Abstract:The values of arcing characteristics and the welding force of the Ag-based electrical contact material at 50Hz and 400Hz are introduced during the electrical contact current make-and-break test under low voltage, resistive load, small current by a developed ASTM contact material experimental system of small-capacity and variable frequency. By electricity-ray analytical balance, SEM and EDAX, the changes of the contact material weighing, the surface profile and micro-area constituent of AgNi, AgC and AgW contact materials are obtained and analysed.Study indicates that on the condition of low voltage, small current at 400Hz, the welding resistance and anti-burning of three kinds of silver-based materials—CAgC4, CAgW50 and CAgNi10—are all superior to the capacities at 50Hz. The capacities of arc erosion resistance of the silver-based alloys electrical contract materials whose second elements are different at 400Hz. Among them, the splash of CAgC4 is the most serious and it has the worst anti-erosion ability, the ability of CAgNi10 is second, the ability of CAgW50 is the best.
李靖, 马志瀛, 李建明, 黄绍平. 50Hz和400Hz下Ag基合金电触头材料的电弧侵蚀[J]. 电工技术学报, 2010, 25(8): 1-5.
Li Jing, Ma Zhiying, Li Jianming, Huang Shaoping. Arc Erosion of Silver-Based Alloy Electrical Contact Materials at 50Hz and 400Hz. Transactions of China Electrotechnical Society, 2010, 25(8): 1-5.
[1] 凯尔A, 默尔W A E. 电接触和电接触材料[M]. 北京: 机械工业出版社, 1993. [2] Vinaricky E, Beherens V Switching. Behavior of silver/graphite contact material in different atomasphere in regard to contact erosion eectrical contacts[C]. IEEE Proceedings of the Annual Holm Conference on Electrical Contacts, 1998: 292-300. [3] Behrens V, Michal R, Minkenberg J N, et al. Erosion mechanic of different types of Ag/Ni90/10 materials[C]. 14th IEEC, 1988: 417-422. [4] Liang B J, Zhang W S, et al. Influence of different micro-structure of AgNi material on their switching behavior[C]. Proc. of 1st IC-ECAAA, Xi’an, 1989: 197-201. [5] 李靖, 马志瀛, 张深基, 等. 中频开关电器触头材料耐弧侵蚀试验测试系统设计[J]. 低压电器, 2007(21): 12-15. [6] Chen Z. Material transfer and contact resistance deterioration in light duty electrial contact[D]. Tokyo: Keio University, 1995. [7] 荣命哲. 电接触理论[M]. 西安: 西安交通大学出版社, 2004. [8] Michal R, Karl E Saeger, et al. Metallurgical aspects of silver-based contact materials for air-break switching devices for power engineering [J]. IEEE Trans. on CHMT, 1989, 12(1): 71-81. [9] 万江文, 荣命哲, 王其平. 银基触头电弧侵蚀及气孔和裂纹产生机理[J]. 电工技术学报, 1997, 12(6): 1-5. [10] 郭凤仪, 王国强, 董讷, 等. 银基触头材料电弧侵蚀特性及裂纹形成机理分析[J]. 中国电机工程学报, 2004, 24(9): 209-211.