Study on Optimization Design of the Cooling System of Lithium-Ion Battery on Electric Vehicles
Zeng Jianhong1, 2, Wang Lifang1, Liao chenglin1
1. Key Laboratory of Power Electronics & Electric Drives, Institute of Electrical Engineering Chinese Academy of Science Beijing 100190 China; 2. University of Chinese Academy of Sciences Beijing 100190 China
Abstract:In order to explore a good thermal management solution, the internal structure of a lithium-ion battery module which shape is a regular cube is optimization designed. Three optimization methods are proposed by changing the descending mode of the ventilation slots of the plate which is in the wind zone at the top of the box, changing the inclination angle of the plate and changing the position of the export. The 3-D model of the box is established and meshed by Gambit, and the CFD simulation is completed with Fluent. The temperature contours and the maximum temperature of the center-section of the batteries are showed. The comparison and evaluation indicate that the methods of changing the descending mode of the plate and changing the position of the export can reduce the temperature gradient of the box, which can improve the uniformity of the temperature of the batteries. While there is obvious effect of reducing the maximum temperature of the batteries by changing the inclination angle of the plate.
曾建宏, 王丽芳, 廖承林. 电动汽车锂离子动力电池散热系统优化设计[J]. 电工技术学报, 2013, 28(1增): 24-29.
Zeng Jianhong, Wang Lifang, Liao chenglin. Study on Optimization Design of the Cooling System of Lithium-Ion Battery on Electric Vehicles. Transactions of China Electrotechnical Society, 2013, 28(1增): 24-29.
[1] Song Y H, Yang X, Lu Z X, et al. Integration of plug-in hybrid and electric vehicles: experience from China[C]. Proceedings of the Power & Engineering Society General Meeting, Minneapolis, MN, USA, 2010: 1-5. [2] Ferdowsi M. Vehicle fleet as a distributed energy storage system for the power grid[C]. Proceedings of the IEEE Power & Engineering Society General Meeting, Calgary, Canada, 2009: 1-2. [3] Saber A Y, Venayagamoorthy G K. Optimization of vehicle-to-grid scheduling in constrained parking lots[C]. Proceedings of the IEEE Power & Engineering Society General Meeting, Calgary, Canada, 2009: 1-8. [4] 李腾, 林成涛, 陈全世. 锂离子电池热模型研究进展[J]. 电源技术. 2009, 33(10): 927-932. Li Teng, Lin Chengtao, Chen Quanshi. Research development on lithium-ion battery thermal model[J]. Power Technology. 2009, 33(10): 927-932. [5] Giuliano Michael R, Advani Suresh G, Prasad Ajay K. Thermal analysis and management of lithium- titanate batteries[J]. Journal of Power Sources. 2011(196): 6517-6524. [6] Keyser M, Mihalic M, Pesaran A. Thermal characterization of plastic lithium ion cells[C]. Proceedings of the 18th International Seminar and Exhibit on Primary and Secondary Batteries. Fort Lauderdale, Florida: Advanced Battery Technology, 2001. [7] Ghosh Debashis, Maguire Patrick D, Zhu Douglas X. Design and CFD simulation of a battery module for a hybrid electric vehicle battery pack[C]. Proceedings of the Engineering Meetings Board, 2009: 1386-1395. [8] 黎林. 纯电动汽车用锂电池管理系统的的研究[D]. 北京: 北京交通大学, 2009. [9] 车杜兰, 周荣, 乔维高. 电动汽车电池包热管理系统设计方法[J]. 汽车工程师, 2009(10): 28-30. Che Dulan, Zhou Rong, Qiao Weigao. Design method of battery thermal management system on EV[J]. Auto Engineer, 2009(10): 28-30. [10] 吴伯荣, 屠海令, 吴锋, 等. MH/Ni电池组热管理的数值模拟与应用试验[J]. 电池. 2006, 36(4): 299-301. Wu Borong, Tu Hailing, Wu Feng, et al. Numerical simulation and application experiment of thermal management of Ni/ MH battery pack[J]. Battery Bimonthly. 2006, 36(4): 299-301. [11] 陈磊涛, 许思传, 常国峰. 混合动力汽车动力电池热管理系统流场特性研究[J], 汽车工程. 2009, 31(3): 224-227. Chen Leitao, Xu Sichuan, Chang Guofeng. A study on the flow field characteristics of HEV battery thermal management system[J]. Automotive Engineering. 2009, 31(3): 224-227. [12] 郭炳, 王先友, 肖立新, 等. 锂离子电池[M]. 长沙, 中南大学出版社. 2002. [13] 陶文铨. 数值传热学[M]. 西安, 西安交通大学出版社.2009.