Abstract：The model of 3D transient temperature field for a permanent magnet-induction hybrid excitation generator(PM-IHEG) in the state of steady electromagnetic field is established. Some hypothetical conditions and boundary conditions of the solved region are presented. Lots of coefficients of thermal conductivity and surface heat transfer are given. Stator iron losses, windings copper losses, rotor eddy current loss and mechanical losses are calculated according to the electromagnetic field analysis. The temperature field of PM-IHEG is calculated using 3D FEM. The influences of the exciting current, speed and load on the temperature field are also analyzed by means of numerical method. The calculation and practical measurements results are in satisfactory agreement.
付兴贺, 林明耀, 徐妲, 房淑华. 永磁-感应子式混合励磁发电机三维暂态温度场的计算与分析[J]. 电工技术学报, 2013, 28(3): 107-113.
Fu Xinghe, Lin Mingyao, Xu Da, Fang Shuhua. Computation and Analysis of 3D-Transient Temperature Field for a Permanent Magnet-Induction Hybrid Excitation Generator. Transactions of China Electrotechnical Society, 2013, 28(3): 107-113.
[1] Fodorean D, Miraoui A. Permanent magnets thermal operation limits in a hybrid excited synchronous machine used on wide speed applications[C]. IEEE International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, 2008: 21-26. [2] Hoang E, Lecrivain M, Gabsi M. 3-D thermal model of an hybrid excitation flux switching synchronous machine using a 2-D FE method software[C]. International Symposium on Power Electronics Electrical Drives Automation and Motion, Pisa, Italy, 2010: 101-104. [3] Kolondzovski Z. Determination of critical thermal operations for high-speed permanent magnet electrical machines[J]. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2008, 27(4): 720-727. [4] Gerada D, Mebarki A, Mokhadkar R P, et al. Design issues of high-speed permanent magnet machines for high-temperature applications[C]. IEEE International Electric Machines and Drives Conference, Miami, FL, USA, 2009: 1036-1042. [5] Jiqiang W, Fengxiang W, Xiaoguang K. Losses and thermal analysis of high speed PM machine[C]. International Conference on Power System Technology, New Delhi, India, 2008: 1-5. [6] Aldo Boglietti, Andrea Cavagnino, David Staton, et al. Evolution and modern approaches for thermal analysis of electrical machines[J]. IEEE Transactions on Industrial Electronics, 2009, 56(3): 871-882. [7] 李俊卿. 采用混合单元的汽轮发电机定子温度场的分析与计算[J]. 中国电机工程学报, 2009, 29(18): 78-82. Li Junqing. Analysis and calculation on temperature field of turbo-generators with dual elements[J]. Proceedings of the CSEE[J]. 2009, 29(18): 78-82. [8] Kyle A Brucker, Joseph Majdalani. Equivalent thermal conductivity for compact heat sink models based on the churchill and chu correlation[J]. IEEE Transactions on Components and Packaging Technologies, 2003, 26(1): 158-164. [9] 胡敏强, 黄学良. 电机运行性能数值计算方法及其应用[M]. 南京: 东南大学出版社, 2003. [10] Kwon O. Analysis and experiment on the thermal characteristics of electric motors[D]. Berkeley: University of California, 2001.
2013, Vol. 28 
