DC-DC变换器分层级构造方法

doi:10.19595/j.cnki.1000-6753.tces.221521

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1486 KB) HTML
输出: BibTeX | EndNote (RIS)

摘要

DC-DC变换器广泛应用于开关电源、电机传动等传统领域,以及新能源发电、电动汽车等新兴领域。不同应用场景通常对DC-DC变换器有不同的要求,当现有变换器的性能不能满足需求时,需要构造新的变换器。然而,凭经验或灵感构造出的DC-DC变换器往往缺乏普遍适用性。为了能够根据具体应用需求构造DC-DC变换器,该文在总结现有大部分DC-DC变换器构造方法的基础上,按“元器件-电路单元-变换器”三个层级,将DC-DC变换器的构造方法分为一次构造和二次构造。重点介绍一些典型构造方法的构造原理和构造步骤,并将构造方法进行分析和比较,为今后利用计算机技术智能构造和科学评价DC-DC变换器提供了参考。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张洋
	丘东元
	张波
	陈艳峰

关键词 ： DC-DC变换器, 构造方法, 拓扑, 图论

Abstract：

In order to synthesize DC-DC converters for specific application requirements, most of the existing synthesis methods of DC-DC converters are summarized. As listed in Tab, these methods can be divided into primary and secondary synthesis according to the three levels of “component-circuit cell-converter”. The principles and steps of typical synthesis methods are highlighted, and the requirements, scope, key technologies, development trends, advantages, and disadvantages of these methods are analyzed and compared. Moreover, the feasibility of using computer-aided technology in the above synthesis methods is discussed.

Tab Classification of Synthesis Methods of DC-DC Converters

Classification	Hierarchy	Typical Methods
Primary synthesis	Component-circuit cell	State equation method, flux balance method, graph search method
Secondary synthesis	Circuit cell-converter	Switching cell method, duality, cascading, layer and graft method, interleaving, R²P² method, replacing and inserting of impedance networks, serial-parallel-cascading connection of multioutput converters

The primary synthesis method refers to the synthesis of circuit cells directly from separate components. A circuit cell is a full-featured but relatively basic DC-DC converter that can be used as a basic unit to synthesize other converters. Regarding primary synthesis methods, some conclusions are listed as follows.
(1) The flux balance method synthesis DC-DC converters according to specific requirements (e.g., voltage gain), while the state equation method and graph search method do not. In addition, the latter two methods derive a large number of converters with various features that require further screening.
(2) The state equation method and the flux balance method traverse numerical values, so the implementation programs are simple. However, the graph search method traverses the graphs, which is more difficult to be programmed.
(3) Computer programs can be utilized in some steps of primary synthesis methods, but the utilization of the program still needs to be improved. In the future, full-featured software is expected to realize the whole process, from inputting the requirements to outputting the converter circuits.
Secondary synthesis methods involve synthesizing new topologies from existing topologies by changing connections of circuit cells, combining circuit cells, and adding or removing components or cells. Regarding secondary synthesis methods, some conclusions are listed as follows.
(1) Cascading, interleaving, R²P² method and serial-parallel-cascading connection of multioutput converters only need to fill the converter cells into specific structures, which require little computer-aided technology.
(2) Switching cell method, duality, layer and graft method have relatively clear steps, which are suitable for programming.
(3) The replacing and inserting method of impedance networks is flexible, and some significant problems still need to be solved manually. Therefore, programming is not appropriate for this method currently.
In conclusion, the primary synthesis method is usually suitable for synthesizing DC-DC converters with fewer components and simpler functions, providing prototypes with different functions for the secondary synthesis. On the other hand, the secondary synthesis method is suitable for synthesizing complex converters. In the future, most of the synthesis methods are expected to be programmed, which can select and execute appropriate synthesis methods intelligently to synthesize a DC-DC converter that meets the given requirements.

Key words： DC-DC converter synthesis method topology graph theory

收稿日期: 2022-08-05

PACS:

TM46

基金资助:

国家自然科学基金资助项目（52277177, 52077085）

通讯作者: 丘东元女,1972年生,教授,博士生导师,研究方向为电力电子变换器拓扑构造与设计、无线电能传输机理及应用等。E-mail: epdyqiu@scut.edu.cn

作者简介: 张洋男,1998年生,硕士研究生,研究方向为电力电子变换器拓扑构造与设计。E-mail: 202120115175@mail.scut.edu.cn

引用本文:

张洋, 丘东元, 张波, 陈艳峰. DC-DC变换器分层级构造方法[J]. 电工技术学报, 2023, 38(20): 5473-5487. Zhang Yang, Qiu Dongyuan, Zhang Bo, Chen Yanfeng. Hierarchical Synthesis Methods of DC-DC Converters. Transactions of China Electrotechnical Society, 2023, 38(20): 5473-5487.

链接本文:

https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.221521 https://dgjsxb.ces-transaction.com/CN/Y2023/V38/I20/5473

[1] 张辉, 梁誉馨, 孙凯, 等. 直流微电网中多端口隔离型DC-DC变换器的改进虚拟电容控制策略[J]. 电工技术学报, 2021, 36(2): 292-304.
Zhang Hui, Liang Yuxin, Sun Kai, et al.Improved virtual capacitor control strategy of multi-port isolated DC-DC converter in DC microgrid[J]. Transactions of China Electrotechnical Society, 2021, 36(2): 292-304.
[2] 蔡旭, 杨仁炘, 周剑桥, 等. 海上风电直流送出与并网技术综述[J]. 电力系统自动化, 2021, 45(21): 2-22.
Cai Xu, Yang Renxin, Zhou Jianqiao, et al.Review on offshore wind power integration via DC trans- mission[J]. Automation of Electric Power Systems, 2021, 45(21): 2-22.
[3] 管乐诗, 温兆亮, 许晓志, 等. 适用于宽增益范围的可重构单级DC-DC变换器及其磁元件设计[J]. 电工技术学报, 2023, 38(6): 1571-1583.
Guan Leshi, Wen Zhaoliang, Xu Xiaozhi, et al.A modular reconfigurable single-stage DC-DC converter suitable for wide gain range and its magnetic design[J]. Transactions of China Electrotechnical Society, 2023, 38(6): 1571-1583.
[4] 佟明昊, 程明, 许芷源, 等. 电动汽车用车载集成式充电系统若干关键技术问题及解决方案[J]. 电工技术学报, 2021, 36(24): 5125-5142.
Tong Minghao, Cheng Ming, Xu Zhiyuan, et al.Key issues and solutions of integrated on-board chargers for electric vehicles[J]. Transactions of China Elec- trotechnical Society, 2021, 36(24): 5125-5142.
[5] Chen Manxin, Loh P C, Yang Yongheng, et al.A six-switch seven-level triple-Boost inverter[J]. IEEE Transactions on Power Electronics, 2021, 36(2): 1225-1230.
[6] 李虹, 王文财, 李亚敏, 等. 基于图论的S¹D¹L²C¹型DC-DC变换器可编程拓扑搜索算法[J]. 中国电机工程学报, 2021, 41(16): 5670-5683.
Li Hong, Wang Wencai, Li Yamin, et al.Program- mable topology searching algorithm for S¹D¹L²C¹ type DC-DC converters based on graph theory[J]. Proceedings of the CSEE, 2021, 41(16): 5670-5683.
[7] Nag S S, Panigrahi R, Mishra S K, et al.A theory to synthesize nonisolated DC-DC converters using flux balance principle[J]. IEEE Transactions on Power Electronics, 2019, 34(11): 10910-10924.
[8] Erickson R W.Synthesis of switched-mode conver- ters[C]//1983 IEEE Power Electronics Specialists Conference, Albuquerque, USA, 2015: 9-22.
[9] Maksimovic D, Cuk S.General properties and synthesis of PWM DC-to-DC converters[C]//20th Annual IEEE Power Electronics Specialists Con- ference, Milwaukee, USA, 2002: 515-525.
[10] Panigrahi R, Mishra S K, Joshi A.Synthesizing a family of converters for a specified conversion ratio using flux balance principle[J]. IEEE Transactions on Industrial Electronics, 2021, 68(5): 3854-3864.
[11] Panigrahi R, Mishra S K, Joshi A.Synthesis of an optimum converter topology for a specified voltage conversion ratio[J]. IEEE Transactions on Industry Applications, 2021, 57(4): 3923-3934.
[12] Panigrahi R, Mishra S K, Joshi A, et al.DC-DC converter synthesis: an inverse problem[J]. IEEE Transactions on Power Electronics, 2020, 35(12): 12633-12638.
[13] Pietkiewicz A, Tollik D.Systematic derivation of two-state switching DC-DC converter structures[C]// International Telecommunications Energy Conference, New Orleans, USA, 2009: 473-477.
[14] Li Yuzhuo, Ding Li, Li Yunwei.Isomorphic relation- ships between voltage-source and current-source converters[J]. IEEE Transactions on Power Elec- tronics, 2019, 34(8): 7131-7135.
[15] Zhang Guidong, Liao Yukai, Yu S S, et al.A graph-modeling approach to topology simplification in power converters[J]. IEEE Transactions on Power Electronics, 2022, 37(7): 8248-8261.
[16] Mo Liping, Chen Guipeng, Huang Jiangming, et al.Graph theory based programmable topology deriva- tion of multi-port DC-DC converters with reduced switches[J]. IEEE Transactions on Industrial Elec- tronics, 2021, 69(6): 5745-5755.
[17] 吴宁. 电网络分析与综合(修订版)[M]. 北京: 科学出版社, 2020.
[18] 张兴. 高等电力电子技术[M]. 北京: 机械工业出版社, 2011.
[19] Tymerski R, Vorperian V.Generation and classi- fication of PWM DC-to-DC converters[J]. IEEE Transactions on Aerospace and Electronic Systems, 1988, 24(6): 743-754.
[20] Williams B W.Generation and analysis of canonical switching cell DC-to-DC converters[J]. IEEE Transactions on Industrial Electronics, 2014, 61(1): 329-346.
[21] Marquez R, Contreras-Ordaz M A. The three-terminal converter cell, graphs, and generation of DC-to-DC converter families[J]. IEEE Transactions on Power Electronics, 2020, 35(8): 7725-7728.
[22] Freeland S D.Techniques for the practical application of duality to power circuits[J]. IEEE Transactions on Power Electronics, 1992, 7(2): 374-384.
[23] Bai Zhihong, Zhang Zhongchao.Conformation of multilevel current source converter topologies using the duality principle[J]. IEEE Transactions on Power Electronics, 2008, 23(5): 2260-2267.
[24] Matsuo H, Harada K. The cascade connection of switching regulators[J]. IEEE Transactions on Industry Applications, 1976, IA-12(2): 192-198.
[25] Cuk S, Middlebrook R D.A new optimum topology switching DC-to-DC converter[C]//IEEE Power Elec- tronics Specialists Conference, Palo Alto, USA, 2015: 160-179.
[26] 李福, 邓红雷, 张国驹, 等. 一种中间电容谐振型级联双向DC-DC变换器[J]. 电工技术学报, 2022, 37(20): 5253-5266.
Li Fu, Deng Honglei, Zhang Guoju, et al.A cascaded bidirectional DC-DC converter with intermediate capacitor resonance[J]. Transactions of China Electrotechnical Society, 2022, 37(20): 5253-5266.
[27] Wu T P, Chen Y K.A systematic and unified approach to modeling PWM DC/DC converters using the layer scheme[C]//27th Annual IEEE Power Electronics Specialists Conference, Baveno, Italy, 2002: 575-580.
[28] Wu T F, Chen Yukai.A systematic and unified approach to modeling PWM DC/DC converters based on the graft scheme[J]. IEEE Transactions on Industrial Electronics, 1998, 45(1): 88-98.
[29] Wu T F.Decoding and synthesizing transformerless PWM converters[J]. IEEE Transactions on Power Electronics, 2016, 31(9): 6293-6304.
[30] Zhang M T, Jovanovic M M, Lee F C Y. Analysis and evaluation of interleaving techniques in forward converters[J]. IEEE Transactions on Power Elec- tronics, 1998, 13(4): 690-698.
[31] 汪元鑫, 苏瑾, 胡金高. 电动汽车车载充电系统的设计与研究[J]. 电气技术, 2019, 20(7): 5-8, 17.
Wang Yuanxin, Su Jin, Hu Jingao.Research on on-board charging system for electric vehicle[J]. Electrical Engineering, 2019, 20(7): 5-8, 17.
[32] 丁杰, 高双, 赵世伟, 等. 基于耦合电感的对称式交错并联低输入电流纹波高增益DC-DC变换器[J]. 电工技术学报, 2021, 36(7): 1507-1515.
Ding Jie, Gao Shuang, Zhao Shiwei, et al.Sym- metrical interleaved low input current ripple high step-up DC-DC converter based on coupled indu- ctor[J]. Transactions of China Electrotechnical Society, 2021, 36(7): 1507-1515.
[33] Tse C K, Chow M H L, Cheung M K H. A family of PFC voltage regulator configurations with reduced redundant power processing[J]. IEEE Transactions on Power Electronics, 2001, 16(6): 794-802.
[34] Loera-Palomo R, Morales-Saldaña J A. Family of quadratic step-up DC-DC converters based on non- cascading structures[J]. IET Power Electronics, 2015, 8(5): 793-801.
[35] Zogogianni C G, Tatakis E C, Vekic M S.Non- isolated reduced redundant power processing DC/DC converters: a systematic study of topologies with wide voltage ratio for high-power applications[J]. IEEE Transactions on Power Electronics, 2019, 34(9): 8491-8502.
[36] Salvador M A, de Andrade J M, Lazzarin T B, et al. Methodology for synthesis of high-gain step-up DC-DC converters based on differential con- nections[J]. International Journal of Circuit Theory and Applications, 2021, 49(2): 306-326.
[37] Peng Fangzheng.Z-source inverter[J]. IEEE Transa- ctions on Industry Applications, 2003, 39(2): 504-510.
[38] Siwakoti Y P, Peng Fangzheng, Blaabjerg F, et al.
Impedance-source networks for electric power conver- sion part I: a topological review[J]. IEEE Transa- ctions on Power Electronics, 2015, 30(2): 699-716.
[39] Ye Yuanmao, Eric Cheng K W. Quadratic Boost converter with low buffer capacitor stress[J]. IET Power Electronics, 2014, 7(5): 1162-1170.
[40] Li Kerui, Hu Yafei, Ioinovici A.Generation of the large DC gain step-up nonisolated converters in conjunction with renewable energy sources starting from a proposed geometric structure[J]. IEEE Transa- ctions on Power Electronics, 2017, 32(7): 5323-5340.
[41] Wu Gang, Ruan Xinbo, Ye Zhihong.Nonisolated high step-up DC-DC converters adopting switched- capacitor cell[J]. IEEE Transactions on Industrial Electronics, 2015, 62(1): 383-393.
[42] Carbajal-Gutierrez E E, Morales-Saldana J A, Leyva- Ramos J. Modeling of a single-switch quadratic Buck converter[J]. IEEE Transactions on Aerospace and Electronic Systems, 2005, 41(4): 1450-1456.
[43] 杨平, 许建平, 董政, 等. 二次型Boost变换器工作模式及输出电压纹波分析[J]. 电工技术学报, 2014, 29(8): 110-118.
Yang Ping, Xu Jianping, Dong Zheng, et al.Output voltage ripple of quadratic Boost converter[J]. Transactions of China Electrotechnical Society, 2014, 29(8): 110-118.
[44] Zhu Binxin, Ding Feng, Vilathgamuwa D M.Coat circuits for DC-DC converters to improve voltage conversion ratio[J]. IEEE Transactions on Power Electronics, 2020, 35(4): 3679-3687.
[45] Li Xiaolu, Dong Zheng, Tse C K.Complete family of two-stage single-input multioutput configurations of interconnected power converters[J]. IEEE Transa- ctions on Power Electronics, 2020, 35(4): 3713-3728.