本质安全电路模拟储能元件潜在危险性分析及其本质安全判据

doi:10.19595/j.cnki.1000-6753.tces.201466

Abstract
Figure/Table
References
Related Citation (2)

Download: PDF (1974 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract For intrinsically safe circuits, if the circuit contains an active impedance conversion circuit, when judging the intrinsic safety performance of the circuit, not only the effect of physical inductance and physical capacitance, but also the affect of simulated inductance and simulated capacitance must be considered. Based on the analysis of the rationale of the simulated inductors and the simulated capacitors, this paper quantified and classified their "potential" hazards by calculating the energy of physical energy storage components and simulated energy storage components respectively. And on this basis, this paper used the reference curves and the data for evaluating the safety of intrinsically safe circuits, starting from the perspective of explosion-proof safety of intrinsically safe circuits. The intrinsic safety evaluation criteria of analog inductance and analog capacitor circuits are established, so as to achieve the purpose of correctly evaluating the impact of analog energy storage components on the explosion-proof safety of the intrinsically safety circuits.

Key words： Analog inductance analog capacitance intrinsically safe circuit evaluation criterion

Received: 01 November 2020

PACS:

TD685

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Meng Qinghai
	Tian Yuan

Cite this article:

Meng Qinghai,Tian Yuan. Analysis of Potential Hazards of Analog Energy Storage Components in the Intrinsic Safety Circuits and Their Intrinsic Safety Criteria[J]. Transactions of China Electrotechnical Society, 2022, 37(3): 676-685.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.201466 OR https://dgjsxb.ces-transaction.com/EN/Y2022/V37/I3/676

[1] 国家标准起草小组.中华人民共和国国家标准GB3836.4—2010爆炸性气体环境用电气设备第4部分:由本质安全全“i”保护的设备[S]. 北京: 中国标注出版社, 2010.
[2] 孟庆海, 王进己. 本质安全电感电路电弧放电时间双正态分布[J]. 电工技术学报, 2017, 32(2): 125-130.
Meng Qinhai, Wang Jinji.Dual normal distribution of arc discharge time for inductive intrinsically safe circuits[J]. Transactions of China Electrotechnical Society, 2017, 32(2): 125-130.
[3] 杨玉岗, 祁鳞, 吴建鸿. 三相交错并联磁集成Boost变换器的内部本质安全特性[J]. 电工技术学报, 2014, 29(4): 54-62.
Yang Yugang, Qi Lin, Wu Jianhong.Analysis of inner-intrinsic safety for three-phase interleaving magnetic integrated Boost converter[J]. Transactions of China Electrotechnical Society, 2014, 29(4): 54-62.
[4] 孟庆海, 牟龙华, 王崇林, 等. 本质安全电路的功率判别式[J]. 中国矿业大学学报, 2004, 33(3): 58-60.
Meng Qinghai, Mou Longhua, Wang Chonglin.Electric power criterion of intrinsic safe circuits[J]. Journal of China University of Mining & Technology, 2004, 33(3): 58-60.
[5] 钟久明, 刘树林, 崔强. IEC火花试验装置的电容短路放电特性数学仿真分析[J]. 电工电能新技术, 2014, 33(2): 32-37.
Zhong Jiuming, Liu Shulin, Cui Qiang.Short circuit discharge behavior of capacitive circuit and its mathematical simulation analysis[J]. Advanced Technology of Electrical Engineering and Energy, 2014, 33(2): 32-37.
[6] 张力. 模拟电感、模拟电容在本安电路中的存在及其潜在危险性的理论探讨[J]. 爆炸性环境电气防爆技术, 1996(2): 3-5.
Zhang Li.The oretical discussion on the existence and potential hazard of analog inductance and analog capacitance in the intrinsically safe circuits[J]. Electric Explosion Protection, 1996(2): 3-5 .
[7] Antoniou A.Gyrator using operational amplifiers[J]. Electronics Letters, 1967, 3(8): 350-352.
[8] Berndt D f, Roy S. Inductor simulation using a single unity gain amplifier[J]. IEEE Journal of Solid-State Circuits, 1969, 4(3): 161-162.
[9] 郭振杰, 张万荣, 金冬月, 等. 基于有源电感的全集成超宽带低噪声放大器[J]. 微电子学, 2013, 43(3): 316-320.
Guo Zhenjie, Zhang Wanrong, Jin Dongyue.Fully-integrated ultra-wideband LNA with active inductor[J].Microelectronics, 2013, 43(3): 316-320.
[10] Lü Yingchao, Ji Haifeng, Yang Shijie, et al.New C4D sensor with a simulated inductor[J] Sensors(Basel, Switzerland), 2016, 16(2):165.
[11] Lü Yingchao, Huang Junchao, Huang Zhiyao.Study on the application of simulated inductor technique to the design of C4D sensor[J]. Sensors and Actuators A: Physical, 2017, 264(1): 195-204.
[12] 徐曙, 张万荣, 谢红云, 等. 一种电感值可独立调节的低噪声有源电感[J]. 微电子学, 2020, 50(2): 272-275, 280.
Xu Shu, Zhang Wanrong, Xie Hongyun, et al.A low noise active inductor with independently adjustable inductance values[J]. Microelectronices, 2020, 50(2): 272-275, 280.
[13] 杨志民, 任文娟, 张洁, 等. 基于阻抗变换器的几种仿真电感的性能研究[J]. 西北师范大学学报(自然科学版), 2010, 46(3): 51-55, 88.
Yanng Zhiming, Ren Wenjuan, Zhang Jie, et al.Study of simulated inductors based on the impedance converter[J]. Journal of Northwest Normal University (Natural Science), 2010, 46(3): 51-55, 88.
[14] 孙逊, 李桂花. 模拟电感的等效电路模型及其应用初探[J]. 应用技术学报, 2018, 18(2): 179-183.
Sun Xun, Li Guihua.Simulated inductor equivalent circuit model and its preliminary application[J]. Journal of Technology, 2018, 18(2): 179-183.
[15] 杨光辉, 张曙霞, 蒋宇中. 中心频率可调节的超低频带通滤波器设计[J]. 火力与指挥控制, 2019, 44(7): 151-155.
Yang Guanghui,Zhang Shuxia,Jiang Yuzhong.Design of ultra-low frequency band-pass filter with adjustable center frequency[J]. Fire Control & Command Control, 2019, 44(7): 151-155.
[16] Senani R, Singh A K, Gupta A, et al.Simple simulated inductor, low-pass/band-pass filter and sinusoidal oscillator using OTRA[J]. Circuits and Systems, 2016, 7(3): 83-99.
[17] 刘树林, 郝雨蒙, 李艳, 等. 基于最大功率的本安Buck变换器设计方法[J]. 电工技术学报, 2021, 36(3): 542-551.
Liu Shulin, Hao Yumeng, Li Yan, et al.Design methods of intrinsically safe Buck converter based on the maximum output power[J]. Transactions of China Electrotechnical Society, 2021, 36(3): 542-551.
[18] B. C.柯拉夫钦克, 杨洪顺. 电气放电和磨檫火花的防爆性[M]. 北京: 煤炭工业出版社, 1990.