magneto- thermal finite element method[J]. IEEE Transactions on Magnetics, 2005, 41(5): 1636-1639.
[8] Ho S L, Li Y, Lin X, et al. Calculations of eddy current, fluid, and thermal fields in an air insulated bus duct system[J]. IEEE Transactions on Magnetics, 2007, 43(4): 1433-1436.
[9] 宋帆, 申春红, 林萃, 等. 800kVGIS隔离开关磁场-温度场计算与分析[J]. 高电压技术, 2008, 34(7): 1383-1388. SONG Fan, Shen Chunhong, Lin Cui, et al. Calculation and Analysis on Magnet-thermal Fields of 800Kv GIS Disconnector[J]. High Voltage Engineering, 2008, 34(7): 1383-1388.
[10] 纽春萍, 陈德桂, 刘颖异, 等. 交流接触器温度场仿真及影响因素的分析[J]. 电工技术学报, 2007, 22(5): 71-77. Niu Chunping, Chen Degui, Liu Yingyi, et al. Temperature field simulation of AC conductor and analysis of its influence factors[J]. Transactions of China Electro-technical Society, 2007, 22(5): 71-77.
[11] Ho S L, Li Y, Edward W C, et al. Analyses of three- dimensional eddy current field and thermal problems in an isolated phase bus[J]. IEEE Transactions on Magnetics, 2003, 39(3): 1515-1518.
[12] Ho S L, Li Y, Lin X, et al. A 3-D study of eddy current field and temperature rises in a compact bus duct system[J]. IEEE Transactions on Magnetics, 2006, 42(4): 987-990.
[13] 谢德馨, 姚缨英, 白保东, 等. 三维涡流场的有限元分析[M]. 北京: 机械工业出版社, 2007: 10-13.
[14] 吴晓文, 舒乃秋, 李洪涛, 等. 基于流体多组分传输的气体绝缘母线温度场数值计算与分析[J]. 中国电机工程学报, 2012, 32(33): 141-147. Wu Xiaowen, Shu Naiqiu, Li Hongtao, et al. Thermal field calculation and analysis of gas insulated busbars based on fluid multiple species transport[J]. Proceedings of the CSEE, 2012, 32(33): 141-147.
[15] 李铁, 李伟力, 袁竹林. 用不同辐射模型研究下降管内传热传质特性[J]. 中国电机工程学报, 2007, 27(2): 92-98. Li Tie, Li Weili, Yuan Zhulin. Different radiative models for heat and mass transfer characteristics in vertical pipe[J]. Proceedings of the CSEE, 2007, 27(2): 92-98.
[16] 丁祖荣. 流体力学[M]. 北京: 高等教育出版社, 2003: 19-21.
[17] Lee S H, Lee B Y, Kim H K, et al. Local heat source approximation technique for predicting temperature rise in power capacitors[J]. IEEE Transactions on Magnetics, 2009, 45(3): 1250-1253.
[18] 刘志刚, 耿英三, 王建华, 等. 基于流场-温度场耦合计算的新型空心电抗器设计与分析[J]. 电工技术学报, 2003, 18(6): 59-63. Liu Zhigang, Geng Yingsan, Wang Jianhua, et al. Design and analysis of new type air-core reactor based on coupled fluid-thermal field calculation[J]. Transactions of China Electrotechnical Society, 2003, 18(6): 59-63.
[19] Eteiba M B, Aziz M M A, Shazly J H. Heat conduction problems in SF₆ gas cooled-insulated power transformers solved by the finite element method[J]. IEEE Transactions on Power Delivery, 2008, 23(3): 1457-1463.
[20] 赵镇南. 传热学[M]. 北京: 高等教育出版社, 2008: 177-179.