利用熄弧后暂态信息测量谐振接地系统的对地电容

doi:10.19595/j.cnki.1000-6753.tces.191178

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1266 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Accurate measurement of capacitance to ground of the system involves a series of problems such as capacity allocation of arc suppression coil, compensation adjustment, control of residual current at fault point, etc. By using the equivalent circuit of single-phase grounding fault in resonant grounding system, the electrical characteristics of the fault point after arc extinguishing are analyzed. It is found that the transient process after arc extinguishing is the underdamped series resonance process between the inductance of arc suppression coil and the capacitance to ground. The system detuning degree can be calculated by the parameters of resonance frequency and damping factor. Then the capacitance or capacitance current of the system can be calculated according to compensation inductance, which includes zero-sequence inductance of arc suppression coil and grounding transformer. The error of this method is related to the error of resonance frequency, damping factor and compensation inductance. But it mainly depends on the error of compensation inductance. The validity and accuracy of the method are verified by simulation and field data. As a passive measurement method, this method needs no special equipment or adjustment of the operation status of existing equipment, it has high security and provides a new idea for capacitive current measurement of resonant grounding system.

Key words： Resonant grounding system capacitance current measurement arc extinguishing transient detuning degree

Received: 17 September 2019 Published: 07 April 2020

PACS:

TM930.1

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Xue Yongduan
	Li Guang
	Xu Bingyin

Cite this article:

Xue Yongduan,Li Guang,Xu Bingyin. Measuring Method of Capacitance to Ground in Resonant Grounding System Based on Transient Information after Arc Extinguishing[J]. Transactions of China Electrotechnical Society, 2020, 35(7): 1521-1528.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.191178 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/I7/1521

[1] 曲轶龙. 全补偿消弧线圈及其控制方法的研究[D].北京: 华北电力大学, 2008.
[2] 何颋. 自动调谐消弧线圈投入引起谐振过电压的原因[J]. 高电压技术, 2007, 33(9): 216-217.
He Ting.The cause of resonant overvoltage caused by auto-tuned arc suppression coil input[J]. High Voltage Engineering, 2007, 33(9): 216-217.
[3] 赵仁德, 李乾, 徐海亮, 等. 脉冲宽度调制并网变换器电网背景谐波电流的抑制[J]. 电工技术学报, 2018, 33(增刊2): 558-566.
Zhao Rende, Li Qian, Xu Hailiang, et al.Grid background harmonic current suppression for grid-connected PWM converters[J]. Transactions of China Electrotechnical Society, 2018, 33(S2): 558-556.
[4] 吴继维, 童晓阳, 廖小君, 等. 基于零序差动阻抗的输电线路保护新原理研究[J]. 电力系统保护与控制, 2017, 45(10): 11-17.
Wu Jiwei, Tong Xiaoyang, Liao Xiaojun, et al.Transmission line protection principle based on zero sequence differential impedance[J]. Power System Protection and Control, 2017, 45(10): 11-17.
[5] 贾清泉, 王振宇, 王宁, 等. 基于参数辨识的消弧线圈接地电网单相接地故障测距方法[J]. 电工技术学报, 2016, 31(23): 77-85.
Jia Qingquan, Wang Zhenyu, Wang Ning, et al.A single-phase-to-ground fault locating algorithm for arc-suppression-coil earthed power distribution systems based on parameter estimation[J]. Transactions of China Electrotechnical Society, 2016, 31(23): 77-85.
[6] 周兴达, 陆帅. 一种基于消弧线圈和静止同步补偿器协同作用的配电网消弧结构与方法[J]. 电工技术学报, 2019, 34(6): 1251-1262.
Zhou Xingda, Lu Shuai.An arc-suppression method based on the coordinated operation of the petersen coil and the static synchronous compensator in distribution networks[J]. Transactions of China Electrotechnical Society, 2019, 34(6): 1251-1262.
[7] 朱建鑫, 胡海兵, 陆道荣, 等. 应用于级联STATCOM的高精度低成本全FPGA实时仿真模型研究[J]. 电工技术学报, 2019, 34(4): 777-785.
Zhu Jianxin, Hu Haibing, Lu Daorong, et al.The research on fully FPGA-based real-time simulation with high fidelity and low cost for the cascaded STATCOM[J]. Transactions of China Electrotechnical Society, 2019, 34(4): 777-785.
[8] 曾祥君, 刘张磊, 马洪江, 等. 配电网电容电流实时测量技术[J]. 电力系统自动化, 2008, 32(3): 61-65.
Zeng Xiangjun, Liu Zhanglei, Ma Hongjiang, et al.A capacitive current real-time measuring technique for distribution networks[J]. Automation of Electric Power Systems, 2008, 32(3): 61-65.
[9] 宋晓燕, 孙岩洲, 宋紫嫣, 等. 基于零序PT二次侧注入信号的配电网电容电流测量新方法[J]. 电力系统保护与控制, 2014, 42(19): 134-138.
Song Xiaoyan, Sun Yanzhou, Song Ziyan, et al.A new method of distribution network capacitive current measurement based on injecting signals into the secondary side of the zero sequence PT[J]. Power System Protection and Control, 2014, 42(19): 134-138.
[10] 周求宽, 姚骏, 刘衍, 等. 基于三频率法的配电网电容电流测量新方法[J]. 电测与仪表, 2017, 54(10): 44-49.
Zhou Qiukuan, Yao Jun, Liu Yan, et al.A new method to measure capacitance current in distribution network based on three-frequency method[J]. Electrical Measurement ＆ Instrumentation, 2017, 54(10): 44-49.
[11] 刘力, 孙结中. 一种测量配电网电容电流的新方法[J]. 电网技术, 2001, 26(5): 63-65.
Liu Li, Sun Jiezhong.A newmethod to measure capacitance current in distribution network[J]. Power System Technology, 2001, 26(5): 63-65.
[12] 李景禄, 周羽生, 唐跃进. 偏置电容法电容电流测量的应用经验[J]. 电力自动化设备, 2004, 24(2): 99-100.
Li Jinglu, Zhou Yusheng, Tang Yuejin.Application experiences of capacitive current measuring with partially installing capacitor[J]. Electric Power Automation Equipment, 2004, 24(2): 99-100.
[13] 李晓波, 苗晓鹏, 桑振华, 等. 基于偏置阻抗法的配电网电容电流测量新方法[J]. 电力系统保护与控制, 2014, 42(4): 22-26.
Li Xiaobo, Miao Xiaopeng. Sang Zhenhua, et al.A new capacitive current measurement method of the distribution network based on bias impedance[J]. Power System Protection and Control, 2014, 42(4): 22-26.
[14] 刘宝稳, 李晓波. 基于失谐量的消弧线圈跟踪调谐方法[J]. 电力系统保护与控制, 2013, 41(5): 6-9.
Liu Baowen, Li Xiaobo.New type of automatic tuning arc-suppression coil based on detuning size[J]. Power System Protection and Control, 2013, 41(5): 6-9.
[15] 靳维, 袁朋生, 张洋, 等. 基于调整中性点接地阻抗的配电网电容电流测量方法[J]. 电力系统保护与控制, 2015, 43(7): 37-41.
Jin Wei, Yuan Pengsheng, Zhang Yang, et al.A method of measuring capacitive current in distribution network based on adjusting the neutral grounding impedance[J]. Power System Protection and Control, 2015, 43(7): 37-41.
[16] 贺良华, 葛来, 孙宝金. 基于谐振频率预测模型的配电网电容电流测量方法[J]. 电力系统自动化, 2018, 42(2): 143-147.
He Lianghua, Ge Lai, Sun Baojin.Capitcitivc current measuring methml for distribution networks based on resonant frequency prediction model[J]. Automation of Electric Power Systems, 2018, 42(2): 143-147.
[17] 闫腾飞, 李康, 李晓波, 等. 基于牛顿—拉夫逊法的配电网电容电流测量新方法[J]. 电力系统保护与控制, 2017, 45(7): 1-5.
Yan Tengfei, Li Kang, Li Xiaobo, et al.A new capacitive current measurement method of distribution network based on Newton-Raphson method[J]. Power System Protection and Control, 2017, 45(7): 1-5.
[18] 薛永端, 李娟, 陈筱薷, 等. 谐振接地系统高阻接地故障暂态选线与过渡电阻辨识[J]. 中国电机工程学报, 2017, 37(17): 5037-5048.
Xue Yongduan, Li Juan, Chen Xiaoru, et al.Faulty feeder selection and transition resistance identification of high impedance fault in a resonant grounding system using transient signals[J]. Proceedings of the CSEE, 2017, 37(17): 5037-5048.
[19] 廖小兵, 刘开培, 张亚超, 等. 基于区间泰勒展开的不确定性潮流分析[J]. 电工技术学报, 2018, 33(4): 750-758.
Liao Xiaobing, Liu Kaipei, Zhang Yachao, et al.Uncertain power flow analysis based on interval taylor expansion[J]. Transactions of China Electrotechnical Society, 2018, 33(4): 750-758.
[20] 康小宁, 屈亚军, 焦在滨, 等. 基于最小二乘矩阵束算法的工频分量提取方法[J]. 电力系统自动化, 2014, 38(21): 66-70.
Kang Xiaoning, Qu Yajun, Jiao Zaibin, et al.Power-frequency phasor extraction based on least square matrix pencil algorithm[J]. Automation of Electric Power Systems, 2014, 38(21): 66-70.