Abstract：In order to study the value and distribution characteristics of core losses in amorphous alloy permanent magnet synchronous motor under different supply modes including sinusoidal voltage supply, vector control(VC) inverter supply and direct torque control(DTC) inverter supply, the loss curves of ring-type amorphous alloy stack core under different frequencies are obtained by experiments firstly. Then, by taking an 8 poles, 36 slots motor as an example, the stator core is divided into four areas which are yoke, tooth bodies, tooth top and tooth root. Time-stepping finite element method is adopted to analyze core loss distributions in different areas at no-load condition with different supply modes. The distribution characteristics of rotor losses are also investigated. It is found that core losses whose percentage is over 37% mainly distribute in yoke and tooth bodies, and the area of tooth root is relatively small, while the loss in tooth top is the minimum compared with the other areas owning to its small volume. Compared with VC, the stator core loss is increased by 24.7%, and the rotor core loss is increased by 36.7%, and eddy current loss in permanent magnets is increased by 7.8% under the condition of DTC. Finally, the accuracy of calculated results is verified by experiments.
[1] 张广强, 周少雄, 王立军, 等. 非晶电机的优势及其研究进展[J]. 微特电机, 2011, 39(3): 73-75. Zhang Guangqiang, Zhou Shaoxiong, Wang Lijun, et al. Advantages and research progress of amorphous alloy motors[J]. Small and Special Electrical Machines, 2011, 39(3): 73-75. [2] 袁丽卿, 钟德刚, 陈永校. 非晶合金电机及其发展前景[J]. 微特电机, 2004, 32(4): 34-36. Yuan Liqing, Zhong Degang, Chen Yongxiao. Amor- phous metal motor and its prospects[J]. Small and Special Electrical Machines, 2004, 32(4): 34-36. [3] 王立军, 张广强, 李山红等. 铁基非晶合金应用于电机铁芯的优势及前景[J]. 金属功能材料, 2010, 17(5): 58-62. Wang Lijun, Zhang Guangqiang, Li Shanhong, et al. Advantages and prospects of Fe-based amorphous alloy materials applied in motor iron core[J]. Metallic Functional Materials, 2010, 17(5): 58-62. [4] Johnson L A, Cornell E P, Bailey D J, et al. Applica- tion of low loss amorphous metals in motors and transformers[J]. IEEE Transactions on Power Apparatus and Systems, 1982, 101(7): 2109-2114. [5] Maria Dems, Krzysztof Komeza. Performance character- ristics of a high-speed energy-saving induction motor with an amorphous stator core[J]. IEEE Transactions on Industry Electronics, 2014, 61(6): 3046 -3055. [6] Tarımer S Arslan, Güven M E. Investigation for losses of M19 and amorphous core materials asynchronous motor by finite elements methods[J]. Elektronika ir Elektrotechnika, 2012, 18(9): 1392-1215. [7] Leng Jianwei, Qi Xiaohui. The high frequency cha- racteristic of amorphous iron induction motor[C]. Computer and Communication Technologies in Agri- culture Engineering, 2010. [8] Wang Zhuonan, Masaki Ryoso. Development of an axial gap motor with amorphous metal cores[J]. IEEE Transactions on Industry Application, 2011, 47(3): 1293-1299. [9] Wang Zhuonan, Enomoto Yuji, Masaki Ryoso, et al. Development of a high speed motor using amorphous metal cores[C]. Eighth International Conference on Power Electronics, 2011. [10] 辜承林, 陈乔夫, 熊永前. 电机学[M]. 武汉: 华中科技大学出版社, 2010. [11] 李耀华, 刘卫国. 永磁同步电机矢量控制与直接转矩控制比较研究[J]. 电气传动, 2010, 40(10): 9-12. Li Yaohua, Liu Weiguo. Comparison of the VC and DTC for the PMSM[J]. Electric Drive, 2010, 40(10): 9-12. [12] 江善林. 高速永磁同步电机的损耗分析与温度场计算[D]. 哈尔滨: 哈尔滨工业大学, 2010. [13] Bertotti G. General properties of power losses in soft ferromagnetic material[J]. IEEE Transactions on Magnetics, 1988, 24(1): 621-630. [14] 赵海森, 罗应立, 刘晓芳, 等. 异步电机空载铁耗分布的时步有限元分析[J]. 中国电机工程学报, 2010, 30(30): 99-106. Zhao Haisen, Luo Yingli, Liu Ruifang, et al. Analysis on no-load iron losses distribution of asynchronous motors with time-stepping finite element method[J]. Proceedings of the CSEE, 2010, 30(30): 99-106. [15] GB/T3658—2008. 软磁材料交流磁性能环形试样的测试方法[S]. 中华人民共和国国家标准, 2008.
2015, Vol. 30 
