Abstract：Based on the structure parameter and operating principle of the cooling system of traction converter for high-speed electric multiple units (EMUs), a finite element model of air heat exchanger is built. Then the simulation including temperature field and fluid field is done. In order to verify the ability of the cooling system, a thermal capacity test rig for the traction converter is built. With the test rig, the temperature rise of traction converter and supply air volume of cooling system are measured in Wu-Guang high speed railway. The results show that when the high speed EMUs running in high speed, the supply air volume of cooling system will decrease, and the cooling system of traction converter for CRH3 EMUs can meet the requirements when the train continuous running in 330km/h. The simulated results are verified by the test results. The test and investigation on the thermal capacity of traction converter for high speed EMUs are firstly developed in China which makes a contribution to the design of the new generation high speed EMUs.
刘建强, 郑琼林, 郭超勇, 游小杰. 高速动车组牵引变流器热容量[J]. 电工技术学报, 2011, 26(10): 205-210.
Liu Jianqiang, Trillion Q. Zheng, Guo Chaoyong, You Xiaojie. Thermal Capacity of Traction Converter of High Speed Electric Multiple Units. Transactions of China Electrotechnical Society, 2011, 26(10): 205-210.
[1] Charboneau B C, Wang Fei, Wyk Van, et al. Double- sided liquid cooling for power semiconductor devices using embedded power packaging[J]. IEEE Transactions on Industry Applications, 2008, 44(5): 1645-1655. [2] 曾攀. 有限元基础教程[M]. 北京: 高等教育出版社, 2007. [3] Gerstenmaier Y C, Castellazzi A, Wachutka G K M. Electrothermal simulation of multichip-modules with novel transient thermal model and time-dependent boundary conditions[J]. IEEE Transactions on Power Electronics, 2006, 21(1): 45-55. [4] Lasance C. Special section on compact thermal modeling[J]. IEEE Transactions on Components and Packaging Technologies, 2003, 26(1): 134-135. [5] 王福军. 计算流体动力学分析—CFD软件原理与应用[M]. 北京: 清华大学出版社, 2005. [6] 李伟力, 杨雪峰, 顾德宝, 等. 多风路空冷汽轮发电机定子内流体与传热耦合计算分析[J]. 电工技术学报, 2009, 24(12): 24-31. [7] Desai P H, Wiegner G. Evaluation of freon modules for power electronics designed for a locomotive traction drive[J]. IEEE Transactions on Industry Applications, 1990, 26(3): 394-400. [8] Liu Xingsheng, Hu M H, Caneau C G, et al. Thermal management strategies for high power semiconductor pump lasers[J]. IEEE Transactions on Components and Packaging Technologies, 2006, 29(2): 268-276. [9] Fowler K. Heat transfer and cooling[J]. IEEE Instrumentation & Measurement Magazine, 2001, 4(1): 48-51. [10] 陶文铨. 数值传热学[M]. 西安: 西安交通大学出版社, 2001. [11] 梁习峰, 王宝金, 赵建农. 高速列车牵引电机冷却风机风量实车测量方法研究[J]. 流体机械, 2003, 31(2): 5-9. [12] 梁习峰, 武传田. 高速列车牵引电机冷却风机流量实车试验研究[J]. 铁道学报, 2004, 26(2): 38-41.
2011, Vol. 26 
