用于感应电机转速估计的感应线圈设计方法

doi:10.19595/j.cnki.1000-6753.tces.181059

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (35811 KB)
输出: BibTeX | EndNote (RIS)

摘要

转子槽谐波法作为一种重要的电机转速估计方法,受电机参数影响小,具有很强的参数鲁棒性,在感应电机无速度传感器控制领域应用前景良好。传统转子槽谐波法大部分基于定子电流进行分析,而定子电流中的转子槽谐波易受电机结构限制,且幅值较小,信噪比弱,影响了通用性和转速估计精度。针对上述问题,本文提出在电机内部布置线圈感应气隙磁场中的转子槽谐波,通过研究影响感应线圈中转子槽谐波信噪比的因素,提出感应线圈布置方式的优化设计方法。在一台十五相电机上开展了仿真和实验研究,结果表明所设计感应线圈可大幅提升转子槽谐波信噪比,转速估计方法具有良好的精度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张逸超
	王东
	易新强
	胡靖华
	孟繁庆

关键词 ：感应电机, 转子槽谐波, 感应线圈, 优化设计, 转速估计

Abstract：

As one of the most important methods of motor speed estimation, the method using rotor slot harmonics (RSH) has good application prospect on sensorless induction motor system, since it is hardly affected by motor parameter variation and has strong robustness to parameter variation. However, most of the traditional methods are based on RSH analysis in line current, where the rotor slot harmonics are limited by the motor structure and have small amplitude and poor signal to noise ratio (SNR), resulting in poor generality and accuracy. Aiming at the above problems, a method for inducing RSH with internal search coils is presented in this paper. By studying the contributory factor of SNR of RSH, the approaches of optimal design of search coils are proposed. Simulation and experiments were carried out on a 15-phase motor, and the results show that the SNR of RSH can be improved significantly and the proposed method has good precision.

Key words： Induction motor rotor slot harmonic search coils demodulation speed estimation

收稿日期: 2018-06-20 出版日期: 2018-12-29

PACS:

TM346+.2

基金资助:

基金项目国家自然科学基金重大项目资助（51507181）

通讯作者: 王东男,1978年生,博士,教授,博士生导师,研究方向为集成化发电技术、电力推进技术、独立电源系统等。E-mail: wangdong1@vip.sina.com

作者简介: 张逸超男,1994年生,硕士研究生,研究方向为电力推进技术。E-mail: 15972962439@163.com

引用本文:

张逸超, 王东, 易新强, 胡靖华, 孟繁庆. 用于感应电机转速估计的感应线圈设计方法[J]. 电工技术学报, 2018, 33(24): 5760-5767. Zhang Yichao, Wang Dong, Yi Xinqiang, Hu Jinghua, Meng Fanqing. Design Method of Search Coils for Induction Motor Speed Estimation. Transactions of China Electrotechnical Society, 2018, 33(24): 5760-5767.

链接本文:

https://dgjsxb.ces-transaction.com/CN/10.19595/j.cnki.1000-6753.tces.181059 https://dgjsxb.ces-transaction.com/CN/Y2018/V33/I24/5760

[1] 尹忠刚, 张延庆, 杜超, 等. 基于双辨识参数全阶自适应观测器的感应电机低速性能[J]. 电工技术学报, 2016, 31(20): 111-121.Yin Zhonggang, Zhang Yanqing, Du Chao, et al. Low-speed performance of sensorless vector control for induction motor based on two-parameter identified adaptive full-order observer[J]. Transactions of China Electrotechnical Society, 2016, 31(20): 111-121.
[2] 孙兴法, 聂子玲, 朱俊杰, 等. 基于低阶串行双扩展卡尔曼滤波的永磁直线同步电机无速度传感器控制策略[J]. 电工技术学报, 2018, 33(12): 2685- 2694.Sun Xingfa, Nie Ziling, Zhu Junjie, et al. A speed sensorless control strategy for a permanent magnet linear synchronous motor based on low-order serial dual extended Kalman filters[J]. Transactions of China Electrotechnical Society, 2018, 33(12): 2685-2694.
[3] 黄进, 赵力航, 刘赫. 基于二阶滑模与定子电阻自适应的转子磁链观测器及其无速度传感器应用[J]. 电工技术学报, 2013, 28(11): 54-61.Huang Jin, Zhao Lihang, Liu He. Sensorless control with resistance variation approach based on parallel MRAS and second-order sliding mode observer[J]. Transactions of China Electrotechnical Society, 2013, 28(11): 54-61.
[4] 张虎, 张永昌, 夏波, 等. 基于空间矢量调制的感应电机无速度传感器模型预测磁链控制[J]. 电工技术学报, 2017, 32(3): 97-104.Zhang Hu, Zhang Yongchang, Xia Bo, et al. Speed sensorless model predictive flux control of induction motor drives based on space vector modulation[J]. Transactions of China Electrotechnical Society, 2017, 32(3): 97-104.
[5] 王立国, 郝宏海, 吕辛, 等. 基于转子槽谐波分析的潜油电机温度辨识[J]. 电工技术学报, 2011, 26(6): 1-6.Wang Liguo, Hao Honghai, Lü Xin, et al. Temperature identification of electric submersible motors based on analysis of rotor slot harmonics[J]. Transactions of China Electrotechnical Society, 2011, 26(6): 1-6.
[6] 邱鑫, 黄文新, 卜飞飞. 内置式永磁同步电机宽转速范围无位置传感器直接转矩控制[J]. 电工技术学报, 2014, 29(9): 92-99.Qiu Xin, Huang Wenxin, Bu Feifei. Sensorless direct torque control of interior permanent magnet synchronous machines over wide speed range[J]. Transactions of China Electrotechnical Society, 2014, 29(9): 92-99.
[7] 秦峰, 贺益康, 刘毅, 等. 两种高频信号注入法的无传感器运行研究[J]. 中国电机工程学报, 2005, 25(5): 116-121.Qin Feng, He Yikang, Liu Yi, et al. Comparative investigation of sensorless control with two high- frequency signal injection schemes[J]. Proceedings of the CSEE, 2005, 25(5): 116-121.
[8] Briz F, Degner M W, Garcia P, et al.Comparison of saliency-based sensorless control techniques for AC machines[J]. IEEE Transactions on Industry Appli- cations, 2004, 40(4): 1107-1115.
[9] Guldmir H, Bradley K J.The effect of rotor design on rotor slot harmonics in induction machines[J]. Electric Machine & Power Systems, 2001, 29(9): 771-788.
[10] Ferrah A, Hogben-Laing P J, Bradley K J, et al. The effect of rotor design on sensorless speed estimation using rotor slot harmonics identified by adaptive digital filtering using the maximum likelihood approach[C]//IAS Meeting, Conference Record of the IEEE, New Orleans, LA, USA, 1997, 1: 128-135.
[11] Zinger D, Profumo F, lipo T A, et al. A direct field oriented controller for induction motor drives using tapped stator windings[J]. IEEE Transactions on Power Electronics, 1990, 5(4): 446-453.
[12] Keysan O, Ertan H B.Real-time speed and position estimation using rotor slot harmonics[J]. IEEE Transactions on Industrial Informatics, 2013, 9(2): 899-908.
[13] Zhao Lihang, Huang Jin, Hou Zhaowen, et al.Induction motor speed estimation based on rotor slot effects[C]//IEEE Energy Conversion Congress and Exposition, Pittsburgh, PA, USA, 2014: 3578-3583.
[14] Gao Z, Turner L, Colby R S, et al.A frequency demodulation approach to induction motor speed detection[J]. IEEE Transactions on Industry Appli- cations, 2011, 47(4): 1632-1642.
[15] 陈世坤. 电机设计[M]. 北京: 机械工业出版社, 2000.
[16] Keysan O, Ertan H B.Speed & position estimation by demodulating rotor slot harmonics[C]//XIX Inter- national Conference on Electrical Machines, Rome, Italy, 2010: 1-6.