基于主动脉冲的MMC-HVDC单极接地故障测距

摘要
图/表
参考文献
相关文章 (11)

全文: PDF (2389 KB)
输出: BibTeX | EndNote (RIS)

摘要准确可靠的故障测距技术对模块化多电平柔性直流输电系统(MMC-HVDC)故障恢复至关重要。通过分析MMC子模块控制特性,提出基于子模块控制的MMC主动式脉冲产生原理,进而通过检测脉冲发出时间和反射脉冲到达监测点的时间,提出基于主动式脉冲的MMC-HVDC单极接地故障测距方法。针对脉冲到达时刻的精确检测问题,采用基于二分递推奇异值分解(SVD)的脉冲到达时刻检测方法;进一步利用主动式脉冲方法进行在线波速的测定,最后给出了MMC-HVDC主动式脉冲故障测距的流程。该主动式脉冲单端测距方法利用换流器子模块产生脉冲,不需要额外增加设备,并且不受过渡电阻影响,可多次进行测量,提高了故障检测的准确度和可靠性。仿真结果表明单端主动式脉冲测距方法能够对MMC-HVDC线路的单极接地故障进行准确定位,提高了单端测距的可靠性和准确度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王帅
	毕天姝
	贾科

关键词 ：模块化多电平柔性直流输电, 故障测距, 主动式脉冲, 二分递推奇异值分解

Abstract：Fault location technology plays an important role in fault recovery of modular multilevel converter high voltage direct current (MMC-HVDC) system. Active pulse generation principle based on submodule control is proposed by analyzing the characteristics of MMC submodule. And then a single terminal fault location method using active pulse is proposed in this paper. Meanwhile dichotomizing recursion singular value decomposition (SVD) is used to detect the accurate arrival time of active pulse. In order to reduce the impact of the active pulse traveling speed on fault location, active pulse method is utilized to detect the travelling speed of the active pulse. The proposed active pulse method does not require additional equipment and the method is not influenced by transition resistance. Fault location can be repeated since the pulse can be sent repeatedly. The simulation results show that the proposed method can locate the grounding point of MMC-HVDC and the reliability and accuracy are improved.

Key words： Modular multilevel converter HVDC fault location active pulse dichotomizing recursion singular value decomposition

收稿日期: 2015-11-27 出版日期: 2017-01-19

PACS:

TM77

基金资助:国家重点基础研究发展计划(973计划)(2012CB215206)和高等学校学科创新引智计划(B08013)资助项目。

作者简介: 王帅男,1983年生,博士研究生,研究方向为柔性直流输电系统保护技术等。 E-mail:wings_ws@126.com 毕天姝女,1973年生,博士,教授,研究方向为电力系统保护与控制、广域同步相量测量技术及其应用等。 E-mail:tsbi@ncepu.edu.cn

引用本文:

王帅, 毕天姝, 贾科. 基于主动脉冲的MMC-HVDC单极接地故障测距[J]. 电工技术学报, 2017, 32(1): 12-19. Wang Shuai,Bi Tianshu,Jia Ke. Single Terminal Fault Location for MMC-HVDC Transmission Line Using Active Pulse. Transactions of China Electrotechnical Society, 2017, 32(1): 12-19.

链接本文:

https://dgjsxb.ces-transaction.com/CN/Y2017/V32/I1/12

[1] 彭浩,邓焰,王莹,等.模块化多电平变换器模型及稳态特性研究[J].电工技术学报,2015,30(12):120-127.
Peng Hao,Deng Yan,Wang Ying,et al.Research about the model and steady-state performance for modular multilevel converter[J].Transactions of China Electrotechnical Society,2015,30(12):120-127.
[2] 张建坡,赵成勇,孙海峰,等.模块化多电平换流器改进拓扑结构及其应用[J].电工技术学报,2014,29(8):173-179.
Zhang Jianpo,Zhao Chengyong,Sun Haifeng,et al.Improved topology of modular multilevel converter and application[J].Transactions of China Electrotechnical Society,2014,29(8):173-179.
[3] 陈仕龙,张杰,毕贵红,等.一种基于高频量衰减特性的特高压直流输电线路故障测距方法[J].电力系统保护与控制,2014,42(10):77-83.
Chen Shilong,Zhang Jie,Bi Guihong,et al.A fault location method based on high frequency attenuation characteristic of UHVDC transmission line[J].Power System Protection and Control,2014,42(10):77-83.
[4] 陈仕龙,谢佳伟,毕贵红.一种特高压直流输电线路神经网络双端故障测距新方法[J].电工技术学报,2015,30(4):257-264.
Chen Shilong,Xie Jiawei,Bi Guihong,et al.A novel two terminal fault location method used ANN for UHVDC transmission line[J].Transactions of China Electrotechnical Society,2015,30(4):257-264.
[5] 李博雅,杨耀,杨立红.高压直流输电线路单端故障测距组合算法[J].电力系统保护与控制,2014,42(3):116-121.
Li Boya,Yang Yao,Yang Lihong.A combined method of single-ended fault location for HVDC transmission lines[J].Power System Protection and Control,2014,42(3):116-121.
[6] 张广斌,束洪春,于继来,等.不依赖双侧时钟同步的输电线双端行波测距[J].电工技术学报,2015,30(20):199-209.
Zhang Guangbin,Shu Hongchun,Yu Jilai,et al.Double-ended travelling wave fault location independent of two side time synchronization [J].Transactions of China Electrotechnical Society.2015,30(20):199-209.
[7] 李德坤,宋国兵,高淑萍,等.VSC-HVDC输电线路单端行波自动化故障定位方法研究[J].电网技术,2013,37(4):1128-1133.
Li Dekun,Song Guobing,Gao Shuping,et al.Study on automatic fault location for VSC-HVDC transmission lines based on one-terminal traveling wave[J].Power System Technology,2013,37(4):1128-1133.
[8] 姜晟,舒乃秋,胡芳,等.基于小波变换的含噪声行波信号奇异点检测[J].电网技术,2004,28(10):59-62.
Jiang Cheng,Shu Naiqiu,Hu Fang,et al.A wavelet transform based singularity detection of traveling wave signal containing noise[J].Power System Technology,2004,28(10):59-62.
[9] 马丹丹,王晓茹.基于小波模极大值的单端行波故障测距[J].电力系统保护与控制,2009,37(3):55-59.
Ma Dandan,Wang Xiaoru.Single terminal methods of traveling wave fault location based on wavelet modulus maxima[J].Power System Protection and Control,2009,37(3):55-59.
[10]许珉,杨艳伟,申克运,等.基于小波变换的电缆短距离开路故障测距[J].电力系统保护与控制,2013,41(4):112-116.
Xu Min,Yang Yanwei,Shen Keyun,et al.Cable short open-circuit fault location based on wavelet transform[J].Power System Protection and Control,2013,41(4):112-116.
[11]赵学智,叶邦彦.SVD和小波变换的信号处理效果相似性及其机理分析[J].电子学报,2008,36(8):1582-1589.
Zhao Xuezhi,Ye Bangyan.The similarity of signal processing effect between SVD and wavelet transform and its mechanism analysis[J].Acta Electronica Sinica,2008,36(8):1582-1589.
[12]赵学智,叶邦彦.基于二分递推SVD 的信号奇异性位置精确检测[J].电子学报,2012,40(1):53-59.
Zhao Xuezhi,Ye Bangyan.Accurate detection of signal singularity position based on dichotomizing recursion SVD[J].Acta Electronica Sinica,2012,40(1):53-59.
[13]何正友,钱清泉.电力系统暂态信号分析中小波基的选择原则[J].电力系统自动化,2003,27(10):45-48.
He Zhengyou,Qian Qingquan.Mother wavelet option method in the transient signal analysis of electric power systems[J].Automation of Electric Power Systems,2003,27(10):45-48.
[14]Lehtola L,Karsikas M,Koskinen M,et al.Effects of noise and filtering on SVD based morphological parameters of the T wave in the ECG[J].Journal of Medical Engineering & Technology,2008,32(5):400-407.
[15]赵学智,叶邦彦,陈统坚.基于SVD 的奇异性信号检测原理及其应用[J].振动与冲击,2008,27(6):11-15.
Zhao Xuezhi,Ye Bangyan,Chen Tongjian.Principle of singularity detection based on SVD and its application[J].Journal of Vibration and Shock,2008,27(6):11-15.