电磁-永磁复合型接触器数值仿真与控制方法

doi:10.19595/j.cnki.1000-6753.tces.190668

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3192 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to solve the problem that the permanent magnet contactor does not have the failure safety mode, an electromagnetic-permanent magnet composite contactor structure is designed. Due to the low simulation efficiency and low precision in the existing structure, an integrated electromagnetic simulation framework is proposed. In the electromagnetic-permanent magnet structure, the magnetic field distribution and the mechanical motion are solved by coupling the electric, magnetic, and mechanical governing equations. The electromagnetic variables and mechanical variables can be solved in the same discrete time period without additional lookup table and interpolations, which gives much higher calculation efficiency than the existing method. According to the simulation calculations, the electromagnetic-permanent magnet composite contactor control circuit and control logic with failure-safe mode are designed. The experimental test results show that the contactor can be successfully disconnected, entering the safety mode under the failure mode or the sloshing condition. Compared with traditional electromagnetic contactor, the proposed electromagnetic-permanent magnet composite mechanism is capable to save energy consumption over 90%.

Key words： Contactor failure safety mode electromagnetic-permanent magnet composited numerical simulation

Received: 14 March 2019 Published: 12 March 2020

PACS:

TM93

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhao Sheng
	Shu Liang
	Wu Ziran
	Chen Wei
	Xu Xiaofeng

Cite this article:

Zhao Sheng,Shu Liang,Wu Ziran等. Numerical Simulation and Control Method of Electromagnetic-Permanent Composite Contactor[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 1083-1092.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.190668 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/I5/1083

[1] 鹏飞, 杨文英, 翟国富, 等. 基于优化的传输线法的并行静磁场有限元方法[J]. 电工技术学报,2019,34(13): 2716-2725.
Peng Fei, Yang Wenying, Zhai Guofu, et al.An optimized parallel transmission line iteration for parallel finite element analysis in magnetostatic field[J]. Transactions of China Electrotechnical Society,2019,34(13): 2716-2725.
[2] 刘建强, 陈爱峰, 闫一凡, 等. 高速列车电磁接触器可靠性评估方法[J]. 电工技术学报, 2018, 33(2): 461-471.
Liu Jianqiang, Chen Aiwu, Yan Yifan, et al.Reliability evaluation method of electromagnetic contactor used in high-speed train[J]. Transactions of China Electrotechnical Society, 2018, 33(2): 461-471.
[3] 李逵, 李晓倍, 郑淑梅, 等. 基于BP神经网络的交流接触器剩余电寿命预测[J]. 电工技术学报, 2017, 32(15): 120-127.
Li Kui, Li Xiaobei, Zheng Shumei, et al.Residual electrical life prediction for AC contactor based on BP neural network[J]. Transactions of China Electrotechnical Society, 2017, 32(15): 120-127.
[4] 杨东升, 马占超, 高筱婷, 等. 交流接触器晃电保护无隙切换拓扑结构研究[J]. 电工技术学报, 2018, 31(11): 2431-2438.
Yang Dongsheng, Ma Zhanchao, Gao Xiaoting, et al.Research on voltage sag protection topology based on seamless switching for AC contactors[J]. Transactions of China Electrotechnical Society, 2018, 33(11): 2431-2438.
[5] 杨文英, 刘兰香, 刘洋, 等. 考虑碰撞弹跳的接触器动力学模型建立及其弹跳特性影响因素分析[J]. 电工技术学报, 2019, 34(9): 1900-1911.
Yang Wenying, Li Lanqiang, Liu Yang, et al.Establishing of contactor dynamic model considering collision bounce and analysis of influencing factors of bounce characteristics[J]. Transactions of China Electrotechnical Society, 2019, 34(9): 1900-1911.
[6] 石松宁, 王大志, 张瑞红, 等. 不等齿宽消弱永磁驱动器齿槽转矩的研究[J]. 仪器仪表学报, 2018, 39(6): 234-240.
Shi Songning, Wang Dazhi, Zhang Ruihong, et al.Research on the nonuniformly distributed teeth for reducing the cogging torque of permanent magnet drive[J]. Chinese Journal of Scientific Instrument, 2018, 39(6): 234-240.
[7] Chen Dezhi, Fang Liwei, Zhao Wenliang, et al.Design of a novel energy-saving contactor using two-phase magnetic material[J]. International Journal of Applied Electromagnetics and Mechanics, 2017, 56(1): 141-149.
[8] Lin Heyun, Wang Xianbing, Fang Shuhua, et al.Design, optimization, and intelligent control of permanent-magnet contactor[J]. IEEE Transactions on Industrial Electronics, 2013, 60(11): 5148-5159.
[9] 薛毓强, 吴金龙. 基于分布参数磁路模型的永磁接触器吸力特性[J]. 电工技术学报, 2014, 29(7): 222-228.
Xue Yuqiang, Wu Jinlong.Study of attractive force characteristics based on magnetic distributed parameter circuit model of permanent magnet contactors[J]. Transactions of China Electrotechnical Society, 2014, 29(7): 222-228.
[10] 汪先兵. 智能调节型永磁接触器合闸过程动态特性仿真与实验分析[J]. 系统仿真学报, 2014, 26(6): 1331-1336, 1342.
Wang Xianbing.Simulation and experiment analysis of dynamic characteristic for making process of intelligent adjustment permanent magnet contactor[J]. Journal of System Simulation, 2014, 26(6): 1331-1336, 1342.
[11] 吴自然, 舒亮, 许成文, 等. 一种新型永磁交流接触器及其控制电路[J]. 中国电机工程学报, 2016, 36(13): 3667-3673.
Wu Ziran, Shu Liang, Xu Chengwen, et al.A new permanent magnet AC contactor and its control circuit[J]. Proceedings of the CSEE, 2016, 36(13): 3667-3673.
[12] Rong Mingzhe,Lou Jianyong,Liu Yiying, et al.Static and dynamic analysis for contactor with a new type of permanent magnet actuator[J]. IEICE Transactions on Electronics, 2006, 89(8): 1210-1216.
[13] 房淑华, 林鹤云, 汪先兵, 等. 永磁安装位置对永磁接触器动态特性的影响[J]. 电工技术学报, 2009, 24(9): 93-98.
Fang Shuhua, Lin Heyun, Wang Xianbing, et al.Effect of permanent magnet arrangements on dynamic performance of permanent magnet contactor[J]. Transactions of China Electrotechnical Society, 2009, 24(9): 93-98.
[14] 房淑华, 林鹤云, 蔡彬, 等. 永磁接触器磁场有限元分析及控制单元设计[J]. 中国电机工程学报, 2006, 26(22): 162-164.
Fang Shuhua, Lin Heyun, Cai Bin, et al.Finite element magnetic field analysis and control unit of permanent magnet contactor[J]. Proceedings of the CSEE, 2006, 26(22): 162-164.
[15] Kawase Y, Yamaguchi T, Iwashita K, et al.3-D finite element analysis of dynamic characteristics of electromagnet with permanent magnets[J]. IEEE Transactions on Magnetics, 2006, 42(4): 1339-1342.
[16] Zhang Guogang, Chen Wei, Ke Chunjun, et al.Simulation and optimization of dynamic characteristics of intelligent AC contactor[J]. International Journal of Applied Electromagnetics and Mechanics, 2010, 33(1-2): 225-233.
[17] 纽春萍, 陈德桂, 李兴文, 等. 交流接触器触头弹跳的仿真及影响因素[J]. 电工技术学报, 2007, 22(10): 85-90.
Niu Chunping, Chen Degui, Li Xingwen, et al.Simulation of contact bounce of AC contactor and study of its influence factors[J]. Transactions of China Electrotechnical Society, 2007, 22(10): 85-90.
[18] Rong Mingzhe,Lou Jianyong,Liu Yiying, et al. Static and dynamic analysis for contactor with a new type of permanent magnet actuator[J]. IEICE Transactions on Electronics, 2006, E89-C(8): 1210-1216.
[19] 刘颖异, 陈德桂, 纽春萍, 等. 带电压反馈的智能接触器动态特性及触头弹跳的仿真与研究[J]. 中国电机工程学报, 2007, 27(30): 20-25.
Liu Yingyi, Chen Degui, Niu Chunping, et al.Analysis and simulation of dynamic behavior and contact bounce for an intelligent contactor with feedback mechanism[J]. Proceedings of the CSEE, 2007, 27(30): 20-25.
[20] Fang Shuhua, Lin Heyun,Ho Siu Lau.Magnetic field analysis and dynamic characteristic prediction of AC permanent-magnet contactor[J]. IEEE Transactions on Magnetics, 2009, 45(7): 2990-2995.
[21] 许志红, 张培铭, 戴小梅. 智能交流接触器电磁机构动态分析[J]. 福州大学学报: 自然科学版, 2005, 33(4): 468-476.
Xu Zhihong, Zhang Peiming, Dai Xiaomei.Dynamic analysis of electromagnetic system of intelligent AC contactor[J]. Journal of Fuzhou University: Natural Sciences Edition, 2005, 33(4): 468-476.
[22] Ruiz J R, Espinosa A G.A novel parametric model for ac contactors[J]. IEEE Transactions on Magnetics, 2008, 44(9): 2215-2218.
[23] Ruiz J R, Espinosa A G, Romeral L.A computer model for teaching the dynamic behavior of AC contactors[J]. IEEE Transactions on Education, 2010, 53(2): 248-256.
[24] Wang Xianbing, Lin Heyun, Ho Siu Lau, et al.Analysis of dynamic characteristics of permanent magnet contactor with sensorless displacement profile control[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1633-1636.