Abstract:Different drive strategies on permanent magnet brushless DC motor, driving the motor with essentially rectangular phase current(BLDC)or with essentially sinusoidal phase current (BLAC) is analyzed, and then the influences of drive strategies on the loss of motor is also studied in this paper. It proposes that: in BLAC mode the loss is the minimum when the current leading angel is zero, and in BLDC mode when the motor is with the optimal commutation advance angle control. Finally, this paper studies the losses both with optimal commutation advance angle control and with #em/em#d=0 FOC control in test.
邹继斌, 李建军, 徐永向, 魏延羽. 驱动方式对永磁无刷直流电机损耗的影响[J]. 电工技术学报, 2011, 26(9): 43-47.
Zou Jibin, Li Jianjun, Xu Yongxiang, Wei Yanyu. Influences of Drive Strategies on the Loss of Permanent Magnet Brushless Direct Current Motor. Transactions of China Electrotechnical Society, 2011, 26(9): 43-47.
[1] Shi Y F, Zhu Z Q, Howe D. Torque-speed characteristics of interior-magnet machines in brushless AC and DC modes, with particular reference to their flux-weakening performance[C]. Power Electronics and Motion Control Conference, 2006: 1-5. [2] 邱建琪. 永磁无刷直流电动机转矩脉动抑制的控制策略研究[D]. 杭州: 浙江大学, 2002. [3] 徐永向. 单霍尔传感器高速永磁同步电机的控制与转子损耗研究[D]. 哈尔滨: 哈尔滨工业大学, 2005. [4] Sung In Park, Tae Sung Kim, Sung Chan Ahn, et al. An improved current control method for torque improvement of high-speed BLDC motor[C]. Applied Power Electronics Conference and Exposition, 2003: 294-299. [5] 唐任远. 现代永磁电机理论与设计[M]. 北京: 机械工业出版社, 1997. [6] Zhou Fengzheng, Shen Jianxin. Study of retaining sleeve and conductive shield and their influence on rotor loss in high-speed PM BLDC motors[J]. IEEE Trans. Magn., 2006, 42(10): 3398-3400. [7] Zhu Z Q, Ng K, Schofield N, et al. Improved analytical modeling of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets[J]. Inst. Elect. Eng. Proc. Electr. Power Appl, 2004, 151(6): 641-650. [8] Deng F. Improved analytical modeling of commutation losses including space harmonic effects in permanent magnet brushless DC motors[C]. Proc. Int. Conf. on Electrical Machines and Drives, 1997.